JohnDow Industries JDI-MBS1-EV Two Sided Cart User Manual

JohnDow Industries JDI-MBS1-EV Two Sided Cart

Product Specifications:

• Part No.: JDI-MBS1-EV
• Dimensions: Varies based on assembly
• Materials: Steel, Nylon

Product Usage Instructions

Getting Started:
If any parts are missing or damaged per the contents list below, please contact us.

Assembly Instructions:

1. Assemble stem casters to lower T-frames using (4) M10 nut, lock washer, and flat washers.
2. Assemble base covers to the lower T-frames using (16) M6 x 42 pan head cap screws, washers, and nylon insert nuts. Do not tighten until the next step.
3. Fasten together the two base panels covers using (2) M6 x 16 hex head cap screws, washers, and hex nuts. Tighten all M6 x 42 pan head screws and nuts to secure the covers to the T-frames.
4. Slide the lower channels over upright tubes.
5. Insert upper frames tubes. Tap on end to make sure it fits tightly. Secure the upper and lower frame joint using (4) M6 x 10 pan head screws.
6. Place top header between frame sides and fasten using (4) M6 x 42 pan head screws, and washers. Assemble upper channels, handle, and top Shepards Hook mounting bracket as shown using (4) M6 x 42 pan head cap screws, washers, and nylon insert lock nut.
7. Attach lower Shepards hook mounting bracket as shown using (2) M5 x 20 pan head screws, washers. The remaining (2) M5 x 20 pan head cap screws are for mounting plastic mounting clip (sold separately) with Shepards Hook.
8. Slide (8) pegboard panels, 4 per side, into the channel as shown.

Frequently Asked Questions:

1. Q: What tools are required for assembly?
   A: Flat Blade, #2 Phillips Screwdrivers, 17mm Wrenches or Sockets, 10mm (requires 2).

2. Q: Where can I find service assistance?
   A: You can call 800-433-0708 or visit JOHNDOW.COM for service assistance.

FOR WARRANTY INFORMATION, PLEASE CALL800-433-0708
DATE OF PURCHASE:
READ AND SAVE THIS MANUAL
FOR SERVICE ASSISTANCE, CALL 800-433-0708 OR VISIT JOHNDOW.COM

GETTING STARTED
If there are any parts are missing or damaged per the contents list below, please contact us.

CONTENTS

TOOLS (not included)
Flat Blade, #2 Phillips Screwdrivers  10mm (requires 2)
17mm Wrenches or Sockets

ASSEMBLY INSTRUCTIONS

1. Assemble stem casters to lower T-frames using (4) M10 nut, lock washer, and flat washers (Figure 1).

2. Assemble base covers to the lower T-frames using (16) M6 x 42 pan head cap screws, washers, and nylon insert nuts. Do not tighten until the next step (Figure 2).

3. Fasten together the two base panels covers together using (2) M6 x 16 hex head cap screws, washers, and hex nuts.
   Tighten all M6 x 42 pan head screws and nuts to secure the covers to the T-frames (Figure 3).

4. Slide the lower channels over upright tubes (Figure 4).

5. Insert upper frames tubes. Tap on end to make sure it fits tightly. Secure the upper and lower frame joint using (4) M6 x 10 pan head screws (Figure 5).

6. Place top header between frame sides and fasten using (4) M6 x 42 pan head screws, and washers.
   Assemble upper channels, handle, and top Shepards Hook mounting bracket as shown using (4) M6 x 42 pan head cap screws, washers, and nylon insert lock nut (Figure 6).

7. Attach lower Shepards hook mounting bracket as shown using (2) M5 x 20 pan head screws, washers (Figure 7).
   The remaining (2) M5 x 20 pan head cap screws are for mounting plastic mounting clip (sold separately) with Shepards Hook.

8. Slide (8) pegboard panels, 4 per side, into the channel as shown (Figure 8).

FOR SERVICE ASSISTANCE, CALL 800-433-0708 OR VISIT JOHNDOW.COM

References

• Automotive Aftermarket Products | Repair Facility Equipment & Supplies

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>