HPRT HN-72728HD-000R Handheld Barcode Scanner User Manual
- May 15, 2024
- HPRT
Table of Contents
HPRT HN-72728HD-000R Handheld Barcode Scanner
Product Specifications
- Model: HN-72728HD-000R
- Interface: RJ45, Type-C
- Power: USB charging
- Wireless Connectivity: Bluetooth
- Indicator Lights: Scanner Indicator, Charging Indicator, LED Indicator
- Compatibility: Compatible with various hosts
Product Usage Instructions
Power On/Off and Restart
To power on the scanner, simply plug it in. It will automatically power on
when connected to the host. To power off, the scanner will automatically power
off after unplugging the cable. In case of a crash or unresponsiveness, re-
plug the cable to restart.
RJ45 Connection
Connect the RJ45 end of the USB data cable to the communication charging
base and the USB end to the host.
Type-C Connection
For Type-C connection, connect the Type-C end of the USB data cable to the
communication charging base and the USB end to the host.
Maintenance
Keep the reading window clean by using a soft cloth. Avoid scratching the
window with rough objects. Use a brush to remove stains and do not spray any
liquid on the window.
Use of Rotary Keys
Press the rotation key to adjust the angle of the scanner as needed for
better scanning.
Charging
To charge the scanner, insert it into the base in the correct direction for
charging.
Restore Factory Default
Scan the barcode provided in the manual to restore all settings to factory
defaults. Note that this action will reset all current parameters.
FAQ
-
Q: How do I know if the scan was successful?
A: The LED indicator will light up green when the scan is successful. -
Q: What should I do if the scanner crashes?
A: Re-plug the cable to restart the scanner. If issues persist, contact customer support.
Appearance
- Scan Window
- Scan Button
- Charging Contact
- Shutdown Key
- Bluetooth Light
- Charge Indicator
- Rotate Key
- RJ45 Interface
- Type-C Interface
- Scanner Indicator
Power on/off and Restart
Power on:
Can be used as soon as it is plugged in. After it is connected to the host, it
will be automatically power on.
Power off:
Automatically power off after unplugging the cable.
Restart:
If the scanner crashs or does not respond, please re-plug the cable.
Maintenance
The reading window must be kept clean. Avoid hard and rough objects to scratch
the reading window. Remove the stains from window with a brush. Please use a
soft cloth to clean the window, such as glasses cloth. Do not spray any liquid
on the window Do not use any cleanner other than cleaning water.
RJ45 Connection
- Connect the device interface end (RJ45 interface) of the USB data cable to the communication charging base;
- Connect the host interface end (USB interface) of the USB data cable to the host.
Type-C Connection
- Connect the device interface end (Type-C interface) of the USB data cable to the communication charging base;
- Connect the host interface end (USB interface) of the USB data cable to the host.
Use of rotary keys
Press the rotation key, lift or lower the fuselage by hand, and adjust the fuselage angle.
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Warning
Warning:
Changes or modifications to this unit not expressly approved by the part
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Charging
Insert the scanner into the base in this direction to charge.
Restore Factory Default
Scan the barcode to restore all settings to the factory default state.
Note: Please use the “factory reset” function carefully. After reading this barcode, the current parameter settings will be lost and replaced with the factory default values.
Buzzer
LED Indicator
Interface Setting
The scanner can communicate with the host by RS-232 serial port or USB port. The user can switch to the corresponding interface by replacing the data line and scanning the corresponding barcode below.
- RS232 Serial Port Barode
- HID Virtual Keyboard The scanner can be simulated into HID-KBW device when using the USB port.In this mode, the scanner will output data to the host as a virtual keyboard.
- USB Virtual Serial Port When the scanner uses the USB port, but the host receives data by serial port, the scanner can be set to the USB virtual serial port (This feature requires the
appropriate driver to be installed on the host).
Scanning Mode Setting
Scan mode settings by scanning the barcode below
Other
- Aiming Barcode
- Read Successfully Barcode
Common Problem
Q: There are some barcodes can not be scanned.
A:
- Firstly, check the barcode type, open the barcode function; if it is verified, try to turn off.
- Unable to know the barcode type, then set all barcodes allow to be recognized.
Q: The barcode data is incorrect.
A: Check the error display of barcodes (all barcodes errors or specific
barcode error)
Q: Bar code can be recognized but not displayed
A: Firstly, confirm the working mode of the scanner. If it is in RS-232
serial port mode, you need to connect with serial cable; if it is in USB
virtual serial port mode, you need to connect with USB cable, and the host
accepts with serial port tool. Both modes need to ensure that the serial port
attribute of the serial port tool on the host is consistent with the serial
port attribute of the device. If it is connected with a HID virtual keyboard,
then directly connected by a USB cable.
Q: Aiming Light and LED are not bright.
A:
- Check whether the device is powered on.
- Re-plug the data cable.
State
- Our company does not assume any responsibility for losses caused by natural disasters (such as earthquakes, floods, etc.) that exceed our scope of responsibility.
- In any case, our company does not assume any responsibility for losses caused by using this product, such as loss of profits, loss of reputation, business interruption, loss or change of stored data, and any special, unexpected, associated or intermittent losses ca-used by the above.
- Our company does not assume the responsibility for the losses caused by due to improper use of hardware or software not specified by the our company .
- Our company does not provide any form of warranty or technical support for the information, data, files, other products, services obtained though the use of this product, and does not assume any responsibility for the use of above description by users.
- Our company are not take any form of guarantee for third-party software used by this product.
- Due to the continuous improvement of the products, the operation and common problems of the models described in the manual are mainly based on actual machines.
- And it may be changed without notice.