SuperHydro W68H H2 Master Hydrogen Water Kettle User Manual

SuperHydro W68H H2 Master Hydrogen Water Kettle

Product Structure

Package List

Instructions

First-time Use

1. Remove oil packaging, labels and accessories from inside and outside the kettle.
2. The first 2-3 times of boiling water should be poured out to clean the inside of the pot body. After the pot body is cooled down. wipe the outside of the pot body with a damp cloth. (Please note that the base and the electrical connectors on the plug should not touch the water.)

Operating Procedures

1. Open the lid. Tighten the lid handle and pull up to remove the lid.
2. Remove the cover and clean the inside of the kettle
3. Add tea, and fruit or put nothing just USS It to boll water.
4. Add an appropriate amount of water.
   • Do not odd water and tea beyond the maximum water level line or the minimum water level line
   • If the water exceeds the maximum; water line, it will cause a boiling over/low.
   • Do not add milk, soy milk, etc. it will cause problems such as overflow of paste bottom.
5. Close the lid tightly.
   • Put the LLD on the pot as shown In the picture, and press lightly to make sure the lid is tight
   • If the lid of the pot is not properly covered, it will easily fall off when pouring water.
6. lnsert the plug of the power cord into on outlet.
7. Place the electric kettle on the base and turn it on.

Interface Operation

1. Power on.
2. Standby mode.
3. Press once. (set heating temperature)
4. Rotate to adjust temperature. ( clockwise to increase temperature) (counterclockwise to decrease temperature)
5. Press once. (confirm the heating temperature, and then enter to set the holding time)
6. Press once. ( confirm the heating temperature, and then enter to set the holding time)
7. Press once. ( enter boiling water mode, and simultaneous generation of hydrogen.)
8. Reach set temperature, immediately enter the heat preservation stage
9. End of holding time, and then stop producing hydrogen.
10. Standby mode.

Hydrogen production alone without heating, is suitable for people who

like drinking cool water

1. Standby mode.
2. Press once
3. Rotate to choose H2 mode and press once, which means only producing hydrogen without heating ( for the people who like drinking cool water).
4. Now in H2 mode show 5 min and begin to produce Hydrogen, It will stop working after 5 min and you con drink Hydrogen-rich water.n

Cleaning and Maintenance

Cleaning of electric kettle

1. Unplug the power plug.

2. After the kettle has cooled, clean the inside of the kettle with a damp sponge.
   Note : Do not immerse the kettle body and its power cord or plug in water (the electrical connectors at the bottom of the kettle should not touch water).

3. Make tea or coffee, etc. After each use, please clean it in time. coated heating plate cleaning

When the coated heating plate is used for a long time, spots will appear. This is scale, which is a normal phenomenon. It can be gently scrubbed with a scouring pad. Avoid damaging the coating and avoid scratching by sharp objects.

Descaling Tips use vinegar

1. Add about 100ml vinegar to the kettle.
2. Add about 200ml of water to the electric kettle, and start boiling water ot 212°F.
3. After the program is over, let it stand for 1 hour, then wipe it off with a scouring pad.

To use citric acid:

1. Add about 200ml of water to the kettle.
2. Add lOg citric acid, start boiling water 212-F 1node.
3. Wait for 5-10 minutes after automatic power off (If there are a lot of scales, the standing time, can be extended)
4. Finally, pour out the water in the pot and wipe it with a scouring pad.

Precautions for safe use

1. Before use, check that the power supply used is consistent with the regulations of this product. The power socket used must have good grounding protection, and do not shore a power socket with high-power electrical appliances.
2. When the product is in use, do not let the power cord come into contact with sharp-edged objects, and do not get close to high-temperature objects to prevent danger or damage.
3. It is normal for the kettle body to become hot during product use. When pouring water, you can only pick up the handle to pour the water. Do not touch the kettle body with your hands to avoid high-temperature burns.
4. When using, the water in the pot should not be higher than the maximum water level line, so as to avoid the water in the pot being sprayed from the upper end of the kettle when ft boils, causing accidents.
5. The pot body must be used with the same type of power supply chassis.
6. When using, It should be placed on o stable level to work.
7. Avoid the operation or approach of children during use to avoid accidents.
8. when the work is over, please unplug the power cord and plug it in again when using it.
9. During work, if any problem occurs, please unplug the power plug from the sock.et first.
10. lf the power cord is damaged, stop using the product immediately to avoid danger.
11. Do not use other extended power cords unless it has been tested by professionals.
12. The high borosilicate gloss material is fragile, and damage is not covered by the warranty.

