Breeze Ease 38771 2 In 1 Fan and Light Instruction Manual
- August 13, 2024
- Breeze Ease
Table of Contents
Breeze Ease 38771 2 In 1 Fan and Light
Product Information
Specifications
- Input Voltage: 100-265VAC
- Power Consumption: 25W
- Number of LEDs: 54 High-Intensity LED Bulbs
- Luminous Flux: 1000 Lumens
- Socket Compatibility: E26/E27 Light socket base
Product Usage Instructions
Assembly
Fan blades come packed separately from the main power unit. Assembly is
required. Insert each blade into the tab until it clicks in. Blades can only
be inserted one way.
Installation
No tools required. Turn the power OFF using the wall light switch for that
socket before installing the unit. Follow the steps provided in the manual for
a safe and secure installation.
Safety Features
The product is equipped with a safety feature that stops the fan if the blades
come in contact with an object during operation. Follow the provided options
to restart the fan safely.
Using the Remote Control
The remote control has a working distance of up to 40 feet. Use the buttons on
the remote to control the On/Off function, fan speed, light settings,
brightness levels, and light modes.
Memory Feature
If the remote is misplaced, the Socket Fanlight can be operated via the wall
light switch using the Memory Feature. The last light setting will be saved
for convenient use.
Important Safeguards
Keep the fan out of reach of children. Do not bend the blade brackets to
reduce the risk of personal injury.
For Indoor Use Only
This product is designed for indoor use only. Do not use it outdoors.
FAQ
-
Q: Can the LEDs be replaced?
A: No, the LEDs are non-replaceable in this product. -
Q: What should I do if the fan blades come in contact with an object during operation?
A: The safety feature will stop the fan. Follow the provided options in the manual to safely restart the fan. -
Q: How do I operate the Socket Fanlight if I lose the remote?
A: You can operate the Socket Fanlight via the wall light switch using the Memory Feature. The last light setting will be saved for your convenience.
ASSEMBLY
NOTE: Fan blades come packed separately from the main power unit.
Assembly is required.
Insert each blade into the tab until it clicks in, as shown on right. The
blades can only be inserted one way.
INSTALLATION No tools required.
Turn the power OFF using the wall light switch for that socket before installing the unit.
EQUIPPED WITH SAFETY OFF FEATURE
lf the blades come in contact with an object during operation, the fan will
stop.
To restart:
-
Option A: Just wait 4-5 seconds, the fan will resume automatically.
-
Option B: Turn the power OFF using the wall light switch for that socket.
Wait for 4-5 seconds,then switch it back on. Last used light setting will resume. -
Option C: Just wait 4-5 secnds before using the remote control again.
- Remove the protective cap.
- While holding the unit as shown above (holding part A and part B at the same time), twist the Socket Fanlight clockwise to install it. Do not over tighten, but make sure the fan is fully secured.
- If needed, use the socket extender. Screw it in clockwise. Do not over tighten, but make sure the fan is fully secured. Then, follow step 2 to install the Socket Fanlight unit.
- Turn the Socket Fanlight ON using the wall light switch for that socket. The light will turn on High setting, fan will be off. To turn on the fan or change the light settings use the included remote. Refer to “USING THE REMOTE” section on next page.
Use the wall light switch to turn the unit OFF (fan and light).
USING THE REMOTE
Remote working distance: up to 40 feet(12m)
- On/Off
- Fan
- Light
- + Increases brightness
- – Decreases brightness
- Adjusts light mode
IN CASE THE REMOTE IS MISPLACED
Socket Fanlight can be operated via wall light switch (Memory or Default Setting) in case the remote is misplaced or lost.
MEMORY FEATURE (wall light switch only):
-
If you turn the unit off via a wall light switch, the last Light setting will be saved.
For example: if the Light was set on High brightness, the same setting will resume when you turn the unit back on using the wall light switch. -
Once you turn the wall light switch back on, the default setting will briefly engage, followed by the last light setting.
NOTE: lf you turn off both, the Light and Fan via remote, when the wall light switch is turned back on, the default setting will be used.
THE LEDs ARE NON-REPLACEABLE.
FOR INDOOR USE ONLY
SPECIFICATIONS
- 100-265VAC,25W
- 54 High Intensity LED Bulbs
- 1000 Lumens
- Suitable for E26/E27 Light socket base
IMPORTANT SAFEGUARDS
- KEEP FAN OUT OF REACH OF CHILDREN.
- WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING THE BLADES,OR CLEANING THE UNIT. DO NOT INSERT FOREIGN OBJECTS IN BETWEEN ROTATING FAN BLADES.
- CAUTION: TO REDUCE THE RISK OF INJURY TO PERSONS, INSTALL UNIT AT LEAST 8 FEET (2.43 M)ABOVE THE FLOOR.
- CONSULT A QUALIFIED ELECTRICIAN TO ENSURE THE CORRECT BRANCH CIRCUIT CONDUCTOR.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- THIS DEVICE CAN ONLY BE INSTALLED ON STATIONARY LIGHT SOCKETS, CANNOT BE INSTALLED ON ANY NON-STATIONARY OR LOOSE-SETTING LIGHT SOCKETS.
- TO REDUCE THE RISK OF ELECTRIC SHOCK, THIS UNIT MUST BE INSTALLED WITHIN ISOLATING WALL CONTROL/SWITCH.
- DUE TO SOCKET FANLIGHT HIGH-INTENSITY LED BULBS, DO NOT STARE DIRECTLY INTO THE LED LIGHT.
- RISK OF ELECTRIC SHOCK – USE IN DRY LOCATION ONLY.
- SWITCH OFF THE POWER BEFORE INSTALLING THE UNIT. NEVER PLACE ANYTHING OVER THE FAN OR INTO THE UNIT BLADES WHEN IT’S RUNNING.
- SUITABLE ONLY FOR FIXTURES WHERE THE BULB IS NOT FULLY ENCLOSED.
- DO NOT USE WITH DIMMERS.
- DO NOT PLACE OBJECTS NEAR THE UNIT.
- ADDED WEIGHT OF THE DEVICE MAY CAUSE INSTABILITY OF A FREE-STANDING PORTABLE LUMINAIRE.
- THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
- DO NOT OPERATE ANY APPLIANCE AFTER IT MALFUNCTIONS, OR IS DROPPED, OR DAMAGED IN ANY MANNER. RETURN THE APPLIANCE TO THE NEAREST AUTHORIZED SERVICE FACILITY FOR EXAMINATION, REPAIR OR ELECTRICAL OR MECHANICAL ADJUSTMENT.
- UNIT SHOULD BE TURNED OFF WHEN NOT IN USE OR DURING CLEANING. FAN HAS TO COME TO A COMPLETE STOP BEFORE HANDLING IT.
FCC STATEMENT
This device complies with part 15 of the FCC Rules.Operation is subject to the
following two conditions: (1)This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. f this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>