CAFE CXADTH1PVBZ Brushed Bronze Dishwasher Handle Kit Instruction Manual

Table of Contents

Specifications

Removing the Handle

Locate the set screws on the handle caps (usually on the less visible side).
Loosen the set screw on one end using the 1/8 Allen wrench while supporting the handle. Do not remove the set screw from the handle cap.
Continue supporting the handle while loosening the set screw on the other handle cap. Lift the handle from the fasteners on the door and set it aside.

Replacing a New Handle

Ensure that the set screws are loosened. Place the new handle over the fasteners of the door, with the screw side facing the less visible side. Support the handle to prevent scratches on the appliance finish and ensure that both handle caps are resting on the face of the door.
Lock one end of the handle into position by tightening the set screw in the handle cap using the 1/8 Allen wrench. Avoid over-tightening.
Continue supporting the handle and lock the other end into position by tightening the set screw in the handle cap with the 1/8 Allen wrench. Avoid over-tightening.
Repeat these steps for any additional handles.

FAQ

Q: What should I do if the fasteners are loose when I remove the old handle?
A: If the fasteners are loose, tighten them with a 3/16 Allen wrench before attaching the new handle.
Q: Can I replace multiple handles on my appliance?
A: Yes, for appliances with multiple handles, ensure that you match the replacement handles with the existing logo and set screw positions.

Replacing Your Café Handles

Instructions: www.cafeappliances.com/kit- instructions

IMPORTANT!

The handle on your appliance may have a different orientation than what is shown, but the installation will be the same.
Be extra careful of the appliance ﬁnish around the handle area, as it can scratch. During removal of the handle screws, hold onto the handle tightly so it won’t fall and scratch the appliance. We recommend having another person help you hold the handle in place as you remove the screws.
When the handle has been removed, check the fasteners that are attached to the appliance front to see if they are loose. If so, tighten them with a 3/16” Allen wrench before attaching the new handle.
Note: Fastener shape may vary by appliance.
For appliances with multiple handles, look at your current conﬁguration before removing the handles, and make sure the replacement handles match that logo and set screw position.

Tools You Will Need

Locate the set screws on the handle caps (they are usually on the less visible side).
Loosen the set screw on one end with the 1/8” Allen wrench while supporting the handle. Do not remove the set screw from the handle cap.
Keep supporting the handle while you loosen the set screw on the other handle cap. Lift the handle from the fasteners on the door and set aside.

Make sure the set screws are loosened. Place the handle over the fasteners of the door (we recommend putting the screw side of the handle toward the less visible side). Take care to support the handle so it doesn’t fall and scratch the appliance ﬁnish. Make sure both the handle caps are resting on the face of the door.
Lock one end of the handle into position by tightening the set screw in the handle cap with the 1/8” Allen wrench. Be sure not to over tighten.
Keep supporting the handle as you lock the other end of the handle into position by tightening the set screw in the handle cap with the 1/8” Allen wrench. Be sure not to over tighten.

Repeat these instructions on all other handles.
31-2000163 Rev. 2 08-18