JENSEN JDASHCP 7 Inch Dash Mount Touchscreen Monitor User Guide

JENSEN JDASHCP 7 Inch Dash Mount Touchscreen Monitor

Product Information

Specifications:

• Designed and Engineered in the USA
• Compatible With AndroidTM Phones
• 12V Power Adapter with USB port for charging (2.1A)
• 3.5mm AUX output for sending audio to car stereo
• FM Transmitter functionality
• External Microphone for improved voice quality
• Bluetooth connectivity for hands-free calls and audio streaming

Product Usage Instructions

• Main Menu Navigation:
  In the main menu, press the desired icon to enter the corresponding mode such as FM Transmitter, Android, Apple, BT Phone, BT Music, USB, Device, or Settings.

• Audio Operation:
  Adjust the Balance and Equalizer controls by pressing the Settings icon on the main menu screen. Customize with 16-Band Tone Control and 8 Presets EQ Settings.

• USB Operation:
  Access USB playback by touching the USB icon on the main screen from the main menu.

Bluetooth Operation:

• Pairing a New Device:
  The unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. The device’s name is JDASHCP. Pairing may need to be done more than once on certain phones.

• Connecting a Device:
  The head unit will automatically connect to the last paired device if Auto Connect is set to On. If set to Off, a manual connection is required.

• Bluetooth Phone:
  Access Bluetooth settings from the main menu screen. Dial numbers, make/end calls, and transfer audio between the head unit and mobile phone.

• Streaming Audio:
  Enjoy streaming audio capabilities through Bluetooth connectivity.

Frequently Asked Questions (FAQ):

• Q: How do I improve map accuracy with the GPS antenna?
  A: Use the GPS antenna provided in the package to enhance map accuracy.

• Q: How do I connect my phone to the wireless Apple and Android device?
  A: Disable the Bluetooth connection between your phone and the vehicle’s head unit. Pair your device with JDASHCP by following the pairing instructions in the manual.

Dash Mount 7″ Touchscreen Monitor with Wireless Apple® and Android™

This Quick Start Guide gives you the basics to start using your JDASHCP. Please visit https://www.jensenmobile.com. to download a complete owner’s manual or call customer service at 1-888-921-4088 (Monday-Friday, 9 AM-5 PM EST).

Wiring Diagram

Wiring Diagram – Inputs/Outputs

Installation

Before You Start
Avoid installing the unit where it would be subject to high temperatures from direct sunlight, dust, dirt, or excessive vibration.

Control Locations

The radio display features the following functions and displays:

1. Power/mute
2. Dimmer
3. Voice activation button
4. Internal microphone

Main Menu

In the main menu, press the desired icon to enter the corresponding mode: FM Transmitter/Android/Apple/BT Phone/BT Music/USB/Device/Settings.

FM Transmitter

1. Main Menu
2. Current Mode Indicator
3. Seek Tune-Up
4. Seek Tune Down
5. Preset Stations
6. FM Transmitter On/Off
7. Keypad

Operation

Audio Operation
Press the “Settings” icon on the main menu screen to adjust the Balance and Equalizer controls (16-Band Tone Control and 8 Presets EQ Settings).

USB Operation
From the main menu, touch the USB icon on the main screen.

1. Main Menu
2. Current Mode Indicator
3. EQ
4. List
5. Random
6. Track Up
7. Play/Pause
8. Track Down
9. Repeat

Bluetooth Operation

• Before using Bluetooth

  • Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenticated.
  • This is also referred to as “pairing” a device.
    [Note]
    To connect wireless Apple and Android devices after installing the On-Dash product in your vehicle, you must disable the Bluetooth connection between your phone and the existing vehicle’s head unit. Additionally, the phone you want to connect to a wireless Apple and Android device must not be connected to any other devices via Bluetooth.

• Pairing a New Device
  The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “JDASHCP”. The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once.

• Connect
  The head unit will automatically connect to the last connected device when the connect feature is set to Auto connect On. If the connect feature is set to Auto Connect Off, the head unit will not automatically connect to any device.

• Bluetooth Phone
  From the main menu. touch the Bluetooth on the screen. Bluetooth icon will appear anytime a Bluetooth device is connected.

• Dialing a Number
  Press to display the keypad and dial a number.

• Making and Ending a Call
  Press to connect a call, and press to end a call.

• Transferring Audio
  Press to transfer audio between the head unit and mobile phone.

• Streaming Audio

  • Press to play or pause the music.
  • Press to skip to the previous track.
  • Press to advance to the next track.

Wired & Wireless Apple Operation

Wired connection

1. Connect an Apple-compatible device to this unit via USB.
2. Press the Apple icon.
   The Apple home screen appears.

Wireless connection
Before using Apple wirelessly, turn on the Bluetooth/Wifi function on the Phone.

1. Press the icon on the main menu;
2. Press “ ” to confirm to use of wireless Apple;
3. Press the” ”icon to search the phone device. The available devices appear on the list;
4. Find the desired device on the screen and press “Pair”;
5. A pass key will be displayed on the screen;
6. The same key appears on the phone, press “Pair” and then press “Allow” for the popups;
7. Press “ ” on the screen to confirm to connect;
8. Press “Use CarPlay” on the phone. The unit configures the connection and then starts the application.

Tip:
Press the” ” icon. Displays Apple device list. This icon appears Only When Apple is connected and two or more devices can be used as Apple Source.

Wired & Wireless Android Operation

Wired connection

1. Connect an Android-compatible device to this unit via USB.
2. Press the Android icon. The Android home screen appears.

Wireless connection
Before using Android wirelessly, turn on the Bluetooth/Wifi function on the Android device.

1. Press the icon on the main menu;
2. Press “ ” to confirm to use of wireless Android;
3. Press the” ”icon to search the phone device. The available devices appear on the list;
4. Find the desired device on the screen and press “Pair”;
5. A pass key will be displayed on the screen;
6. The same key appears on the Android device, press “Pair” and then press “Allow” for the popups;
7. Press “ ” on the screen to confirm to connect;
   The unit configures the connection and then starts the application.

Tip:
Press the” ” icon. Displays Android device list. This icon appears Only When Android is connected and two or more devices can be used as Android Source.

General Operation
From the Main Menu screen, select Setup to access the Settings menu and select from categories represented by the icons on the bottom of the screen: General, Audio, Display, and Others. Select the category, and adjust any of the available options using the touch screen.

Limited Two Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

Jensen warrants this product to the original purchaser to be free from defects in material and workmanship for two years from the date of the original purchase. Jensen agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equally new, renewed, or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.

What is covered?
This warranty covers all defects in the material and workmanship of this product.

The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair, or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found at www.jensenmobile.com.

Warranty Coverage

• Limited 2-year warranty. (Proof of purchase required)
• Extend your warranty from 2 years to 3 years when you register online at www.jensenmobile.com.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
4. For more information and the location of the nearest authorized service center please contact us by one of the following methods:
   • Call us toll-free at 888-921-4088 (Monday-Friday, 9:00 am, to 5:00 pm, EST)
   • E-mail us at cs@jensenmobile.com.

Exclusion of Certain Damages: This warranty is exclusive and instead of any other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim, or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

www.jensenmobile.com

©2024 Namsung America Inc. All rights reserved.

References

• Car Stereo - Jensen Mobile
• Car Stereo - Jensen Mobile

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>