QUOIZEL LIGHTING 611728378502 Ainsley Semi Flush Mount Light User Guide
- June 17, 2024
- QUOIZEL LIGHTING
Table of Contents
611728378502 Ainsley Semi Flush Mount Light
ITEM # 5644950
MODEL # LWS8063C3
USE AND CARE GUIDE
1-LIGHT SEMI-FLUSH MOUNT
Thank you for purchasing this QUOIZEL product.
If you have any questions or problems, please call our customer service
department, 8:30 a.m. – 5:00 p.m., EST, Monday – Thursday, 10:20 a.m. – 5:00
p.m., EST, Friday.
For the quickest response, please visit Quoizel.com and
click on Contact Us.
1-844-564-3055
E-mail:[email protected]
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
LIGHT SOURCE
1 BULB REQUIRED (SOLD SEPARATELY)
*Please check with bulb manufacturer for dimming capabilities.
|
---|---
BULB BASE TYPE| BULB SHAPE
BULB COMPARISON
TOOLS
REQUIRED
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY | Stock Part# |
|---|---|---|---|
| A | Crossbar Assembly | 1 pc | 914974KIT |
| B | Wire Connector | 3pcs | |
| C | Outlet Box Screw | 2pcs | |
| D | Fixture | 1pc | N/A |
| E | Ring Assembly A | 1 pc | |
| F | Ring Assembly B | 1pc | |
| G | Stem Assembly | 3pcs |
C
– If the ceiling canopy is not snug against the ceiling, remove it from the
crossbar assembly. Adjust the length of the pre-assembled mounting screws by
unscrewing the pre-assembled hex nut. Screw the mounting screws in or out of
the crossbar until the correct length is achieved. Then, re-attach the ceiling
canopy.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM
Bulbs will not light.
Fuse blows or the circuit breaker trips when light is turned on.
POSSIBLE CAUSE
- Bulb is burned out.
- Power is off.
- Faulty wire connection.
- Faulty switch.
Crossed wires or power wire is grounding out.
CORRECTIVE
- Replace light bulb.
- Make sure power supply is on.
- Check wiring.
- Test or replace the switch.
Check wire connection.
MADE IN CHINA
Documents / Resources
|
QUOIZEL LIGHTING 611728378502 Ainsley Semi Flush Mount
Light
[pdf] User Guide
611728378502 Ainsley Semi Flush Mount Light, 611728378502, Ainsley Semi Flush
Mount Light, Semi Flush Mount Light, Flush Mount Light, Mount Light, Light
---|---