ROTWILD R.R275X Ultra Bike User Guide
- August 24, 2024
- ROTWILD
Table of Contents
ROTWILD R.R275X Ultra Bike
Instruction
You can download the Quickstart Guide on the ROTWILD website in the following languages:
Deutsch
|
Francais
|
italiano
|
Espanol
|
Nederlands
Note
The Quickstart Guide does not replace the user manual. You should always read
it in addition to this Quickstart Guide. You find the user manual on the
ROTWILD website.
You can power on your R.R275X by pushing the display button. If you hold it
down for longer than three seconds, you shut down the system.
When your system is running on low battery, you can charge your ROTWILD Bike
by connecting the delivered charging lead with the charging plug on the down
tube.
Riding Profiles
You can use your ROTWILD bike with different riding profiles. You switch through the riding profiles with a short press on the display button.
-
You will tackle flat to hilly routes with Eco. The system switches off smoothly at 20km/h.
-
Medium is suitable for mastering hilly to mountainous routes on loose surfaces.
-
High will help you climb long and steep distances
With the R.R275X you can access a special function: the Boost button. With it, you can call up the maximum performance directly at any time from any riding profile. The system switches for situational acceleration to an output of 300 watts for a maximum of 30 seconds and the driving profile points start to flash. After releasing the Boost Button, the selected riding profile takes over again.
In addition, your ROTWILD bike has an integrated front and rear light. You switch on the front light using the light button on the right handlebar end, the rear light is always on for safety reasons.
Display
The display gives you the following information:
- The horizontal bars indicate the state of charge status of your battery. One bar corresponds to 10% state of charge.
- You can read the charge status of your optional range extender from the dots. One dot corresponds to 20% state of charge of the range extender.
- In the lower display field you can display different views by double-clicking on the display button:
- BATT Battery level
- KM Remaining range
- W Current driver power and motor power
- KMH Current speed
- RPM Cadence
You can connect your ROTWILD Bike to the TQ e-bike app. Turn on your bike and
tap the “Connect” button on the app’s home screen. Enter the numbers, shown on
the display into your smartphone and confirm the connection. With the Motor
Tuning setting, you can completely adapt the motor to your needs in every
riding profile.
You can also pair your ROTWILD bike with a Bluetooth or ANT+ capably bike
computer. Select at least one sensor on your bike computer and your R.R275X is
successfully connected.
Google play Store
|
App Store
Safety
NOTE SAFETY NOTES
The safety information is a part of the user manual, which describes all relevant information. The digital user manual can be downloaded from www.rotwild.com. Users have the right to receive the user manual in paper form free of charge. If needed, the printed user manual can be ordered from us.
Reading the safety information does not exempt you from the duty to read and follow the user manual! Failure to follow the user manual can lead to dangerous riding situations, falls, accidents, and property damage. Contact your specialist dealer if you cannot carry out the described work on your bike (e.g., making adjustments) yourself, if you feel unsure, or if you do not have the proper tools.
Failure to adhere to the intended use can result in the failure of components
and materials, posing a risk of accidents and injuries:
Observe the limitations of the specified intended area of use. You can find
the assignment in Chapter 3 “Important to Know” in your user manual and on
your frame identification. Do not exceed the permissible total weight (bike +
rider + any load). You can find the permissible total weight and the weight of
your bike in Chapter 4 “Technical Data” in your user manual. Note that your
bike is designed for the regular transportation of a single person. Tampering
with the drive system, particularly tuning, is not allowed. Check your bike
for possible damage before each ride, especially the frame, fork,
handlebar/stem unit, drive unit, and seat post. Do not use your bike if any
damage is detected.
Be aware of an increased risk of injury due to potentially high temperatures
of individual components (e.g., brakes, drive unit).
Observe the guidelines for carrying objects as described in the user manual.
Follow the legal regulations applicable in your country for use on public
roads. When transporting your bike, follow the instructions in Chapter 10
“Transporting Your ROTWILD Bike,” as well as those of the authorities or the
transport company. Before each ride, check the proper functioning of the
brakes, steering, suspension, and if applicable, the lights, ensure the
handlebars, stem, wheels, mudguard, and pedals are securely fastened, and
check the tire pressure. Inspection and adjustments must be carried out
according to our guidelines in Chapter 6 “ROTWILD Details” of the user manual.
Familiarize yourself initially with the riding and braking behavior, as well as the electric assistance modes and the walk assist (if available), especially with different suspension settings, in wet conditions, and on loose surfaces. In case of damage or malfunction, your bike must be inspected by your ROTWILD specialist dealer before further use. Have your bike regularly inspected and maintained by your ROTWILD specialist dealer according to the guidelines in Appendix I “Inspection Notes” to avoid hazards, such as those caused by wear. Observe the specified torque values (Nm) for the assembly of components. Your specialist dealer will be happy to assist you with this. Use only batteries and chargers approved by us. Follow the guidelines in Chapter 6 “ROTWILD Details” for charging and using the battery, particularly regarding ambient temperature and the location of the charging process. Use only undamaged and unaltered batteries and chargers.
Customer Support
Register your new ROTWILD Bike at:
www.rotwild.com/en/service/product-
registration
WWW.ROTWILD.COM
ADP Engineering GmbH · Am Bauhof 5 · 64807 Dieburg · Germany
