VOLLRATH 3894660 Cafeteria Breath Guard Installation Guide
- August 12, 2024
- VOLLRATH
Table of Contents
3894660 Cafeteria Breath Guard
“`html
Specifications:
- Product Name: Cafeteria Breath Guard
- Model: One Piece and Three Piece options available
- Manufacturer: Vollrath Company, L.L.C.
- Item No.: 2350030-01 Rev 04/12
Product Usage Instructions:
One Piece Breath Guard Installation:
- Install the breath guard uprights (A) to the studs (B) securing
with cap nuts (C) as shown in Figure 1. Repeat for all four
uprights.
Three Piece Breath Guard Installation:
-
Install the breath guard uprights (A) to the studs (B) securing
with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four
uprights. -
Install the breath guard support tube (D) between the uprights
(A) securing with cap nuts (C) as shown. Repeat on the other
side. -
Install the side breath guards (E) securing with screws (F) and
cap nuts (C) as shown. Repeat for all mounting locations. -
Install the side shield (G) to the support tube (D) securing
with cap nuts (C) as shown. Repeat on the other side. -
Install the support bar and stud assembly (H) to the side
breath guards (E). Repeat for all mounting locations. -
Install the top breath guard (I) to the support bar and stud
assembly (H) securing with cap nuts (C). Repeat for all mounting
locations.
FAQ:
Q: What should I do if I accidentally over tighten the cap
nuts?
A: If you accidentally over tighten the cap nuts, stop
immediately to prevent cracking of the plastic. Loosen the cap nuts
slightly until they are secure without applying excessive
force.
Q: Can I use additional tools for installation?
A: It is recommended to only use the provided tools and avoid
using additional tools that may cause damage to the product.
“`
Installation Instructions
One Piece cafeteria Breath Guard three Piece cafeteria Breath Guard
These instructions cover the installation of the one pice Cafeteria Breath
Guard and the three piece Cafeteria Breath Guard.
One Piece Breath Guard installatiOn
Some units are shipped with a breath guard not installed. To install the
breath guard follow these steps: NOTE: Use caution when tightening the cap
nuts. Overtightening may cause the plastic to crack. 1. Install the breath
guard uprights (A) to the studs (B) securing with cap nuts (C)
as shown. See Figure 1. Repeat for all four uprights.
three Piece Breath Guard installatiOn
Some units are shipped with a breath guard not installed. To install the
breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the
plastic to crack.
1. Install the breath guard uprights (A) to the studs (B) securing with cap
nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.
c
i
a c
f e
c
h c e
G
e
a c e
f
a
a
B
c
B G
c
Bd
c
a
Figure 1. One Piece Breath Guard Installation
2. Install the breath guard support tube (D) between the uprights (A)
securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the one piece breath guard (E) securing with screws (F) and cap
nuts (C) as shown. Repeat for all four mounting locations.
4. Install the side breath protector (G) to the support tube (D) securing
with cap nuts (C) as shown. Repeat on the other side.
a c
c
a
a
B
G
c
B
c
Bd
Figure 2. Three Piece Breath Guard Installation
2. Install the breath guard support tube (D) between the uprights (A)
securing with cap nuts (C) as shown. Repeat on the other side.
3. Install the side breath guards (E) securing with screws (F) and cap nuts
(C) as shown. Repeat for all mounting locations.
4. Install the side shield (G) to the support tube (D) securing with cap nuts
(C) as shown. Repeat on the other side.
5. Install the support bar and stud assembly (H) to the side breath guards
(E). Repeat for all mounting locations.
6. Install the top breath guard (I) to the support bar and stud assembly (H)
securing with cap nuts (C). Repeat for all mounting locations.
Item No. 2350030-01 Rev 04/12
www.vollrathco.com
The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A. Main Tel: 800.628.0830 Service Tel: 800.628.0832 FAX: 800.752.5620
Vollrath of Canada, Co. Tel: 800.695.8560 FAX: 800.752.5620
© 2010 The Vollrath Company, L.L.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>