MAXIM LIGHTING 10117SW Habit Outdoor Wall Sconce Installation Guide
- August 15, 2024
- MAXIM LIGHTING
Table of Contents
MAXIM LIGHTING 10117SW Habit Outdoor Wall Sconce
Product Information
Specifications
- Item/Model Number: 10117SW Habit Outdoor Wall Sconce
Product Usage Instructions
Assembly Steps
- Identify the components: Fixture, Mounting Bracket, Silicon Washer, Screws #8-32, Screws #8/32-0.5, Wire Nuts.
- Attach the Mounting Bracket (B) to the Fixture (A) using the provided screws (G).
- Secure the Silicon Washer (SHD10117SWBK) between the Fixture and the Mounting Bracket to prevent water intrusion.
- Connect the wires using the Wire Nuts (D).
Installation
- For outdoor use, caulk around the fixture with silicone sealant to prevent water intrusion.
- Ensure there is a gap at the bottom of the fixture to allow moisture to escape.
FAQ
Q: Can I use a higher wattage bulb than 60W?
A: It is recommended to use a maximum of 60W LED bulb to prevent overheating
and ensure product longevity.
Item/Model Number:_ 10117SW Habit Outdoor Wall Sconce
OUTDOOR INSTRUCTIONS
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain for future use.
- Keep all hardware parts and packaging out of reach of children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. compe that sem have all required contents for Take care when lifting. Assemble the product in close proximity to where you intend to install it.
- Do not over tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product. Risk of suffocation! Keep packaging materials away from children.
Lamp Care Instructions
-
Carefully read through the instruction sheet before assembly and using the product. C
aution there is a risk of shock! Disconnect from power source before assembling or cleaning. -
Switch off, unplug and allow bulb to cool before replacing bulb or cleaning- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
-
Check the product cord to be sure is free torn or frayed.
-
WET LOCATION: For outdoor use, caulk around EXTERIOR A L’EXTERILUR fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.
Cleaning & Maintenance
- On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
- Clean with soft cloth and a mild detergent. Do not use abrasive or harsh cleaners. Periodically (every 90-180 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, meltingand scorching, or even cause color to fade.
PARTS
Before getting,started, ensure the package contains the following components:
For outdoor use, caulk around fixture with silicone sealant to prevent water intrusion. Leave a gap at the bottom to allow moisture to escape.