aina ASB1-2 PTT Smart Button 2 User Guide
- August 11, 2024
- aina
Table of Contents
aina ASB1-2 PTT Smart Button 2
Product Information
Specifications:
- Operating frequency range : 2400 – 2483.5MHz
- Bluetooth power level: Class 2 (Smart 2.5mW)
Product Usage Instructions
Flipping and Inserting the Button Cell Battery
- Unscrew the button cell battery cover counterclockwise with a tool or coin until it pops up.
- Remove the cover, flip, and re-insert the button cell battery.
- Put the cover back on top.
- Gently push down the cover and screw it clockwise to secure it into place.
- NOTE: The device will be constantly ON when the button cell battery is inside. To turn the device OFF, remove the battery.
Bluetooth Pairing
- Press all three buttons simultaneously for 3 seconds to put the device into pairing mode (and remove any previous pairings).
- Open the phone’s Bluetooth settings and turn this function on.
- Select your device from the list.
- NOTE: The PTT Smart Button 2 will move from ‘Available devices’ to ‘Paired devices’, but it will not appear as connected.
INCLUDED IN THE PACKAGE
BUTTONS AND PARTS
FLIPPING AND INSERTING THE BUTTON CELL BATTERY
(1)
(2)
- Unscrew the button cell battery cover counterclockwise with a tool or coin until it pops up.
- Remove the cover, and remove, flip, and re-insert the button cell battery.
- Put the cover back on top.
- Gently push down the cover and screw it clockwise to secure it into place.
NOTE! When the button cell battery is inside, the device will be constantly ON. To turn the device OFF, you must remove the battery.
BLUETOOTH PAIRING
(1)
- Press all three buttons simultaneously for 3 seconds to put the device into pairing mode (and remove any previous pairings)
- Open the phone’s Bluetooth settings and turn this function on 3. Select your device from the list. NOTE! Your PTT Smart Button 2 will move from ‘Available devices’ to ‘Paired devices’, but it will not appear as connected.
ADDITIONAL SAFETY TIPS
- Operating temperature: -20°C – +60°C
- Operating frequency range: 2400 – 2483.5MHz
- Bluetooth power level: Class 2 (Smart 2.5mW)
OPERATION
For more detailed instructions on setting up and using your PTT Smart Button 2, please visit www.ainaptt.com
CUSTOMER CARE
If any part of the equipment is damaged on arrival, contact the shipper to conduct an inspection and prepare a damage report. Save the shipping container and all packing materials until the inspection and the damage report are completed. In addition, contact Customer Care to make arrangements for replacement equipment. Do not return any part of the shipment until you receive detailed instructions from an AINA Wireless Finland Oy representative.
Contact Customer Care at: + 358 40 322 6717 or support@ainaptt.com
LEGAL GUIDELINES
AINA Wireless Finland Oy is continuously evaluating technical publications
that have been produced for completeness and technical accuracy. You can
assist us in this process by submitting your comments and suggestions to the
following address:
- AINA Wireless Finland Oy
- Joensuunkatu 7G 24100 Salo Finland Or
- email us to support@ainaptt.com
SAFETY CONVENTIONS
The following conventions are used throughout this manual to alert the user
to general safety precautions that must be observed during all phases of
operation, service, and repair of this product. Failure to comply with these
precautions or with specific warning elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the product. AINA
Wireless Finland Oy assumes no liability for the customer’s failure to comply
with these standards.
DECLARATION OF CONFORMITY
The material contained herein is subject to U.S. export approval. No export
or re-export is permitted without written approval from the U.S. Government.
Rated: EAR99 in accordance with U.S. Dept. of Commerce regulations 15CFR774,
Export Administration Regulations. Repairs to this equipment should be made
only by an authorized service technician or facility designated by the
supplier. The opening of the device’s back cover or any repairs, alterations
or substitution of parts made to this equipment not approved by the
manufacturer will void the user’s authority to operate the equipment in
addition to the manufacturer’s warranty. This product conforms to the European
Union WEEE Directive 2012/19/EU. Do not dispose of this product in a public
landfill or open fire. Take it to a recycling center at the end of its life.
Hereby, AINA Wireless Finland Oy declares that the radio equipment type AINA
PTT Smart Button 2 (ASB2) is in compliance with Directive 2014/53/EU The full
text of the EU declaration of conformity is available from the following
internet address:
www.ainaptt.com/certifications
REGULATORY
FCC Part 15: 15.21
Warning : Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
15.105(b)
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions to satisfy RF exposure compliance. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
WASTE (DISPOSAL) OF YOUR ELECTRONIC AND ELECTRIC EQUIPMENT
European Union (EU) Waste of Electrical and Electronic Equipment (WEEE)
directive. The European Union’s WEEE directive requires that products sold
into EU countries must have the crossed-out wheelie bin label on the product
(or the package in some cases). As defined by the WEEE directive, this
crossed-out wheelie bin label means that customers and end-users in EU
countries should not dispose of electronic and electrical equipment or
accessories as household waste. Customers or end-users in EU countries should
contact their local equipment supplier or service centre for information on
the waste collection system in their country.
CREDITS
AINATM is a registered trademark and is of AINA Wireless Finland Oy.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. Apple®, iTunes®,
iPhone®, and iPad® are registered trademarks of Apple Inc. iOS™ is a trademark
or registered trademark of Cisco in the U.S. and other countries and is used
under license. Google® is a registered trademark of Google Inc. Android™,
Google Maps™, Google Earth™, Google Play™, and Gmail™ are trademarks of Google
Inc. All brand and product names are trademarks, registered trademarks, or
service marks of their respective holders.
This manual is published by AINA Wireless Finland Oy without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by AINA Wireless Finland Oy at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of AINA Wireless Finland Oy. Copyright © 2023, AINA Wireless Finland Oy.
Printed in Estonia.
FAQ
1. What should I do if any part of the equipment is damaged on arrival?
If any part of the equipment is damaged on arrival, contact the shipper to
conduct an inspection and prepare a damage report. Save the shipping container
and all packing materials until the inspection and the damage report are
completed. In addition, contact Customer Care to make arrangements for
replacement equipment. Do not return any part of the shipment until you
receive detailed instructions from an AINA Wireless Finland Oy representative.
2. How can I contact Customer Care for assistance?
You can contact Customer Care at +358 40 322 6717 or via email at
support@ainaptt.com for assistance with any
queries or issues related to the product.