David Clark 19602P-49 Antenna Mount Installation Guide
- August 19, 2024
- David Clark
Table of Contents
David Clark 19602P-49 Antenna Mount
This guide provides step-by-step instructions for installing an antenna with an antenna mount on the roof of an apparatus.
Components
- Antenna
- Antenna Mount
- O-Ring
- Roof of Apparatus
- Step Washer
- Lock Washer
- Hex Nut
Installation Diagram
The diagram below illustrates the assembly of the antenna with its mount:
- Antenna: The topmost component, which is mounted on the antenna mount.
- Antenna Mount: The component that holds the antenna in place.
- O-Ring: A ring-shaped component that provides a seal between the antenna mount and the roof of the apparatus.
- Roof of Apparatus: The surface on which the antenna mount is installed. A hole with a minimum diameter of 0.750 inches is required.
- Step Washer: A washer that fits into the hole on the roof of the apparatus.
- Lock Washer: A washer that prevents the hex nut from loosening.
- Hex Nut: The nut that secures the entire assembly.
Specifications
| Component | Description |
|---|---|
| Antenna | The primary component that receives or transmits signals. |
| Antenna Mount | The structure that supports the antenna. |
| O-Ring | A sealing ring to prevent leaks. |
| Roof of Apparatus | The installation surface with a hole of 0.750 inches |
minimum diameter.
Step Washer| A washer that fits into the hole on the roof.
Lock Washer| A washer that prevents the hex nut from loosening.
Hex Nut| The nut that secures the assembly.
FAQs
What is the minimum hole diameter required on the roof of the apparatus?
The minimum hole diameter required is 0.750 inches.
What is the purpose of the O-Ring?
The O-Ring provides a seal between the antenna mount and the roof of the apparatus to prevent leaks.
How does the lock washer function?
The lock washer prevents the hex nut from loosening over time.
Can this installation be done on any type of roof?
Yes, as long as the roof can accommodate a hole with a minimum diameter of 0.750 inches.