HPRT MT53 Portable Pocket Photo Printer User Guide
- June 5, 2024
- HPRT
Table of Contents
HPRT MT53 Portable Pocket Photo Printer
Start Your Photo Printer
Note: The packing items are actually dependent on the order.
Paper Loading
Steps & Notes
-
Place your hands on both sides of the top cover, push it towards the direction as shown on figure 1.
-
Take out one packet of photo paper (including 5pcs or 10pcs of photo paper and 1pc of blue card), and place them into the printer as shown on Figure 2. The photo side should face down.
Please note that never place more than 10pcs of photo paper, and use the photo paper specially for the printer, -
Assemble the top cover.
Precautions for Photo Paper
- The photo paper is easy to get damp, please use it as soon as possible after opening.
- Avoid excessive direct sunlight and over-low temperatures.
- Avoid device damage caused by using non-special paper.
- Do not fold or damage the paper
How to Print
Steps & Notes
- Hold down the power button for 3 seconds, the printer will be turned on.
- Open the photo printer APP.
- Choose “MT53”, select the photos and enter “Print Preview.”
- Click the print icon and enter “Searching printer”, allow to turn on the Bluetooth.
- Select the printer and then click it to pair automatically. Return to “Print Preview” after the connection is successful.
- Click the print icon again and the printer will start printing
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Scan the QR code to download APP.
Xiamen Hanin Electronic Technology Co., Ltd. ADD: 5F, 8#, Aide Airport
Industrial Park, Huli District, Xiamen, China TEL: +86-(0)592-5885991 WEB:
www.hprt.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>