Hishel X5 Portable Thermal Printer Mini Wireless Bluetooth Instruction Manual
- August 13, 2024
- Hishel
Table of Contents
Portable mini printer
Operating Manual
X5 Portable Thermal Printer Mini Wireless Bluetooth
‘Wann Prompt: Specifications and parameters may be changed depending:
on the configuratem of the model. Please refer to the actual product.
Brief Introduction
Thank you for using the intelligent digital products produced by our company.
We have randomly equipped with detailed instructions, from which you can
obtain instructions on the use of the products. Please read the instructions
carefully before you start using this machine.so as to facilitate you to use
this product accurately.
‘When the contents involved are changed. no notice willbe given.
This product 1s aunique sheape. exquisite design,easy to operate Portable mini
primer designed for children’s digital products.so that children in use to
learn more imagination play, experience the fim of nature.
Maintenance and maintenance
This product should not be placed in wet environment for a long time,please wipe the surface stains with dry cloth. Wires. plug shells and other components nist be regularly checked for damage.and damage should be stopped inunediately until repaired.in order to teduce battery aging and swelling: If it is not used for a long time.it needs to be charged once every three months or so
Key-interface specification
Indicator status
Green light flash: Normal use sunmns.
Red hight on: Out of gaper/Overkeat/Coves opeaed.
Red’Grore ght Hach: low power
Product specification
battery capacity:1200mAh Printing
Sharpness: 200dpi Paper
method: inkless printing Display
size: 5726MM6M
method: Black and white Product
bluetooth: 2.1/4.2 Input
Size: 82X82X45MM
powers: DC5SW2A
Use the wizard
-
First use please charge first, long press the power key 3 seconds to boot.
-
Apple store or Google search: Tiny Print insalled APP to use. print record
-
After bluetooth is enabled.use the app downloaded from the mnobile phone to connect to the Bluetooth printer in the TAB bar of “My device”, After successful connection, the note can be printed.
Paper replacement course press both sides inward according to the direction indicated by arrow 1, while opening the paper bin cover lid upward as shown in arrow2. Take out the old paper roll and put the new paper roll in the direction shown. The paper should be put straight and not crooked.(Note: The new thermosensitive paper needs to be exposed to 2 cm of paper bin length so that the machine can absorb paper automatically when the paper bin is shaped) Cover the paper bin.the machine can automatically absorb paper after normal use
After the above steps are correct. the machine can print normally.
Battery Waming Note
- Please use 5V charger to charge according to the specification to avoid damage to the machine
- Disassembly. impact. extrusion or fire are prohibited;
- If severe bulging occurs, do not continue to use,
- Do not put in high temperature environment, battery after immersion is prohibited to use:
- Replacement with the wrong type of battery can be explosive. be sure to follow the instructions to dispose of used batteries.
Matters needing
- when charging. please gently insert or pull out the charging line to prevent excessive force damage to the port:
- After charging, please unplug the charging line in time
- In order to avoid danger. do not use or charge in high temperature. high humidity, excessive smoke and dust environment. such as: bathroom, steam room. open fire. etc:
- Improper charging may lead to print head damage ;
- Deo not touch the print head to prevent overheating and scalding ;
- Tear paper blade sharp, be careful not to touch ;
- Contains small parts, not suitable for children under three years of age to use
- The Guardian should be in custody while the child is playing.