MAXIM LIGHTING 86423 Culvert 15 LED Outdoor Sconce Instruction Manual

MAXIM LIGHTING 86423 Culvert 15 LED Outdoor Sconce

Product Specifications

• Item/Model Number: 86423 Culvert 15 LED Outdoor Sconce
• Lamping I Ampoule: 2xLED 7W (Included)
• Input Voltage: 120-277VAC/50-60Hz
• Output Voltage Range: 45VDCmax
• Output Current: 350mA
• Dimmer Type: Triac Dimming

Product Usage Instructions

• For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion.
• Leave a gap at the bottom to allow moisture to escape.
• This product is compatible with the following dimmers:

For more information on dimmer compatibility, visit the Maxim Lighting LED Dimmer page.

Important Notes

• This product must be installed by an experienced professional with critical knowledge of electronic lighting systems.

FAQ

• Q: Can this outdoor sconce be used indoors?
• A: It is designed for outdoor use, but it can also be used indoors if desired.
• Q: What is the recommended wattage for replacement LED bulbs?
• A: The recommended wattage is 7W LED bulbs for this sconce.
• Q: Is the mounting bracket included in the package?
• A: Yes, the mounting bracket is included for easy installation.

Item/Model Number: 86423

• Culvert 15″ LED Outdoor Sconce

LED LOW-VOLTAGE AND OUTDOOR INSTRUCTIONS

Before Getting Started

• Read the instructions carefully before assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain them for future use.
• Keep all hardware parts and packaging out of reach of children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all the required contents for complete assembly.
• Take care when lifting. Assemble the product near where you intend to install it.
• Do not over-tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep packaging materials away from children.

Lamp Care Instructions

Carefully read through the instruction sheet before assembly and using the product.
Caution there is a risk of shock!

• Disconnect from the power source before assembling or cleaning.
• Switch off, unplug, and allow the bulb to cool before replacing the bulb or cleaning.
• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Check the product cord to be sure is free torn or frayed.
• WARNING: Wires must be connected to a low-voltage driver and should not be connected directly to live wire or a short may occur.
• WET LOCATION: For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion.

Cleaning & Maintenance

• On polished finishes, often using tal powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause color to fade.

PARTS

Before getting, started, ensure the package contains the following components:

Installation Instructions

• This fixture is equipped with an LED driver, please refer to the Wiring Diagram for more details

• For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.

WIRING DIAGRAM

• DIMMER COMPATIBILITY
• MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required

ITEM/MODEL: 86423

IMPROPER WIRING and/or INCORRECT DIMMER use can cause CATASTROPHIC DAMAGE!
THIS FIXTURE MUST BE INSTALLED with a COMPATIBLE DIMMER SWITCH DO NOT CUT FACTORY-MADE CONNECTIONS.

LED DRIVER DIAGRAM

• SCHEMATIC FOR GENERAL REFERENCE ONLY

VERIFIED LIST OF TESTED DIMMERS

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Skylark CTCL-153P
• DEAKO-Smart Dimmer
• DEAKO-Simple Dimmer
• LEVITON 6672-L
• LEVITON 6674
• LEVITON DSL06

GENERAL COMPATIBILITY

• TRIAC / FORWARD PHASE
• ELV / REVERSE PHASE
• ONLY at 120VAC
• Due to inrush current, wattage should not exceed 150W on a 600W dimmer

IMPORTANT!

• If the control is not paired properly with LED fixtures, irreparable damage may occur.
• If the dimmer you are using is not listed here, consult a lighting professional or view our
• Dimming Compatibility Chart online: https://www.maximlighting.com/led-dimmer

MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required

References

• ELECTRONIC POWER TECHNOLOGY CO.,LTD.--- 纵领电子（上海）有限公司

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>