MAXIM LIGHTING 57316 Float 16Cm LED Flush Mount Owner’s Manual

MAXIM LIGHTING 57316 Float 16Cm LED Flush Mount

Specifications

• Item/Model Number : 57316 Float 16 LED Flush Mount
• Lamping Ampoule : 1xLED 38W (Included)
• Input Power : 56.5W Max
• Input Voltage : 120-277Vac
• Output Voltage : 18-49Vdc 1000mA
• Dimensions : L3.5 x W1.9 x H1.1 inches
• Dimmable : Yes, Triac Dim

Product Usage Instructions

Installation

1. For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion.
2. Leave a gap at the bottom to allow moisture to escape.
3. Ensure the mounting bracket is securely attached using the provided screws.
4. Connect the wires following the color codes (Black to Black, White to White, Red to V+, Black to V-).

Dimmer Compatibility:
The product is compatible with the following dimmers:

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Diva Caseta PD-6WCL
• Lutron Maestro MACL-153M
• DEAKO-Smart Dimmer
• DEAKO-Single Dimmer
• LEVITON 6672-L
• LEVITON DSLO6

For more dimmer options, visit Maxim Lighting’s LEDDimmer Compatibility List.

Important Notes: This product must be installed by an experienced professional with critical knowledge of electronic lighting systems.

Item/Model Number : 57316
Float 16″ LED Flush Mount

Lamping : 1xLED 38W(Included)

Please consult a qualified electrician prior to install

Before Getting Started

1. Read the instructions carefully prior to assembling the product.
2. When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
3. Carefully remove all packaging materials and retain for future use.
4. Keep all hardware parts and packaging out of reach of children.
5. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
6. Ensure that you have all required contents for complete assembly.
7. Take care when lifting. Assemble the product in close proximity to where you intend to install it.
8. Do not over tighten the screws and bolts as this may damage the threads.
9. Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

1. Carefully read through the instruction sheet before assembly and using the product.
2. Caution there is a risk of shock!
3. Disconnect from power source before assembling or cleaning.
4. Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
5. Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
6. Check the product cord to be sure is free torn or frayed.

WARNING : Wires must to be connected to low voltage driver and should not be connected directly to live wire or a short may occur.
WET LOCATION : For outdoor use, caulk around
EXTERIOR fixture with silicone sealant to prevent water intrusion.

Cleaning & Maintenance

1. On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
2. For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
3. Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
4. Periodically (every 90-180 days) make sure that the screws are fully tightened.
5. Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

PARTS

Before getting,started, ensure the package contains the following components:

Installation

This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.

DIMMER COMPATIBILITY

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required
IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH DO NOT CUT FACTORY-MADE CONNECTIONS.

WIRING DIAGRAM

AC: 120-277V~50/60HZ

LED DRIVER DIAGRAM

SCHEMATIC FOR GENERAL REFERENCE ONLY

VERIFIED LIST OF TESTED DIMMERS

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Diva Caseta PD-6WCL
• Lutron Maestro MACL-153M
• DEAKO-Smart Dimmer
• DEAKO-Single Dimmer
• LEVITON 6672-L
• LEVITON DSLO6

GENERAL COMPATIBILITY TRIAC / FORWARD PHASE ELV / REVERSE PHASE ONLY at 120VAC Due to inrush current, wattage should not exceeed 150W on a 600W dimmer

IMPORTANT!
If the control is not paired properly to LED fixtures, irreparable damage may occur. If the dimmer you are using is not listed here, consult a lighting professional or view our
Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer

© 2024 MAXIN LIGHTING
MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required

FAQ’s

Q: Is the LED driver included in the package?
A: Yes, the LED driver (Model: NE046277100-2GH) is included in the package.

Q: Can this fixture be used indoors?
A: While designed for outdoor use, this fixture can also be used indoors if desired.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>