UltraLux ML124CCT LED Downlight Instruction Manual

UltraLux ML124CCT LED Downlight

DIMENSION

TECHNICAL INFORMATION

• Supply voltage: ………………………………………………………… 12 V DC
• Power: ………………………………………………………………………….. 4W
• Max. luminous flux : ……………………………….. 380 Im (light source)
• Color temperature: …………………………………. 3OOOK/4OOOK/65OOK
• Beam angle: …………………………………………………………………. 12O°
• Color rendering index : ……………………………………………….. CRl;;;:8O
• IP rate : ………………………………………………………………………… IP44
• Dimensions: ………………………………………………………. 070/18 mm
• Mounting cut : …………………………………………………….. 055-58 mm
• Working temperature: …………………………………… -1 o° C .;- +40 ° C
• Warranty: …………………………………………………………………. 2 years
• Cable lenght : ………………………………………………………………. 6O cm

INSTALLATION

DESCRIPTION

The product is an LED light source that contains two types of LED chips housed in a common casing. A switch located on the back is used to select which LEDs operate. Therefore, the user can choose from three types of light: warm (3000 K), neutral (4000 K), and cool (6500 K). The light source is equipped with a stabilizing non-dimming driver that maintains a constant intensity of emitted light within narrow boundaries, even in the event of fluctuation in the supply voltage.

IMPORTANT: READ THE INSTRUCTIONS
BEFORE INSTALLATION OR REPLACEMENT!

• Performing any actions while electric voltage is applied carries a potential risk of electric shock.
• The power supply must be disconnected before starting any work.
• The module should be connected to a power supply of a proper electrical installation, meeting the requirements of a qualified specialist.
• The module installation should be carried out by the provided diagram.
• The module may heat up during operation, so please wait for it to cool down before replacement.
• Clean with a dry cloth.
• Do not cover the module. To avoid the risk of fire, ensure free access of air to the heating elements.
• If the power cable of the module is damaged, it must be replaced by the manufacturer, its authorized representative, or a technically qualified specialist to prevent accidents and damage.
• Before turning on the luminaire, make sure that its installation has been done correctly, eliminating the risk of malfunction, and hazards to the environment, and users.
• The importer (supplier) is not responsible for damages resulting from failure to follow the above installation recommendations.

NOTE
The selection of the color temperature is done by the switch located on the back of the downlight, always with the power supply turned off.

TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS

• The product and its components are not harmful to the environment.
• Please dispose of the package elements separately in containers for the corresponding material.
• Please dispose of the broken product separately in containers for out-of-usage electrical equipment.

SCANNER

This product contains a light source of energy efficiency class E.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>