JOIRIDE 324 Car Cooling Fan User Manual
- August 19, 2024
- JOIRIDE
Table of Contents
BREEZY
MODEL NO.: 324
USER MANUAL
PRODUCT SPECIFICATIONS
Material: ABS plastic
Power supply: 12 V
Power: 150W
Cable length: 1.3 m
Socket type: standard cigarette lighter
Size: 13 x 11 x 7.5 cm
Attachment: double-sided adhesive
ATTACHING THE PRODUCT:
Fix the heater unit on a desired position of the car dashboard using a double-
sided adhesive tape, and then turn on the power. The angle of the air outlet
can be adjusted: up and down by about 80 degrees and left and right by 360
degrees. You may slide the unit handle from its socket and use the unit hand-
held.
- Make sure the surface is clean before attaching
- Stick the double-sided adhesive on the dashboard surface
- Press the heater base on the adhesive
- Installation is complete, the device is ready for use.
PRODUCT FUNCTIONS:
After you have attached BREEZY securely to the surface, plug the 12V adapter
at the end of the charging cable into the adapter port (or cigarette lighter
socket). It can be turned on when plugged into the adapter port. You will find
the power switch on the handle (right side of the heating unit).
The regular model has both natural and warm air functions. The upgraded model
is equipped with a negative oxygen ion generator, which generates high-
strength negative ions upon startup, helping eliminate smoke and dust, remove
peculiar odours, cool the cabin, and purify the car’s air.
The main unit is equipped with a high-temperature resistant, versatile
electric air radiator, offering defrosting, defogging, air purification,
natural wind, and warm air functions with a simple tilt of the switch.
A – Plug into the 12V power socket of your car
- Cool wind function
- Turn OFF
- Hot wind function
WARNINGS AND SAFETY INSTRUCTIONS
- Do not alter this device in any way (either internally or externally).
- This device should not be used by children or individuals with reduced physical, sensory, or mental abilities, or individuals who do not have the necessary experience or knowledge to operate the device, unless they have received appropriate instructions or are under the supervision of a person responsible for their safety.
- The heater uses the car’s alternator for energy, features alloy heating wire for low power consumption and extended use and comes with overheating protection.
- This heater is a high-power vehicle electrical device with a relatively large working current (around 12.5A). Avoid continuous operation for extended periods (max. recommended continuous usage is 40-60 minutes). Do not use it when the engine is off to prevent draining the battery.
- If the heater shuts down abruptly after a few minutes of operation, it’s due to current protection in car’s power outlet, not a product issue. It can function normally if the protection current reaches 15A; otherwise, it won’t work with a current below 12A.
- If there is heat at the air outlet but no airflow (no fan noise) or a burning plastic smell, immediately disconnect the power supply and cease using the heater.
- The heater is a high-power electrical device. Ensure the plug is securely inserted during use to maintain a good power connection. Avoid touching the metal parts of the cigarette lighter socket when removing the plug after extended use.
- When attaching the product, refrain from obstructing the air inlet to prevent overheating and damage to the product.
- Do not place the power cord in compromising positions to avoid possible squeezing, pinching or short circuiting.
- Avoid pointing the heating unit towards fabrics, plastics, or skin at a close distance and for an extended period of time.
- Do not stick any materials into the air unlet or outlet weather the product is in use or not. Store this product in dry areas and out of reach of children.
- Please note that the heating function does not produce extremely high temperatures and is suitable for localized warming.
- Ensure your car’s cigarette lighter socket is at least 12V/12.5A/150W to prevent damage to your vehicle.
- The heater is not meant to replace the car’s air conditioning for heating the entire vehicle; it is designed to quickly defog and defrost the car’s glass.
- Do not clean this device while plugged into a power source. Do not use abrasive liquids to clean this device. Do not submerge this device in any liquid.
This label means that the product cannot be disposed of as other household
waste throughout the EU. To prevent potential damage to the environment or
human health from uncontrolled waste disposal. Recycle responsibly to promote
the sustainable use of material resources. If you want to return a used
device, use the drop-off and collection system, or contact the retailer from
whom you bought the product. The retailer can accept the product for
environmentally safe recycling.
A declaration by the manufacturer that the product complies with the
requirements of the applicable EU Directives.