YEEUU W1 Smart Deadbolt User Guide

YEEUU W1 Smart Deadbolt

FAQ

Q: Can I use rechargeable batteries with the W1 Smart Deadbolt?

A: No, only use 4*AA Alkaline Batteries (LR6 marked on the package) with the device.

Q: What is the storage capacity for fingerprints and access codes?

A: The device can store up to 100 access codes and up to 50 fingerprints.

We are committed to ensuring you have a smooth setup experience.

IMPORTANT NOTES

Please read the precautions below carefully for better use.

Factory Default Mode|

W1 is not bound to the App. Any fingerprint and initial code ” 123456 ” can access it.

---|---

Fingerprint Identification

| Dry, wet, oily, or dirty fingers may affect the identification of fingerprints.

The old and the young have shallow fingerprints, which may make the W1 recognition system less sensitive.

Outdoor locking

| Press “ ” to lock W1 automatically.

Battery Specification

|

Be sure to use 4*AA Alkaline Batteries (LR6 marked on the package).

Do not use Zinc-carbon Dry Batteries (R6 marked on the package) or Rechargeable Batteries. Please do not reuse the old batteries when replacing new batteries.

Emergency Power Supply

|

When using the USB-C port for supply, please ensure that the voltage is below 5V.

Bluetooth Signal

|

The strength of the Bluetooth signal can be improved by shortening the distance between your phone.

Operating Environment

|

Please avoid using W1 in direct sunlight or humidity, which may cause temporary dysfunction or shorten its life.

WHAT’S IN THE BOX

PRODUCT OVERVIEW

TECHNICAL PARAMETERS

Access Methods

| App(Via Bluetooth), Fingerprint, Code, Emergency Key.

(Remote control and Amazon Alexa & Google Assistant require ）

Battery Specification| 4*AA Alkaline Batteries (LR6 marked on the package)

Battery Life

| Up to 12 Months (Unlock 10 times a Day)
---|---

Storage Capacity

|

100 PCS(Codes are up to 100, Fingerprints up to 50 each)

Material

|

Aluminum Alloy & Stainless Steel

Working Temperature

|

Exterior Assembly: -40 °F ~ 131 °F (-40°C ~ 55°C）

Interior Assembly: 14 °F ~ 131 °F (-10°C ~ 55°C）

GETTING STARTED

Ensure the conditions below for the proper installation of the W1.

• Measure to confirm that your door and door frame fit the dimensions shown.
• Please remove your original door and bolt.
• The original strike box can be retained for use.

INSTALLING GUIDE

1. Installing Bolt

2. Installing Exterior Assembly

3. Installing Mounting Plate

4. Installing Interior Assembly

5. Installation Testing

Please ensure the above operation is successful before connecting to the App. If any of the above tests are abnormal, please contact us for technical support.

INSTRUCTIONS

1. Permission Settings
   Please select the corresponding lock device on App and connect it. Follow the UI prompts to set and manage the member, fingerprint, and code. You can manage the corresponding fingerprint, and code permissions of members after selecting them.

2. App Management
   For Bluetooth access, the smartphone must be within 5 meters of W1 and ensure Bluetooth and W1 are connected.
   The effective distance of Bluetooth will be affected by barriers such as walls, especially metal walls. At the same time, the Bluetooth signal will also be affected by the surrounding wireless environment. These effects can be reduced by being closer to W1.

3. Fingerprint Access
   Place an authorized finger on the Fingerprint Reader to access it.
   Please use the central area of the Fingerprint Reader while keeping the fingerprint clean.
   The old and the young have shallow fingerprints, which may make the W1 recognition system less sensitive.

4. Code Access
   Enter the code, and press “ ” to unlock W1.
   Setting the valid time for codes and even adding cycle functions can be done in the App.

5. Anti-Peep Passcode
   To prevent others from peeking at your access code, you can enter any number to enhance security before entering the right code. Method: Unlimited Digits + Correct Passcode + Up to 9 Digits.

6. Emergency Key Access
   Lift the Battery Cover, and insert the key to lock & unlock.

7. Emergency Power Supply
   Separate the Deadbolt Plate to find the USB Port interface, and use a power bank or a phone that supports charging. Please ensure that the voltage is below 5V. Otherwise, it may fail to charge or even damage W1.

8. Trial & Error Lock
   Dead Status: W1 will reject identifying any fingerprint, or code after repeated identification errors, which can effectively prevent unauthorized members from violent unlocking.
   Trigger Conditions: W1 will lock for 5 minutes after 10 consecutive failed accesses (fingerprint/code) within 2 minutes. W1 will flash the RED indicator 5 times for any access during the period.
   Recovery: You must wait 5 minutes or unlock it in advance using the App.

9. Low Battery Alarm
   Low Battery Alert: When the battery is almost dead, the red light will flash for 1 second after unlocking. It can be used approximately 30 days normally after the initial alert.
   Low Battery Locked Status: If the batteries aren’t replaced in time, the LED Indicator will flash RED 3 times when unlocking, but it cannot be accessed.

10. Reset the Lock
    Select the device on the App and click ” Remove Device ” to reset your lock.
    Note: All data will be erased if you reset W1 to Factory Default Setting.

11. LED Indicator

NEED HELP?
Please contact us for technical support if viewing the user guide can’t solve your problem.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>