UltraLux Lutdhn Series Led Street Light Installation Guide
- August 16, 2024
- ULTRALUX
Table of Contents
UltraLux Lutdhn Series Led Street Light
INSTALLATION AND USING INSTRUCTION
Note: Before mounting, the power supply must be switched off by using the
main switch. Before turning ON the power, make sure the mounting of the
product has been performed appropriately.
NOTE: READ THE INSTRUCTIONS BEFORE MOUNTING!
- Performing any activity with the power supply constitutes a potential hazard of electric shock. Before mounting, the power supply must be switched off by using the main switch.
- The fixture can be installed only on a flame-resistant base with an ignition temperature of at least 200°C and does not deform or soften (e.g. metal, concrete, plaster).
- Activities related to connection to the power supply are to be commissioned to a person with appropriate authorization.
- The fixture, when properly assembled, may only be connected to a properly functioning electrical system in compliance with the applicable standards.
- Connect the fixture to the electrical supply, observing the correct polarity. (L) LIVE=BROWN; EARTH=GREN/YELLOW; (N) NEUTRAL=BLUE
- All conductors and fitting auxiliary components are to be placed at an appropriate distance from the heating parts of the fitting. When choosing the place for mounting, the required minimum distance must be kept between the fitting and the lightened objects.
- Before replacing, it is necessary to cut off the power supply by the main switch.
- Clean only with a dry cloth.
- The light fixture heats itself while working, so in case of necessity prior to undertaking its replacement, wait until it cools down.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person to avoid a hazard.
- Do not cover the fixture. To avoid any fire hazard, provide unrestricted airflow to the heated fitting parts.
- Not suitable for accent lighting.
- Before starting operating, make sure the mounting of the product has been performed appropriately, eliminating the hazard of defective operation, and not endangering the surroundings and the users.
- The importer/supplier bears no responsibility for damages resulting from failure to comply with these instructions.
ENVIRONMENT CLEANLINESS
TAKE CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
- The products and their components are not dangerous to the environment.
- Please dispose of all the package elements separately into the appropriate corresponding material containers.
- Please dispose of all broken lighting fixtures separately in containers for out-of-usage electrical equipment. Before disposing of the WEEE contact the importer/supplier or refer to the guidelines of your local environmental protection organizations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>