aevoe MOSHIQI014 Qi2 Wireless Car Charger User Guide
- August 16, 2024
- Aevoe
Table of Contents
aevoe MOSHIQI014 Qi2 Wireless Car Charger
Specifications
- Product Name: Qi2 Wireless Car Charger
- Model Number: 99MO243003
- Connector Type: Type-C
- LED Indicator: Yes
- Compatibility: Qi2 devices
Product Usage Instructions
Getting Started Device Layout:
- Remove the ball joint fastener from the wireless car charger by rotating it counterclockwise.
- Put the clip through the ball joint fastener and assemble the clip on the Qi2 Wireless Car Charger.
- Set the bracket with the proper angle to suit your car’s air vent and lock the Qi2 Wireless Car Charger on the vent.
- Connect the Type-C charging cable to the port.
- Connect the other end of the charging cable to a USB car adapter or a USB car adapter that fits into the cigarette lighter socket.
Start using Qi2 Wireless Car Charger
- The LED indicator will light up when properly supplied power.
- Long press the LED button for 2 seconds to turn on or turn off the LED lights.
LED Light Status
When connected to the power supply, the LED light indicators show different
states:
| Status | LED Light Color |
|---|---|
| Standby | White light |
| Charging | Orange light |
| Fully Charged | White light |
| FOD | Flashing orange light |
Important Notes
- FCC Caution: Compliance with FCC Rules.
- FCC Radiation Exposure Statement: Maintain a separation distance of at least 20 cm from all persons.
- CE Statement: Compliance with Directive 2013/53/EU.
Frequently Asked Questions (FAQ):
Q: How do I know if my device is fully charged?
A: The LED indicator will show a white light when your device is fully
charged.
Getting Started
Device Layout
Set up your Qi2 Wireless Car Charger
- Remove the ball joint fastener from the wireless car charger by rotating it counterclockwise
- Put the clip through the ball joint fastener and assemble the clip on the Qi2 Wireless Car Charger.
- Set the bracket with the proper angle to suit your car’s air vent and the Qi2 Wireless Car Charger can be locked on the car’s air vent, then connect the Type-C charging cable to the port.
- Connect the other charging cable end to the USB-C port of a USB car adapter, or a USB car adapter that fits into the cigarette lighter socket.
Start using Qi2 Wireless Car Charger
- The LED indicator will light up when properly supplied power.
- Long press the LED button for 2 seconds to turn on or turn off the LED lights.
LED light status
When the Qi2 magnetic wireless charging is connected to the power supply, the LED light indicators correspond to the following states.
LED Light on status
- Standby White light
Charging Orange light
- Fully Charged White light
- FOD Flashing orange light
LED Light off status
- Standby Lights off
- Charging Lights off
Fully Charged Lights off
- FOD Flashing orange light
Important Notes
When you run power-consuming applications on the mobile device or multiprocessing apps for a long time, the Qi2 Wireless Car Charger for mobile devices, the mobile device will heat up. This is a normal phenomenon and will not affect the service life or performance of the device.
-
This product is designed to work with the Moshi magnetic phone case, and we cannot guarantee that it is compatible with third-party magnet accessories.
-
The car mount can be used between 0°C-35°C and stored between -20°C-50°C.
Please avoid using it at temperatures other than those recommended. Please avoid using or storing outside the recommended temperature range to avoid causing or damaging the device. -
Prevent children or animals from chewing on the equipment; and do not disassemble, modify, or tamper with the device.
-
Do not place items with magnetic stripes. cards (e.g., credit cards, phone cards, passbooks, registration cards, etc.) near the charging device to avoid damage or destruction of the magnetic field due to the magnetic adsorption effect of the device.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co‐located for operating in conjunction with any other antenna or transmitter.
CE Statement
Herby, Aveoe Inc. declares that the radio equipment type Taita M 3 in 1 foldable wireless charging station is in compliance with Directive 2013/53/EU.