HAOCHENG T32 Smart Band User Manual

HAOCHENG T32 Smart Band

Product Information

Specifications :

• Model: T32(ID-9324)
• Main Functions: Heart rate monitoring, step tracking, calorie tracking, blood oxygen monitoring, weather display, stopwatch, message viewing, sports tracking
• APP: GloryFit
• Compatibility: Compatible with major APP stores

Product Usage Instructions

1. Initial Setup:
   When using the smart band for the first time, follow these steps:

2. Press and hold the button to turn on the watch.

3. Scan the QR codes provided or download the GloryFit app from the major APP store.

4. Follow the on-screen instructions to set up the device.

5. Main Functions:
   The smart band offers various main functions:

   • Step/Distance/Calorie: View your daily steps, walking distance, and calories burned. Data can be synced to the GloryFit app for tracking.
   • Heart Rate Interface: Monitor your heart rate in real time. Data can be synced to the GloryFit app for analysis.
   • Blood Oxygen Interface: Check your blood oxygen levels in real time.
   • Weather Interface: Displays current weather information when connected to the GloryFit app.
   • Stopwatch: Access the stopwatch function for timing activities.
   • Message Interface: View messages on the device
   • Sports Interface: Track various sports activities like running, cycling, skipping, etc.
   • Setting Function Interface: Access settings like Find Phone, Brightness Adjustment, etc.

Frequently Asked Questions (FAQ)

• Q: How do I charge the smart band?
  A: To charge the smart band, use the provided charging contact and connect it to a power source via USB.

• Q: Can I swim with the smart band?
  A: It is recommended to avoid swimming or submerging the smart band in water to prevent damage.

Smart Band Product
User Manual

• Email: katong96120@gmail.com
• WhatsApp: +86 13242960237
• Facebook: facebook.com/Tiklands

Hello, thank you for choosing our smart band. For convenience when you using this device first time, please read the instructions carefully and follow the steps in the user manual.

Quick use instructions for smart band

Component introduction

Note : Press and hold the button to turn on the watch.

• Instruction for Charging
  Charging the device to active before the first time using; To charge your device, plug the charging cable into the adapter or USB port on your computer.

• Install bracelet
  APP Scan the following QR codes or go to the major APP store to download and install the APP “GloryFit ”

• Device requirements : iOS 10.0 and above; Android 5.0 and above

• First of all, please be sure to connect our smart watch through the “GloryFit” APP.

Main function interface

Home screen/dial On the home screen, press and hold the touch screen, swipe left and right to switch, and click OK.

• Step/distance/calorie
  View the number of steps taken at any time of the day, walking distance and calories burned, can be synchronized to the APP “GloryFit” in time to view the sports data.

• Heart rate interface
  Switch to the heart rate test interface to enter the heart rate real time monitoring, measurement data can be synchronized to the APP “GloryFit” in time, and have a test report.

• Blood oxygen interface
  Switch to the blood oxygen test interface to enter the real-time detection of blood oxygen. Test results are displayed directly on the bracelet interface.

• Weather interface
  The weather interface will display the current weather, weather information needs to be connected to the APP “GloryFit” can get data, if disconnected for a long time, weather letter information will not be updated.

• Stopwatch
  Swipe right, find the function interface, click the stopwatch icon to enter the stopwatch function.

• Message interface
  On the main interface, slide into the message interface and click the message icon to view the message. Click to turn the page to view the message or right to exit.

• Sports interface

  • Press the button on the main interface to enter the motion interface right slide back to the main interface. Click on the motion map the target can enter the motion mode detection. Running, cycling , skipping, table tennis, badminton, tennis, etc.
  • Press the button on the main interface to enter slide up and down to switch, click to start calculation, right slide to exit the current sports mode.

• Setting function interface
  In the main interface, slide down to enter the setting function interface, you can choose “Find phone”, “Brightness adjustment”, “About”, “Settings” item. Click the icon to enter the corresponding function settings.

• About interface
  Click on the “About” icon to display the machine model and the last four digits of the Bluetooth address.

• Reduction interface
  Click the “Restore” icon, you can restore the bracelet.

• Shutdown interface
  Click the shutdown page, you can shut down.

• Other function reminders
  The reminder function needs to set the reminder switch on the APP “GloryFit” side, and keep the phone and bracelet successfully connected in the Bluetooth state, and the message is a vibration reminder.

• Sleep monitoring function
  When you fall asleep, the watch will automatically determine the sleep detection mode, automatically detect your deep sleep/light sleep/wake time throughout the night, and calculate your sleep quality. Sleep data can only be viewed on the APP “GloryFit”.
  Note: Sleep data will only be available when you wear the watch to sleep.

Matters needing attention

1. lt is forbidden to use adapters with charging voltage greater than 5V and charging current greater than 2A, and the charging time is 2-3 hours.
2. lt is forbidden to charge in the case of water stains.
3. This product is an electronic product, not as a medical reference measurement data is for reference only.

Q&A

1. Why can’t push the call information or content?

2. Android QQ/WeChat reminder service access
   When the user opens the QQ and WeChat reminder switch for the first time, the APP “GloryFit” will obtain the corresponding permissions, and check the program in the APP “GloryFit” to make it obtain the corresponding permissions.

3. When iOS (call, SMS, QQ, WeChat) reminder switch, the system will automatically pop up pairing request, and users only need to select pairing.

Turn on and enter the home screen Steps for viewing E-Label:

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Fcc Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation, This equipment generates uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna
  • increase the separation between the equipment and receiver
  • connect the equipment into an outlet on a circuit different from that to which the receivers connected.
  • Consult the dealer or an experienced radio/TV technician for help This device compiles with part 15 of the FCC rules,

Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

IC Statement
This device contains licence-exempt transmitter(s)receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS(s).Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>