behringer HA8000 Powerplay 6-Channel High-Power Headphones Mixing and Distribution Amplifier User Guide

behringer HA8000 Powerplay 6-Channel High-Power Headphones Mixing and

Distribution Amplifier

Product Information

Specifications

• Product Name: POWERPLAY HA8000/HA6000
• Type: 8/6-Channel High-Power Headphones Mixing and Distribution Amplifier
• Version: 5.0

Product Usage Instructions

Installation
Before installing or operating the device, refer to the information on the exterior of the bottom enclosure for electrical and safety information. Ensure that the product is connected to a MAINS socket outlet with protective earthing connection.

Usage
Use only attachments and accessories recommended by the manufacturer. Unplug the device during storms or when not in use for a long period. Do not place naked flame sources on the apparatus.

Maintenance
Clean the product only with a dry cloth. Avoid placing objects filled with liquids on the apparatus. Do not place lighted candles or other naked flame sources near the device.

FAQ

• Q: What should I do if the provided plug does not fit into my outlet?
  A: If the plug does not fit, consult an electrician for the replacement of the obsolete outlet.

• Q: How can I prevent tip-over when moving the cart/apparatus combination?
  A: Use caution when moving the cart/apparatus combination to prevent tip-over.

Quick Start Guide

POWERPLAY
HA8000/HA6000
8/6-Channel High-Power Headphones Mixing and Distribution Amplifier

Important Safety Instructions

Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

Caution
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Warning Please refer to the information on the exterior of the bottom enclosure for electrical and safety information before installing or operating the device.

1. Please read and follow all instructions and warnings.
2. Keep the apparatus away from water (except for outdoor products).
3. Clean only with a dry cloth.
4. Do not block ventilation openings. Do not install in a confined space. Install only according to the manufacturer’s instructions.
5. Protect the power cord from damage, particularly at plugs and appliance sockets.
6. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
7. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades of the polarized or a grounding plug. A polarized plug has two blades with one wider than the other (only for USA and Canada). A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
8.  Protect the power cord from damage, particularly at plugs and appliance sockets.
9. Use only attachments and accessories recommended by the manufacturer.
10. Use only specified carts, stands, tripods, brackets, or tables. Use caution to prevent tip-overs when moving the cart/apparatus combination.
11. Unplug during storms, or if not in use for a long period.
12. Only use qualified personnel for servicing, especially after damage.
13. The apparatus with a protective earthing terminal shall be connected to a MAINS socket outlet with a protective earthing connection. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
14. Avoid installing in confined spaces like bookcases.
15. Do not place naked flame sources, such as lighted candles, on the apparatus.
16. Operating temperature range 5° to 45°C (41° to 113°F).

LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2024 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at community.musictribe.com/support

POWERPLAY HA8000/HA6000
POWERPLAY HA8000/HA6000 Hook–up

1. Step 1: Hook–Up
   HA6000 headphone distribution
   HA8000 in a recording studio environment
   

2. Step 2: Controls

3. The MAIN METER displays the input level of the MAIN INPUT connector(s) and the DIRECT IN connector on the HA6000. When the HA8000 is powered on, the green ON LED will light up.

4.  The MASTER LEVEL knob(s) adjust the level of the MAIN INPUT signal. The HA8000 has individual knobs called MAIN IN 1 and 2 which control the 2 pairs of MAIN IN jacks.

5.  The DIRECT IN jack (HA6000 only) allows stereo signals to be connected via ¼” TRS cable.

6. The PHONES OUT jacks allow headphones to be connected to each channel for individual monitoring.

7. The CHANNEL METER displays the output level of each individual channel.

8. The OUTPUT LEVEL knob adjusts the channel’s volume.

9. The IN 1/IN 2 button (HA8000 only) selects whether the MAIN IN 1 or 2 signal is sent to that channel.

10. (Engage the HA8000’s MONO button to convert the channel’s signal to mono.

11.  The L/R MONO buttons allow the HA6000’s input signal to be heard in mono.

12. The HA6000’s BALANCE knob adjusts the ratio between the MAIN/DIRECT IN signals and the AUX IN. If nothing is connected to the channel’s AUX IN jack, then the BALANCE knob controls the stereo balance of the MAIN signal.

13. The BASS knob adjusts the channel’s low frequencies (HA6000 only).

14. The TREBLE knob adjusts the channel’s high frequencies (HA6000 only).

15. The POWER button turns the unit on and of.

16. The MAIN INPUT connectors allow source audio to be sent to all channels. The HA6000 accepts a single stereo signal via ¼” or XLR jacks. The HA8000 has a pair of ¼” stereo inputs, and each set has its own volume control. Note that the MAIN signal is muted for channels with a cable connected to the DIRECT IN jack.

17.  The MAIN OUT connectors (HA6000 only) send the signal from the MAIN INPUT jacks directly out via ¼” or XLR.

18. An extra PHONES OUT jack is available on the rear panel of the HA8000.

19. The DIRECT INPUT jacks on the HA8000 accept signals via ¼” cables. When a connection is made to this jack, the MAIN INPUTS are muted in the respective channel.

20.  The AUX IN jacks on the HA6000 accept signals via ¼” cables. The signal can be mixed with the MAIN IN signal via the channel’s BALANCE knob. If a ¼” TS cable is used to connect to the AUX IN jack, it is recommended to press the channel’s MONO button so that the signal is heard in both ears.

21. The OUT jacks on the HA6000 echo the front panel PHONES OUT jacks.

HA8000

Specifications

POWERPLAY HA8000/HA6000
Other important information

Important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

2.  Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity,
   you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

Behringer
POWERPLAY HA8000/HA6000

• Responsible Party Name: Music Tribe Commercial NV Inc.
• Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
• Email Address: legal@musictribe.com

POWERPLAY HA8000/HA6000
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Important information

• Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.
• Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU,Directive 2014/30/EU, Directive 2011/65/EU and Amendment
• 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
• Full text of EU DoC is available at https://community.musictribe.com/
• EU Representative: Music Tribe Brands DK A/S
• Address: Gammel Strand 44, DK-1202 København K, Denmark
• UK Representative: Music Tribe Brands UK Ltd.
• Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom

References

• Behringer | Home
• Music Tribe
• Music Tribe
• Music Tribe
• Music Tribe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>