VOLLRATH 5960835 Induction Template Installation Guide
- August 12, 2024
- VOLLRATH
Table of Contents
VOLLRATH 5960835 Induction Template
Product Specifications
- Manufacturer: Vollrath
- Product: Induction Template
- Compatibility: Vollrath drop-in induction cookers and warmers
- Material: High-quality surface
- Clamp Requirement: Minimum 4 clamps for two hob templates,
minimum 8 clamps for four hob templates
Vollrath Induction Template Instructions
The Vollrath induction templates are specially manufactured to the highest standards. To maximize the life and beauty of these surfaces, read and follow all the instructions.
- The Vollrath induction template must only be installed by qualified service or installation personnel.
- These induction templates should only be used with Vollrath drop-in induction cookers and warmers. The top of the induction unit must be in contact with the bottom of the induction template for proper operation.
- Measure the induction template, induction unit, and counter top prior to installation to verify the template will fit.
- Apply food grade silicone between the induction template and the countertop around the entire edge. This will help the template stay in place and reduce liquid from entering the induction unit.
- A minimum of four clamps must be used with two hob templates and a minimum of eight clamps evenly be used with four hob induction templates. All clamps must be evenly spaced.
- All clearance and air circulation requirements for the induction unit(s) must be maintained. See the unit’s operator’s manual specifications.
- Drawer, door and other clearances need to be consider prior to installation of the Vollrath temple and the Vollrath induction unit.
- Due to the variety of installation applications and installation methods Vollrath is not responsible for damage to the induction template or induction unit during installation or during subsequent use.
Clamp Usage
Use a minimum of four clamps for two hob templates and a minimum of eight
clamps for four hob templates. Ensure even spacing.
Installation of Vollrath Induction Templates
The strategy or method you choose may differ from the one listed below. Figure 1 shows the method currently used to install an induction template to a Vollrath Buffet Table. Figure 2 shows another method which can be used. ( Note : All clips, clamps and fastening hardware shown is customer provided.)
- A. Vollrath induction template.
- B. Countertop or tabletop.
- C. Vollrath drop-in induction unit.
- D. Clamp. Figure 1 shows a wood clamp. Figure 2 shows a metal clamp commonly used for mounting under cabinet sinks.
- E. Fastener.
- F. Nut.
- G. Washer.
Clearances and Considerations
- Maintain all clearance and air circulation requirements as per the unit’s operator’s manual.
- Consider drawer, door, and other clearances before installation.
Frequently Asked Questions (FAQ)
Q: Can I install the Vollrath induction template myself?
A : The induction template must only be installed by qualified service
or installation personnel for safety and proper function.
Q: How many clamps are required for installation?
A : Use a minimum of four clamps for two hob templates and a minimum of
eight clamps for four hob templates, ensuring even spacing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>