PawHut D02-179V02 Dog Kennel Outdoor for All Breed Dogs Instruction Manual
- August 17, 2024
- PawHut
Table of Contents
PawHut D02-179V02 Dog Kennel Outdoor for All Breed Dogs
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Box Contant
Hardware
Assembly Instruction
Installing The Chain Link Mesh
First start by unrolling the compressed chain-link mesh roll on the ground and
extending it. Then check whether the mesh wires are misaligned and unhooked,
and restore it. Next roll it again.
And use ties(I)to fix one side of the mesh on the braided door frame. After
that wrap the mesh around the dog kennel. During the process of enclosing, use
ties (I)to fix the mesh up and down to prevent it from slipping. After that
tighten the mesh and fix it to another doorframe pillar and remove the excess
mesh. Finally reinforce and fix with steel wire(H).
Notice
- Need 2 people at least when you assemble to avoid the damage of steel tube.
- Do not use this cage unless all bolts, screws and knobs are firmly secured.
- Please use it on a flat hard ground.
- No climbing and no revision on product.
- Caution, hands pinching.
Warning:
- A: Guarantee every post upright
- B: Fasten (C) with Rand electric tool in the right direction.
- C: Make sure every (C) assembled correctly before put your kennel in use.
Customer Support
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA