BENELEC 01104C6K1 6 dBi Vehicle Booster Pack User Guide
- August 14, 2024
- BENELEC
Table of Contents
Innovation Radio Technology
INFORMATION GUIDE
6 dBi Vehicle Booster Pack
Amplified Cellular Coverage
SKU: 01104C6K1
AR3400
01104C6K1 6 dBi Vehicle Booster Pack
- PACK INCLUDES
- CEL-FI ROAM R41
- 6 dBi External 5G Antenna
- Internal Antenna
- Vehicle Power Adaptor
- Mounting Brackets
DATASHEET CEL-FI ROAM R41
Mobile Cellular Coverage Solution
The CEL-FI ROAM R41 mobile cellular coverage solution delivers reliable 3G,
4G, and 5G connectivity inside cars and boats, including fleet vehicles. With
the latest Nextivity proprietary IntelliBoost chip, ROAM R41 offers
enterprise-grade performance to solve poor coverage and enable dependable
calling, texting, and streaming on the move. The system features plug-and-play
operation for quick and easy set up, improving connectivity in any car, truck,
RV, or boat within minutes. ROAM R41 also supports carrier switching through
the Nextivity WAVE App for iOS and Android devices.
FEATURES
- Suitable for Telstra / Optus / Vodafone
- Deploy the unit anywhere in the network, with full frequency coverage
- Latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelized coverage for specific mobile network operator signals
- Support for 3G, 4G, and 5G dynamic spectrum sharing (DSS)
- Easy to install with plug-and-play operation
PART NO: 01104C06
SPECIFICATIONS
| Frequency Bands | 1/3/5/7/8/20/26/28L |
|---|---|
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator | PLMN-IDs |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
BANDS
| Frequency Bands | Downlink (MHz) | Uplink (MHz) | Max. Relay BW (MHz) |
|---|---|---|---|
| 1 | 2110-2170 | 1920-1980 | |
| 3 | 1805-1880 | 1710-1785 | 20 |
| 5 | 869-894 | 824-849 | |
| 8 | 925-960 | 2500-2570 | |
| 7 | 2620-2690 | 880-915 | 15 |
| 20 | 791-821 | 832-862 | |
| 26 | 859-894 | 814-849 | 20 |
| 28L | 758-788 | 703-733 |
INTERFACE
| Donor RF Connector | SMA (f) |
|---|---|
| Server RF Connector | SMA (f) |
| DC Input | 5.5 x 2.5 mm (f) Barrel |
| Device Setup | Bluetooth for WAVE App |
| Power & System Status | Bi-color LED (Green/Red) |
| Factory Debug only | USB 2.0 Micro-B |
| System Management & SW Updates | WAVE App for iOS 11.0 or later |
WAVE App for Android
Band Selection| MyWAVE App for iOS 11.0 or later
MyWave App for Android
POWER SUPPLY
| Power Consumption (W) | 18 |
|---|---|
| max. Input Voltage (VDC) | 11.5 to 15 |
| Input Current (A max.) | 1.5 |
| Power Supply Plug | Automobile Auxiliary Power |
| Power Supply Cable | 18 AWG |
| Power Supply Cable Length | 5m |
COMPLIANCE
3GPP| TS 25.143 Rel 13
3GPP TS 36.143 Rel 13
---|---
CE| Compliant
RED 2014/53/EU
RoHS3| EN 63000: 2018
ACMA/RCM| AS/NZS CISPR, 32:2013
Bluetooth| LE Ver 4.2
ENVIRONMENTAL
| Operating Temperature | 0 to 60 °C |
|---|---|
| Storage Temperature | -35 to 70 °C |
| Heat Dissipation | Passive Convection |
| Surface Temperature max. at ambient | 44 °C |
| Non-condensing Humidity | 0 to 95% |
| Ingress Protection Rating | IPX0 |
CEL-FI ROAM R41 MAIN UNIT OUTLINE
DATASHEET EXTERNAL ANTENNA
DATASHEET
Multi-Band Mobile 5G 6dBi Removable Cellular Antenna PART NO: 024575R
The 024575R antenna is a multi-band mobile 5G ready removable cellular antenna
intended for use in the frequency bands 690 – 960 MHz, 1710 – 2700 MHz and
3500 – 3700 MHz. The antenna is light weight, enclosed in a thick-walled
fiberglass radom and comes with a removable cable spring assembly.
APPLICATIONS
- Mobile and cellular communications
- Cellular Repeaters
- Multi-band base station
TUNING
Factory tuned; no further tuning required.
FEATURES
- Multi-Band performance
- Removable antenna
- Easy to install
- Fiberglass and thick-walled radom
- Light weight
- Plated heavy duty barrel stainless steel spring
- Designed and manufactured in Australia
OPTIONAL MOUNTINGS
02726S Gutter Grip All Stainless-Steel Construction
02728 Mirror Bracket Stainless Steel
027291 Stainless Steel “L” Bracket
02730 Right-Angle Stainless-Steel Bull Bar Bracket
027303 Adjustable Tilt Lip Mount
02732 Extra H/Duty Stainless Steel Bull Bar Bracket02734 Stainless Steel “Z”
Bracket
02714S Slope-Adjustable Gutter Grip
027313 45mm Bull Bar Bracket Wrap Around
027314 50mm Bull Bar Bracket Wrap Around
027315 63mm Bull Bar Bracket Wrap Around
027316 76mm Bull Bar Bracket Wrap Around
027423 Mag Base Kit Super Sucker
RADIATION PATTERNS
SPECIFICATIONS
Frequency| 690 – 960 MHz Tuned Bandwidth 270 MHz
1710 – 2700 MHz Tuned Bandwidth 990 MHz
3500 – 3700 MHz Tuned Bandwidth 200 MHz
---|---
Gain| 6 dBi (690 – 960 MHz), 3 dBi (1710 – 2700 MHz)
3 dBi (3500 – 3700 MHz)
Impedance| 50 Ohm
VSWR| < 2:1
Radiation Pattern| Omni-directional
E Plane 3dB Beamwidth| 20 deg
Length| 905 mm (includes spring assembly)
Width| Fiberglass: 16 mm (0.6”)
Spring: 35 mm (1.4”)
Weight| 0.81 kg (1.79 lbs)
Termination| SMA Plug, 5 m (16’) RG58 Cable Tail (05603)
Construction| Fiberglass Radom, Black Coated Stainless-Steel Spring and Brass
Ferrule
DATASHEET MOUNTING BRACKETS
DATASHEET
Bull Bar Bracket
Heavy Duty Polished Stainless Steel
Suitable for Medium Weight Antennas
APPLICATIONS
- Bull Bar / Nudge Bar 40 – 60 mm Diameter
- Can accommodate any 16 mm stud mount antenna, standard base and all M base fittings
- Can be mounted horizontally or vertically on bar
- For bigger bars, replace hose clamps
SPECIFICATIONS
| Antenna Mounting | 16 mm |
|---|---|
| Materials | Electropolished Stainless Steel |
| Hose Clamps | Stainless Steel 40 – 60 mm |
| Dimensions | 55 x 40 x 45 mm (LxWxH) |
PART NO: 02732
DATASHEET
Guard Mount
Stainless Steel
Suitable for Medium Weight Antennas
APPLICATIONS
- Vehicle Boot / Bonnet Mounting
- Fixed Installation of GPI Antennas
- Can accommodate standard bases
SPECIFICATIONS
Mounting Holes| 4 x 4.6 φ, 38 mm, 1 x 11 x 15 mm
slot vertical and 1 x 11 x 12 mm
slot horizontal
---|---
Antenna Mounting| 16 mm φ
Materials| Nom 2 mm Polished Stainless Steel
Back Plate| 52 mm (W) x 57 mm (H)
Antenna Centre to Back| 26.5 mm
Cable Entry| 5.5 mm slot
Dimensions| 50 x 55 x 60 mm (LxWxH)
PART NO: 02734
INSTALLATION GUIDE
ROAM R41
Quick Start Guide
Included In the Box
KIT#:
R41-9B-001
R41-9B-002
R41-9B-003
R41-YB-001
R41-YB-002
R41-YB-003
| R41-YB | 1/3/5/7/8/26/28L | Downlink | 0 |
|---|---|---|---|
| Uplink | 22 | ||
| R41-9B | 1/3/7/8/20 | Downlink | 0 |
| Uplink | 22 |
Power/Status LED Indicator
LED Behavior| Translation/Error State
No light| Device is powered OFF
Solid Orange| Device is powered ON
–| Device is booting up
Slow blinking green| Device is band scanning to acquire network signals
Solid Green| Device is operating normally and providing coverage
Solid Red| Hardware Error (ES1)–Disconnect & Reconnect
Flash RED 1 time & OFF for 4sec| Device is not receiving signal from the
cellular network (ES2)
Flash RED 2 times & OFF for 4sec| Donor input signal is too strong for the
device (ES4)
Flash RED 3 times & OFF for 4sec| Device’s server antenna is too close to
donor antenna (ES7)
Flash RED 4 times & OFF for 4sec| Device is disabled by the operator (ES9)
Flash RED 5 times & OFF for 4sec| Device location lock pending (ES10)
Flash RED 6 times & OFF for 4sec| Device registration pending (ES11)
Flash RED 7 times & OFF for 4sec| Device Self-Test Failed (ES12)
Nextivity WAVE Software
Download the WAVE App
to monitor and manage the
status of your ROAM R41.
Scan to Download
https://apps.apple.com/us/app/cel-fi-wave/id980050278?ls=1
https://play.google.com/store/apps/details?id=com.NxtyWave&hl=en
Download the MyWave App to set your ROAM R41 to automatically track the base station to which your phone is connected. +Scan to Download
https://apps.apple.com/us/app/cel-fi-mywave/id1560705133
https://play.google.com/store/apps/details?id=com.nextivityinc.MyWave
Quick Installation
IMPORTANT: Your CEL-FI GO G41 is electronic equipment. The CEL-FI GO
G41 must be kept indoors and in a dry, cool, well ventilated area.
-
Install Donor Antenna Mount your Donor Antenna on the exterior and towards the rear of your automobile or boat, depending on the design and type of vehicle. Make sure you consider the cable connection to the Main Unit with your location choice.
Note: For best performance, ensure there is 50 cm of metal around the base of the antenna. -
Install the Server Antenna Install the Server Antenna in the cabin/deck towards the front of the vehicle where coverage is needed. Make sure to mount the Server Antenna horizontally.
Note: The Donor Antenna should be separated/isolated as far away as possible from the Server Antenna, greater separation provides the best performance. -
Select the Main Unit Location Find a suitable location to securely mount the Main Unit. When installed, the Main Unit should have airflow and be in a position that doesn’t contact other objects. Make sure the location provides enough distance for all the cables to connect.
It’s best to ensure all cables reach desired locations BEFORE mounting the device. -
Attach Server and Donor Antennas Attach the Donor Antenna and Server Antenna to the Main Unit.
Note: Adding a drip loop to the Donor Antenna cable is crucial as it prevents water from flowing down the cable and damaging the Main Unit’s electronic equipment. -
Install Ground Cable Using the provided M3 screw, attach one end of the ground cable to the Main Unit and the other end to the chassis of the automobile or boat.
-
Plug in the Main Unit Using the provided M3 screw, attach one end of the ground cable to the Main Unit and the other end to the chassis of the automobile or boat.
FAQs
Frequently Asked Questions
What is CEL-FI ROAM R41?
The CEL-FI ROAM R41 is a cellular coverage solution designed to boost signal in vehicles and small spaces.
What are the suitable applications for this product?
The CEL-FI ROAM R41 unit is designed to work in a small space such as a car or caravan when used with the appropriate antenna. You can also use it to boost signal in a single small room using the Caravan Booster Pack with a 12V power supply. A power supply can be purchased separately.
What range of improvement in signal can I expect?
The CEL-FI ROAM R41 unit will boost cellular signal from one bar up to full bars but requires at least one bar of signal to be available.
What are the supported Network Carriers?
The CEL-FI ROAM R41 unit works with Telstra, Optus & Vodafone. (Telstra branded units will only work with Telstra)
Can I use ROAM R41 with more than one mobile network at once?
No, the CEL-FI ROAM R41 will only work with one operator at a time.
What is the Nextivity WAVE App?
The Nextivity WAVE app is for product registration, configuration and provides an interface to switch carriers. The app connects via bluetooth and is available on iOS and Android devices.
www.benelec.au
Benelec Pty Ltd. 17 Byrnes St,
Botany NSW 2019, Australia
+61-2-8397-3333
reception@benelec.com.au
www.benelec.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>