PawHut D00-123 Pet Stroller Instruction Manual

PawHut D00-123 Pet Stroller

Product Specifications

• Model: IN230300088V01_GL
• Version: INdab021V01_US_CA_UK_FR_D00-123
• Maximum Weight Capacity: 25kg

Product Usage Instructions

Assembling the Stroller

1. Open the box and remove all parts from the PE bag.
2. Pull up the handle until you hear a click sound to assemble it.
3. Open two supporting wires and secure the safety belts through the holes with Velcro. Close the canopy with the zipper.
4. Attach the front wheels by pushing them onto the frame until you hear a click.
5. Install the rear wheel mount and lock the screws.

Using the Stroller

1. To brake the rear wheels, step down on the brake rod. Pull upward on the brake rod to unlock.
2. Install the pet cage by inserting the connector joint into the socket until you hear a click sound.
3. To fold the product, rotate the folding bar, pull up the connectors on both sides of the stroller, and press down the handle.
4. Always use the safety belt when your pet is in the cradle.
5. Adjust the handle by pressing down the buttons on both sides and then adjusting.

Cleaning and Maintenance

1. Unsnap buttons on the stroller.
2. Take apart the canopy.
3. Remove the cushion.
4. Wipe the stroller gently for cleaning.

Warning

1. For pets only.
2. Do not leave pet in stroller unattended.
3. Always apply the brake whenever the stroller is stationary.
4. The maximum weight capacity is 25kg.
5. Do not use any component not supplied by manufacturer.

Frequently Asked Questions (FAQ):
Q: Can this stroller hold pets heavier than 25kg?
A: No, the maximum weight capacity of this stroller is 25kg. Exceeding this limit may cause damage or malfunction.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Operation frame

• Open the box, take the frame and all parts from pe bag, pull up the handle as picture 1-1.
• Keep pulling the handle upward till soundclick.

ASSEMBLE PET BAG

• Open two supporting wires as figure 2-1.
• Put the safety belts through the holes, then fasten the velcro as figure 2-2.
• Close the canopy by zipper as figure 2-3.

Assemble front wheels

• Put on front wheels: push the front wheels on the frame till sound click as picture 3-1.
• Remove front wheels: press down the button as picture 3-1, while pulling up the stroller by another hand as picture 3-2.

Assemble real wheels

• *Install the rear wheel mount, and then lock the screws.

• • Pressing down the button in the centre of wheels,put on the axle Open the net part .

• *Open and close the net part through zip as picture 6.

Brake

• • Brake rear wheels: step down the brake rode can park the stroller; pull upward the brake rod to unlock.

Install the pet cage

• • Install the pet cage: Hold the pet cage by both hands and insert the connector joint into the socket till a sound“click” as picture 8-1.Then install the fixing hook

Folding product

• *Rotate the folding bar as shown in the figure, Pull up the connectors on both side of stroller at same time, press down the handle.

Safety belt

• *Please use safety belt while the pet is in cradle.

Adjusting handle

• Press down the buttons on both side of handle and then adjust WARNING

  1. For pets only.
  2. Do not leave pet in stroller unattended.
  3. Always apply the brake whenever the stroller is stationary.
  4. The maximum weight capacity is 25kg.
  5. Do not use any component not supplied by manufacturer.

Cleaning and maintenance

1. Unsnap button on stroller;
2. Take apart the canopy;
3. Take out the cushion;
4. Wipe stroller slightly.

If you have any questions, please contact our US customer care center, Our contact details are below: © 001-877-644-9366 customerservice@aosom.com
Imported by Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>