MAXIM LIGHTING 27722 Paoli 2 Light Pendant Instruction Manual
- August 16, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 27722 Paoli 2 Light Pendant
Specifications
- Item/Model Number: Paoli 2-Light Pendant 27722
- Lamping | Ampoule: 2 x E26 60W (Not included)
- General: 120V
Product Usage Instructions
- Before starting, ensure the package contains the following components:
Installation Steps
- Identify all parts from the checklist.
- Follow the provided wiring diagram for the correct installation.
- Mount component A to the designated area using screws H.
- Connect the ground wire (L) to the appropriate terminal.
- Connect the neutral wire (N) to complete the electrical connections.
- Secure components B, C, D, E, F, and G as per the assembly instructions.
FAQ
- Q: Are light bulbs included with the Paoli 2-Light Pendant?
- A: No, light bulbs are not included. You will need to purchase 2 x E26 60W bulbs separately.
- Q: Can this pendant light be installed on a sloped ceiling?
- A: Yes, the Paoli 2-Light Pendant is suitable for installation on sloped ceilings. Make sure to follow the installation instructions carefully for proper mounting.
Item/Model Number: 27722
Lamping: 2 x E26 60W（Not included)
GENERAL 120V INSTRUCTIONS
Before Getting Started
- Read the instructions carefully before assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain them for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product near where you intend to install it.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation!
Keep packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock!
- Disconnect from the power source before assembling or cleaning.
- Switch off, unplug, and allow the bulb to cool before replacing the bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
- Check the product cord to be sure is free torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
- Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause color to fade.
PARTS
- Before getting,started, ensure the package contains the following components:
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>