LSTN Sound

LSTN Sound Wembley Earbuds in Walnut Wood with in-Line Microphone and

Volume Control

Specifications

• BRAND: LSTN Sound
• COLOR: Brown
• FORM FACTOR: In Ear
• CONNECTIVITY TECHNOLOGY: Wired
• SPECIAL FEATURE: Volume-control, Microphone
• PACKAGE DIMENSIONS: 5 x 5 x 1.3 inches
• ITEM WEIGHT: 4.8 ounces

Introduction

These earbuds are not your typical ones. They are Luxurious hi-fi audio combines with functionality and mobility. They have Authentic walnut housing controls and a built-in mic. They contain rubber cable that is noiseless. They come with golden details fiber-based travel bag

HOW MICROPHONE WORKS

You can speak into your earphones to record audio since microphones and earphones use vibrating diaphragms to transform sound into electrical impulses and back again.

HOW TO USE IN-LINE MIC

• Select the “Sound” section under the “System” heading in Settings.
• Choose “Choose your input device” under the “Input” section, then pick the microphone or recording device you want to use.
• Speak into your microphone to check it out.

HOW TO MAKE EARBUDS LAST LONGER

• After each use, wipe.
• Do not allow anyone else to use your headphones.
• Brush any earwax or dirt off the driver unit gently.
• Don’t forget to bring the jack.
• Don’t put them in your pocket right away.
• Avoid dangling the wires.
• Keep your wiring neat and organized.
• Avoid wrapping your cables tightly in loops.

How To Protect

• Pull The Plug, Not The Cable. Coil The Cable Carefully. Don’t Let The Cord Dangle. Don’t Keep Them Plugged In.
• Make Your Wired Earphones Strong (And Beautiful), Get A Carry Case, and Don’t Sleep With Them On.

HOW VOLUME CONTROL WORKS

A variable resistor is used in the volume control. When you turn it in a certain way, the resistance to electrical signals rises and falls. As you lower the level, the resistance rises, enabling fewer voltages to reach the speaker. The speaker becomes quieter as the voltages are decreased.

HOW TO CONTROL VOLUME

By pressing + or -, you can change the volume. Turn on the power while pressing the minus (-) side of the volume/brightness slider to start the system with low or muted sound.

HOW TO FIX AUDIO PROBLEMS

• Check the output of your speakers.
• Activate the audio troubleshooter.
• Check to see if all Windows updates have been installed.
• Check your speaker, headphone, volume controls, wires, connectors, and jacks.
• Check sound settings. …
• Update your audio drivers.
• Set the default device to your audio device.

Frequently Asked Questions

Why is the volume on my earbuds so low?

You may adjust the volume on your Android device by pressing the “volume up” and “volume down” buttons until it is loud enough for you to comfortably hear. Go to Settings > Sound & vibration if it doesn’t work or if you want to access your settings and change other audio settings.

How durable are wired earbuds?

If you buy something for $10 and use it about every day for six months, you might find that the wire frays or one of the earbuds quits working. Wired earphones, on the other hand, can last up to five years if you spend more than $50 on them and take good care of them.

In-line volume control: what is it?

School The most popular headsets have inline speaker volume controls, which allow users to instantly change their speaker level as needed with a simple dial or slide switch.

Inline microphone: What does that mean?

When you wear a headset, your mouth will be close to the inline microphone, which is a microphone that is incorporated into the cable. If you use gadgets like your smartphone while wearing headphones or earbuds, this capability is excellent for you.

Why do earphones malfunction?

The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.

Why do people use earbuds?

Earbuds let in more background noise since they lie on the outside of your ear canal. Depending on your lifestyle, this can be a plus. Earbuds make it possible for you to be more aware of your surroundings when you commute downtown and move around the streets.

What is the purpose of line in?

The audio jack of an audio device known as “line in” is used to connect to a microphone or other audio output device. Line in could be analogue or digital. The line-in jack’s primary use is to facilitate audio recording or to modify incoming sounds.

The wired earphones’ mic is located where?

The majority of our wired headphones (including those with microphones) have a 3.5mm jack connection known as a “TRRS” connector. The Mic Input is located at the bottom of the jack, if you’ll notice.

What distinguishes a mic in from a line in?

A line-in is an input designed to handle line level intensity, whereas a mic- in is designed to handle mic-level intensity (from a microphone). Because of this, when you connect your microphone to a line-level input, there is no audible signal. So, if you want to make things simpler, you may think of signal level as “volume.”

How do in-line controls work?

With in-line controls, you can manage your music without taking off your headphones. You can control your device because the controls are integrated within the wire. Check out the top-ranked list of headphones with inbuilt controls, reviews, and ratings below.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>