VOLLRATH 5960935 Induction Template Installation Guide
- August 11, 2024
- VOLLRATH
Table of Contents
VOLLRATH 5960935 Induction Template
Product Specifications
- Manufacturer: Vollrath
- Product: Induction Template
- Compatibility: Vollrath drop-in induction cookers and warmers
- Material: High-quality construction
- Includes: Clamps, fasteners, nuts, washers
Product Usage Instructions
Pre-Installation Steps
-
Ensure the induction template is compatible with your Vollrath
induction cooker or warmer. -
Measure the template, induction unit, and countertop to confirm
fit before installation.
Installation Process
- Only allow qualified service personnel to install the induction template.
- Apply food-grade silicone around the edge of the template to secure it in place and prevent liquid ingress.
- Use a minimum of four clamps for two hob templates and eight clamps for four hob templates, evenly spaced.
- Maintain proper clearance and air circulation for the induction unit as per the operator’s manual.
- Consider drawer, door, and other clearances before installation.
Maintenance
Regularly clean the induction template and unit as per the manufacturer’s
instructions to ensure optimal performance and longevity.
Vollrath Induction Template Instructions
The Vollath induction templates are specially manufactured to the highest standards. To maximize the life and beauty of these surfaces, read and follow all the instructions.
-
The Vollrath induction template must only be installed by qualified service or installation personnel
-
These induction templates should only be used with Vollrath drop-in induction cookers and warmers. The top of the induction unit must be in contact with the bottom of the induction template for proper operation.
-
Measure the induction template, induction unit, and countertop prior to installation to verify the template will fit.
-
Apply food-grade silicone between the induction template and the countertop around the entire edge. This will help the template stay in place and reduce liquid from entering the induction unit.
-
A minimum of four clamps must be used with two hob templates and a minimum of eight clamps evenly be used with four hob induction templates.
All clamps must be evenly spaced. -
All clearance and air circulation requirements for the induction units) must be maintained. See the unit’s operator’s manual specifications.
-
Drawer, door, and other clearances need to be considered before installation of the Vollrath temple and the Vollrath induction unit.
-
Due to the variety of installation applications and installation methods, Vollrath is not responsible for damage to the induction template or induction unit during installation or subsequent use.
INSTALLATION OF VOLLRATH INDUCTION TEMPLATES
-
The strategy or method you choose may differ from the one listed below. Figure 1 shows the method currently used to install an induction template to a
-
Vollrath Buffet Table. Figure 2 shows another method which can be used. Note: All clips, clamps and fastening hardware shown is customer provided.)
-
A Vollrath induction template.
-
B Countertop or tabletop.
-
C Vollrath drop-in induction unit.
Clamp. Figure 1 shows a wood clamp. Figure -
D shows a metal clamp commonly used for mounting under cabinet sinks.
-
E Fastener.
-
F Nut.
-
G Washer.
Frequently Asked Questions
- Q: Can the Vollrath induction template be used with other induction cookers?
- A: No, the induction template is designed specifically for use with Vollrath drop-in induction cookers and warmers for optimal performance.
- Q: How many clamps are required for installation?
- A: A minimum of four clamps for two hob templates and eight clamps for four hob templates should be used, evenly spaced for proper installation.
- Q: What should be done to prevent liquid from entering the induction unit?
- A: Apply food-grade silicone around the entire edge of the induction template to create a seal and prevent liquid ingress.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>