Note: During use, if the water boils dry, it will automatically enter the anti-dry-burning mode and stop working automatically. At this time, you need to unplug the power plug, then add an appropriate amount of cold water, and then you can use it normally after the temperature of the heating plate drops.

Hydrogen content test:
For the first time of hydrogen production, at least 5 drops of hydrogen content detection solution con be added to the certain testing container to test hydrogen; after about 15 minutes of continuous hydrogen production, 10-15 drops of hydrogen content detection solution can be added to the certain testing container to test hydrogen.

Product Specifications

This product comes into contact with food materials

Part name| Material
Heating plate| 304 stainless steel
Glass body| High borosilicate gloss
Lid| 304 stainless steel
Self-tapping screws| 304 stainless steel

use Tips
(Brewing or cooking different products at different temperatures)

• 110° F- Baby Formula
• 160°F-Delicote Teo/ Lemonade
• 175°F- Green Teo/ Yellow Teo
• 185°F-White Teo / Oatmeo
• l90°F-Oolong Tao/ Espresso
• 200°F-French Press Coffee
• 212°F-Black Tea/ instant Raman

What are the benefits of hydrogen-rich water?

1. Hydrogen-rich water can improve the taste of tao and coffee.
2. After electrolyzing, water becomes a small molecular cluster water, which can penetrate into human cells smoothly, melt high-viscosity blood lipids, accelerate cell metabolism, and promote human metabolism.
3. Hydrogen-rich water helps reduce inflammation and accelerate muscle recovery.
4. Hydrogen-rich water has anti-stress, anti-fatigue, immune enhancement, and memory improvement. facial core, sleep improvement, and other benefits that will energize you.
5. Hydrogen-rich water improves gastrointestinal problems and digestion.
6. Hydrogen-rich water boosts immunity, improves sub-health, and keeps you healthier.

There are so many benefits of hydrogen-rich water that the cord is too small to list them oil. All in all, drinking more hydrogen-rich water is great for your health!

Note : Hydrogen-rich water kettles are different from filters. The tilters can only make the water clear. Hydrogen-rich water kettles ore more effective in improving the water quality, making the water rich in hydrogen molecules and weakly alkaline, so that you can drink healthier water.

1. Remove the cover and clean the inside of the kettle.
2. Plug the power cord into an outlet.
3. Place the electric kettle on the base and press the button to turn it on.

Note : Hydrogen can be produced separately without heating, suitable for people who like to drink cool water

1. Standby mode.
2. Press once.
3. Rotate to choose H2 mode and press once, will only produce hydrogen without healing (for the people who prefer cool water)
4. This screen indicates that the hydrogen will be produced in H2 mode for 5 minutes, after which it will stop working and you will be able to drink hydrogen-rich water.

Heating mode only(eg,185’F Keeping warm 00: 00)

1. Standby mode.
2. Press to set the heating temperature.
3. Rotate to adjust the temperature to increase (counterclockwise to decrease temperature)
4. Press to confirm the heating temperature.
5. Press twice to start heating (Skip warm-up mode)
6. End of heating
7. Standby mode.
8. H2 Master hydrogen water kettle will produce hydrogen while heating. There’s no need to turn on or off the hydrogen generator.

Heating with warm-up mode (eg.170 °F Keeping warm 12:00)

1. Standby mode.
2. Press to set the heating temperature.
3. Rotate to adjust temperature.(clockwise to increase temperature) (counterclockwise to decrease temperature)
4. Press to confirm the temperature. Then press again to set the holding time.
5. Rotate to adjust holding time. (clockwise to increase holding time) (counterclockwise to decrease holding time)
6. Press to start heating.
7. End of holding time.
8. Standby mode.

Memory Mode(eg. Last setting:170°F Keeping warm 12:00)

1. Standby mode.
2. Press once.
3. Press again.
4. Press the third
5. End of holding time
6. Standby mode.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>