HPRT 2TS24E Portable Photo Printer Instruction Manual

HPRT 2TS24E Portable Photo Printer

Specifications

• Product Name: Portable Photo Printer
• Printer Model: HCP-2TS24E
• Dimensions: 1519763mm
• Weight: Bare machine 410g
• Print Method: Thermal Dye Sublimation
• Print Size: 54*86mm
• Print Resolution: 300dpi
• Battery Capacity: 1150mA
• Charging Interface: 5V / 2A type-C Interface
• Operating Temperature: 5~35°C

Product Usage Instructions

Consumable Installation Instructions

1. Open the Paper Inlet Cover by dialing the switch and placing a consumable in the compartment as directed.
2. Press the consumable into place until it clicks and then close the compartment.

Note:

• The photo paper is sensitive to moisture, use it promptly after opening.
• Only use official photo paper with ribbon, do not replace it yourself.
• Avoid direct sunlight and low temperatures, and do not force damaged consumables into the device.

Printing Instructions

1. Press the Power Button to turn on the printer.
2. Select or take a picture, edit as desired, and click the Print Button to print.

APP Download Instructions

1. Scan the QR code to download the HeyPhoto APP.
2. Open the APP, add the device, connect to Z3-XXXX, and follow the Wi-Fi connection prompts.
3. Select a picture from the app and click print.

Note

• Printer will auto-connect for subsequent use after the first connection.
• Do not exit the APP during printing to avoid failures.
• APP interface may vary with versions.

Function Button Operation Instructions

• Power Button: Turn on/off the printer.
• Shutter Button: Short press to shoot.
• Rotates Button: Rotate filters selection (8 options).
• Print Button: Short press to start printing.
• Up/Down Buttons: Toggle screen proportions.
• Left/Right Buttons: Switch between jigsaw puzzles during photo shoot.
• OK/Menu Button: Enter view mode or photo settings menu.
• Return Button: Return to previous menu or switch modes.

Frequently Asked Questions (FAQ)
Q: Can I use any photo paper with this printer?
A: No, only official photo paper provided with the ribbon should be used to ensure proper functionality.
Q: What should I do if the consumable is damaged?
A: Do not force a damaged consumable into the device; replace it with a new one following installation instructions.

Product Introduction

Accessories

Note: The items in the package are actually based on the order .

Bottom view

Inner

Product parameters

Consumable Installation Instructions

1. Open the Paper Inlet Cover
   As shown, dial the Paper Inlet Cover switch and open the Paper Inlet Cover.

2. Take out a consumable, put it into the compartment according to the direction shown below,place your finger in the “push”position and press it into place until it makes a“click”sound;

3. Close the consumble compartment.

4. The photo parer is susceptible to moisture,please use it as soon as possible after opening.

5. This device only supports official photo paper that comes with the ribbon,please do not replace it by yourself.

6.  Avoid excessive direct sunlight and low temperature.

7.  If the consumable is damaged or deformed by external force, please do not insert it into the deviceby force.

Printing Instructions

APP Download

1. After the first connection, you just need to click the print icon for subsequent use, the printer will be automaically connected and print.
2. Do not exit the APP during the printing process, this may cause printing failure.
3. App Page may change with the version, please refer to the actual interface.

Function button operation instructions

Tip

1. press any key to open the screen while resting.
2. When the printer can not be shut down under unusual circumstances, you can use the paper clip to press the“ Reset” button to force the device to shut down.

Precautions Battery

1. The best working temperature of the printer is 5℃~35℃，
   If the ambient temperature is too high, the printing quality may be affected;

2. Please use official ribbon and photo paper to ensure print quality;

3. Avoid disassembling the ribbon and photo paper by yourself.
   If the glossy surface of the photo paper is polluted, the printing quality will be affected;

4. Do not pull out the consumable forcibly during printing, this may damage the printer;

5. When not in use for a long time, close the consumable compartment to keep things like dust out;

6. After printing multiple photos in a row, the device may activate overtemperature protection, which is normal, and the current task will continue to be printed after cooling;

7. Do not perform any operations while the device is turning on.

Operating Environment

1. Place the printer on a desktop or other flat, stable surface;
2. Please make sure that there is more than 10 cm space in the printer’s paper outlet.

Battery Charging

1. When the battery power is low，please charge it by the equipped USB cable in time.if you continue printing,it may power off automatically.

2. Plug one end of the USB cable into the printer’s port,and connect the other end to the power adapter.after connecting, the printer enters a charging state, at which point printing will interrupt the charging state.

3. The charging time is about 90-120 minutes, the screen can be lit up to see the charging status.

4. The printer can be charged via computer or adaper with USB cable. Please note that the adapter is not equipped with the printer. Users who use power adapters for charging should purchase and use power adapters that are certified for safety and meet the requirements of the standard.

5. Users are prohibited from disassembling the machine by themselves, if replacing the wrong model of battery will be at risk of explosion. Please be sure to dispose of the used battery according to the instructions.

6. When the printer is low power, please charge it for a period of time before using it, so as to avoid interrupting printing due to insufficient power during use.

WARNING: Operating this device may cause radio interference in a residential environment.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consultthe dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Xiamen Hanin Co.,Ltd.
www.hprt.com
support@hprt.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>