WishRing K18 Anti Spy Detector User Guide

WishRing K18 Anti Spy Detector

Product Information

Specifications:

• Model: K18
• Frequency Range: 1MHz-810MHz
• Probe Dynamic Range: >73dB
• Detection Sensitivity: ≤0.03mv
• Detection Range: 15 square meters
• Mobile Phone Spectrum: 2G, 3G, 4G
• Signal Power Supply: Built-in 3.7V 1000mAh polymer lithium battery
• Charging Time: 2.5 hours
• Operating Current: 60-100mA, continuous working 4-5 hours
• Material: ABS metal
• Weight: 150g
• Volume: 117 x 56 x 20 mm

Product Usage Instructions

Installation and Setup:

1. Firstly, install the antenna by connecting it to the antenna interface.
2. Turn the knob clockwise to power on the device.
3. When the Power LED and MS LED light up, RF signal detection is activated.

RF Signal Detection:
Short press the Laser switch to turn on/off the LED laser lamp. Long press the Laser switch to change the flashing frequency of the LED laser lamp. Keep the environment dark and point the laser light towards suspicious cameras. Look through the laser lens to determine the position of the camera based on the reflected light.

Magnetic Field Detection:
Place the magnetic probe near the area to test for magnetic fields.

Car Tracker Detection:
To search for a car tracker, drive the vehicle to an area with weak signals. Turn off devices that emit signals, such as mobile phones, to help locate the tracker.

FAQ:

• Q: What should I do if the device is not detecting signals effectively?
  A: Ensure that the antenna is properly installed and that there are no obstructions blocking the signal detection. Try adjusting the sensitivity using the On/Off key & Sensitive adjuster.

• Q: How can I maximize battery life?
  A: Charge the device fully before initial use and avoid continuous operation for extended periods to conserve battery power.

• Q: Can I use this product in all countries?
  A: The device complies with FCC regulations; however, please check local laws and regulations regarding the use of signal detection equipment in your specific location.

PACKING LIST

INTRODUCTION

The K18 detector adopts German advanced technology and is designed for the market of all kinds of bugs, surveillance cameras, wireless pinhole cameras, car trackers, mobile phone undercover software, casino fraud devices and other products, targeted development of security and prevention instruments. This product is currently the most advanced and portable wireless signal and magneticfield detection equipment. It can protect our safety and secrets effectively.

MAIN FEATURE

• It has high sensitivity, wide application range and wide detection frequency.
• It can detect 2G, 3G, 4G spectrum mobile phone SIM card bug and GPS locator
• It can detect 1.2g to 5.8g wireless or wired camera equipment.
• It can detect magnetic suction positioner and bug.

FUNCTION TABLE

RF WIRELESS SIGNAL DETECTION

Firstly install the antenna and turn the knob clockwise to turn on the machine. As the Power LED and MS LED light up, RF signal detection works. When the Signal indicator reaches the 7th level, K18 will make a vibration or sound. The vibration /sound mode can be switched by short-pressing M key. The higher the Signal indicator level is, the stronger RF signal and the closer the distance to the suspicious equipment.

MAGNETIC FIELD SIGNAL DETECTION
Firstly install the GS probe and turn the knob clockwise to turn on the machine. Then long press M for 3 seconds. As GS LED lights up, magnetic detection works. You can switch between magnetic detection and RF signal detection mode by long pressing M. When the GS probe is close to the magnetic field source, the LED of the GS probe will light up, and K18 will make a vibration or sound. The vibration/sound mode can be switched by shortly pressing M. When the Signal indicator is fully on, it means it is close to the suspicious object.

CAMERA DETECTION
Short press the Laser switch to turn on/ off the LED laser lamp. Long press the Laser switch to change the flashing frequency of the LED laser lamp. Keep the environment dark, and make laser light face to the suspicious camera. Then your eyes look through the laser lens, and the position of the camera will be determined by the reflected light of camera lens.

GPS TRACKING DEVICE

The interceptor and tracker are usually placed inside the car, the bottom, front or back of the car. K18 is easy to find strong magnetic adsorption devices such as GPS locator when magnetic detection mode works and the GS probe is close to the area.

When searching for the car tracker, firstly drive the vehicle to the place where the signal is weak, and then turn off the devices with signal source, such as mobile phone, etc.

TECHNICAL SPECIFICATION

SCOPE OF APPLICATION

• Whether the car, office, or mobile phone is equipped with a wireless bug or tracking locator or wireless monitoring system.
• Check the hotel, places of entertainment, dressing room, government organs, business negotiation, school invigilation, workshop, and military-industrial facilities.
• Household appliances, such as microwave ovens and other electromagnetic radiation leakage detection.
• Whether there is a base station radiation near your working condition or living condition.

FCC Warning

Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance 20-cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>