Yealink SmartVision 60 Video Conferencing Camera Installation Guide
- August 18, 2024
- Yealink
Table of Contents
Yealink SmartVision 60 Video Conferencing Camera
Package Contents
NOTE
We recommend that you use the accessories provided or approved by Yealink.
The use of unapproved third-party accessories may result in poor performance
Hardware Introduction
| NO. | Name | Description |
|---|---|---|
| 1 | Mute Button & Mute LED Indicator | Touch to mute or unmute. |
| --- | --- | --- |
| 2 | Camera Button & Camera LED Indicator | Touch to turn the camera on or off. |
| 3 | DC15 V | Connect to the power adapter. |
| 4 | USB-C Port | Connect to the MCore Pro. |
| 5 | Reset Button | Reset to factory defaults. |
| 6 | Security Slot | Connect a universal security cable to the SmartVision 60 so |
that you can lock it down.
7| Circular LED Indicator| Indicate the device status and Cortana status.
8| Privacy Cap| Automatically cover the camera when it is turned off.
9| Camera| Camera.
LED Indicator
Mute LED indicator
| LED Status | Description |
|---|---|
| Off | The device is powered off. The device is idle. |
| Solid green | Unmuted in the meeting. |
| Flash green | Incoming call/meeting. |
| Solid red | Muted in the meeting. |
| Flash red | The device is entering recovery mode for firmware upgrade. |
| Solid orange | The device is starting up. |
| Flash orange | The firmware is updating. |
Camera LED indicator
| LED Status | Description |
|---|---|
| Off | The device is powered off. The device is idle. |
The camera privacy cover is closed.
Solid purple| The camera privacy cover is open In the meeting.
Circular LED indicator
LED Status
Off
| Description
The device is powered off.
---|---
Solid white| The device is idle.
White breathing light| Cortana Listening status.
Half of the LED flashes, with the first segment in blue and the second segment
in white| Cortana Thinking status.
Blue and white breathing light flash alternately| Cortana Response status.
Installation
Assemble your SmartVision 60
Paste on a table
Place SmartVision 60 in a Meeting Room
NOTE It is recommended that you can deploy the SmartVision 60 at about 1/3 of the front of the conference table. The distance between the SmartVision 60 and the seats should be around 3.5~4 meters for optimal audio and video effects.
Connection
NOTE Not included accessories requirements:
Display : Resolution of 1080p or higher and with an HDMI port.
Ethernet cable: CAT5e or higher ethernet cable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>