MARINFLOC OMD-24 Deckma Hamburg Instructions
- August 18, 2024
- MARINFLOC
Table of Contents
Service Bulletin
no. 21, 2019-03-26
Seals on the Deckma OMD-24, 15 ppm bilge alarm
System applicability: Marinfloc Oily Water Separators and Marinfloc WhiteBoxes supplied with the Deckma OMD-24 oil content monitor
Background
Deckma fasten sticker seals on their OMD-24 oil content monitor computer
units, on the oil content monitor cells and on the magnetic valve attached to
the oil content monitor. This service bulletin highlights those seals and is a
reminder of never removing/breaking them. The seals serve as a proof that the
equipment has never been tampered with.
-
Oil content monitor computer unit
The OMD-24 EV bilge alarm is sealed according to picture no. 1. Do not break the yellow seal. -
Oil content monitor cell
One seal sticker in combination with a metal clip on the measuring cell (label works as seal), see picture no. 2. Do not remove the sticker. -
The magnetic valve
One seal sticker and two sealed screws on top of the valve, see picture no. 3. Do not remove the seals. You are not allowed to open up the valve for cleaning purposes, you are only allowed to replace the valve with a new one. The two sealed screws should never be opened. Some valves distributed are missing the sticker (PN 00212381/00314402) on the bottom of the valve but the screws are sealed with the red paint.
Picture 1. Oil content monitor – computer unit
Picture 2. Oil content monitor – cell
Picture 3. Magnetic valve
Source: Deckma official letter: Seals on the OMD-24, 15 ppm Bilge Alarm
Marinfloc AB
Industrivägen 10
472 95 Varekil, Sweden
Marinfloc Service Bulletin no. 21, ver. 1.0
Phone: +46 304 60 63 00
marinfloc@marinfloc.com
www.marinfloc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>