FlyFans Saab JAS-39 GRIPEN Jet Instructions
- August 15, 2024
- FLYFANS
Table of Contents
FlyFans Saab JAS-39 GRIPEN Jet
Product Specifications
- Dimensions: 570 mm x 880 mm
- Weight: 220-250g
- Battery Type: Li-pol 3s
Product Usage Instructions
Gluing Steps
Use Medium CA glue followed by activator in the following sequence:
- Medium CA
- Activator
- Medium CA
- Activator
- Medium CA Activator
- Thin CA Activator for Carbon 3×0.5×500
- Thin CA Activator for Carbon 3×0.5×250
- Medium CA for Servo center
- Activator for Servo center
- Medium CA and Activator for L+R parts
- Thin CA for Carbon 1.5 x 100mm, cut 90mm, and L+R parts
- Sandpaper for finishing
- Sandpaper for finishing (90mm)
- No Glue required
- Medium CA and Activator for L+R parts
- Medium CA and Activator for L+R parts
- Medium CA and Activator for L+R parts
Electronics Installation
- Install ESC 15A, 2204/2200kv motor, and ensure the CG is at 400mm.
FAQ
- Q: What type of battery does this product use?
- A: This product uses a Li-pol 3s battery.
- Q: What are the dimensions of the product?
- A: The product dimensions are 570 mm x 880 mm.
- Q: How should I glue the carbon parts?
- A: For carbon parts, use Thin CA glue and activator as specified in the instructions.
Features
Installation Instructions
- We wish you many happy flights.
- RC Factory team
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>