SANUS WSSE1A1 Height Adjustable Speaker Stand Instruction Manual

SANUS WSSE1A1 Height Adjustable Speaker Stand

Product Specifications

• Model : WSSE1A1 / WSSE1A2
• Product: Height-Adjustable Speaker Stand
• Weight Limit: 5 lbs. (2.2 kg)
• Tool Needed: Screwdriver

FAQ

• Q: What is the weight limit for the speakers on this stand?
• A : The weight limit is 5 lbs. (2.2kg). Do not exceed this limit to avoid damage.
• Q: Do I need any special tools for assembly?
• A : Yes, you will need a screwdriver to assemble the speaker stand.
• Q : Can I use both insulation pads and carpet spikes together?
• A: Yes, you can choose to use either rubber insulation pads or optional carpet spikes based on your preference.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE MANUAL BEFORE USE — SAVE THESE INSTRUCTIONS

Before getting started, let’s make sure this product is perfect for you! This stand is designed to support only Sonos® Era 100™ speakers.

CAUTION: Avoid potential personal injuries and property damage!

• Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
• Please read through these instructions completely to be sure you’re comfortable with this easy install process.
• Do not use this product for any purpose not explicitly specified by the manufacturer.
• The manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• If you do not understand these instructions or have doubts about the safety of the installation, assembly, or use of this product,

Dimensions

Parts and Hardware

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

NOTE : Not all hardware included will be used.

The quantities shown are for one speaker stand.

ASSEMBLY INSTRUCTION

• STEP 1
  Route Cable(s)

• STEP 2
  Attach Base to Pillar

• STEP 3
  Install Isolation Pads -or- Carpet Spikes
  WARNING: The ends of carpet spikes 06 are sharp and may scratch flooring, damaged wiring, or be hazardous to children

• STEP 4
  Attach Top Bracket

• STEP 5
  Install Speaker Bracket

• STEP 6
  Install Speaker

• STEP 7
  Height Adjustment

• STEP 8
  Secure Cables

Thank you for choosing SANUS! Please take a moment to let us know how we did:

Legrand AV Inc. and its a±iliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand AV makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Legrand AV makes no representation of warranty, expressed or implied, regarding the information contained herein. Legrand AV assumes no responsibility for the accuracy, completeness or su±iciency of the information contained in this document.

CONTACT

• Legrand AV Inc.
• 6436 City West Parkway
• Eden Prairie, MN 55344 USA
• US: +1 800-359-5520

Legrand AV Netherlands B.V.

• Franklinstraat 14 6003 DK Weert Netherlands
• UK: +44 (0) 800 056 2853
• EMEA: +31 (0) 495 580 852

Authorized Representative for the UK

• Starline Holding Technology Ltd.
• Unit C Island Road
• Reading RG2 0RP UK

©2024 Legrand AV Inc. All rights reserved. SANUS is a brand of Legrand. SANUS and the SANUS logo are registered trademarks of Legrand.
Sonos and Sonos product names are trademarks or registered trademarks of Sonos, Inc. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>