UltraLux SPSS555 Solar LED Projector with PIR Sensor Instruction Manual

UltraLux SPSS555 Solar LED Projector with PIR Sensor

DESCRIPTION
The LED solar floodlight is a very successful solution for façade and garden lighting. The photovoltaic panel and the rechargeable battery ensure an independent off-the-grid power supply. The floodlight has a built-in PIR movement sensor and a photocell.

TECHNICAL DETAILS

• Working mode of the floodlight              LED indicator status
• PIR sensor mode on                                             Red light on
• 4H+ PIR sensor mode                                         Red light flashing
• Time control                                                          Red light off
• Battery charging                                                   Green light flashing
• Fully charged battery                                           Green light on

LED FLOODLIGHT

·        Max. Power:

·        Max. luminous flux:

·        Night light:

·        Corelated colour temperature:

·        Colour rendering index:

·        Beam angle:

·        Dimensions:

·        IP rate:

·        Warranty:

| 5 W

800 lm max

40 lm

5500 K

Ra≥70 90°

20517044.5mm IP65

2 years

| 10 W

2000 lm max

100 lm

5500 K

Ra≥70 90°

25621144.5mm IP65

2 years

SOLAR PANEL

·        Type:

·        Dimensions:

·        Open circuit voltage:

·        Short circuit current:

·        Maximum power voltage:

·        Maximum power current:

·        Maximum power:

·        Extension cable:

|

Monocrystalline 21020017mm Voc= 6V

Isc=1.1 A

Vmpp= 5 V

Impp= 1.0 A

Pmpp= 5 W

3 m

|

Monocrystalline 30020517mm Voc= 6V

Isc=2.2 A

Vmpp= 5 V

Impp= 2.0 A

Pmpp= 10 W

3 m

BATTERY ·        Type:

·        Capacity:

·        Charging time:

·        Working time:

|

LiFePo4

3.2 V, 4000 mAh

min.4-6 h

max. 14 h (Auto mode)

max. 3 h (high bright)

|

LiFePo4

3.2 V, 12500 mAh

min. 4-6 h

max. 14 h (Auto mode)

max. 3 h (high bright)

PIR SENSOR

·        Detection distance:

·        Ambient light:

·        Detection range:

|

max. 12 m

<10 lx

120°

|

max. 12 m

<10 lx

120°

MOUNTING THE FLOODLIGHT

FUNCTIONS OF THE FLOODLIGHT (Remote control instructions)

 | Function| Effective time/ Memory| Working period| Explanation
---|---|---|---|---
ON| Turn on| Once| Day & Night| Press the ON button to turn the solar floodlight on. It turns on at 30% brightness and gradually dims throughout the night.

OFF

| Turn off| Once| Day & Night| Single button press to turn off the floodlight.
Turn off| Daily/Memory| Day & Night| Press and hold the OFF button for 3 seconds. The floodlight will turn off until it is turned on from the ON button, but it will be able to be charged by the solar panel.
☀| Night light| Once| Day & Night| When the button is pressed while the floodlight is on, it lights up at 45% brightness and turns off after 3 hours.
| PIR sensor mode| Once/Memory| Night| When the sensor detects movement in the range, it will automatically turn on the lighting at 100% brightness. After the glow time has expired, it will turn on the lighting in night light mode – 5%.
3H| 3- hour timer| Daily/Memory| Night| 45% brightness, smoothly decreasing. After 3 hours it will turn off.

4H+

| 4-hour timer+ PIR sensor mode| Daily/Memory| Night| 30% brightness, smoothly decreasing. After 4 hours, it switches to sensor mode with night light – when the sensor detects movement in the operating range, it will automatically turn on the lighting at 100% brightness. After the glow time has expired, it will turn on the lighting in night light mode – 5%.
6H| 6-hour timer| Daily/Memory| Night| 35% brightness, smoothly decreasing. After 6 hours it turns off.
AUTO| 12- hour timer| Daily/Memory| Night| 30% brightness, smoothly decreasing. It turns off after 12

hours.

NOTE

• The lamp has a photovoltaic supply panel. The solar panel should face a Sough direction and be tilted 30 to 45 deg. Consider mounting it in places with enough sunlight to charge the battery (8-10 hours direct light).
• The remote control has a range of 10 m max and must be pointed at the floodlight directly.
• The lamp contains a Li-FePo4 rechargeable battery. Do not attempt to repair or replace it!
• The fixture can be installed only on a flame-resistant base with ignition temperature at least 200 °C and does not deform or soften (e.g. metal, concrete, plaster).
• Clean only with dry cloth.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person to avoid a hazard.
• Not suitable for accent lighting.
• Prior to starting operating, make sure the mounting of the product has been performed appropriately, eliminating the hazard of defective operation, not endangering the surrounding and the users.
• The importer/supplier bears no responsibility for damages resulting from failure to comply with these instructions.

TAKE CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
The products and their components are not dangerous for the environment.
Please dispose all the package elements separately into the appropriate corresponding material containers.
Please dispose all broken lighting fixtures separately in containers for out of usage electrical equipment. Before disposing the WEE contact, the importer/supplier or refer to the guidelines of our local environment protection organizations.

www.ultralux.bg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>