ikitbot S55 Commercial Cleaning Robot Maximize Your Cleaning Potential User Manual

: August 9, 2024
: ikitbot

Table of Contents

ikitbot S55 Commercial Cleaning Robot Maximize Your Cleaning Potential
Introduction
Product Overview
Specifications
What’s in the Box
Maintenance
Safety Warnings
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ikitbot S55 Commercial Cleaning Robot Maximize Your Cleaning Potential

Read this manual before using the product. Keep this manual properly for future reference

Introduction

This manual is designed to help owners and operators understand the basic instructions in order to operate and maintain the robot. Improper use of this product may cause serious injury to yourself or others, or cause product damage and property loss. Once you use this product, it is deemed that you understand, approve and accept all the terms and content in this document. If you encounter any problems during use, please contact our after-sales customer service for support. The pictures and illustrations in this manual are for reference only. If you have any questions, please feel free to contact us.We hope that our product can bring you a better cleaning experience.

Product Overview

Names of parts

$ikitbot-S55-Commercial-Cleaning-Robot-Maximize-Your-Cleaning-Potential-fig $1$$

Waste Water Tank
Touch Screen
Clean Water Inlet
Stereo Camera
Sweeper Brush
Ultrasonic Sensors
LiDAR Sensor
Charging Contacts
Line Lasers
Mop Pad
Debris Tray
Scrubber Brush
SIM & TF Card Slot
Maintenance Panel
Emergency Stop
Power Switch

Specifications

1-2 Specifications

MODEL| Commercial Cleaning Robot
DIMENSION| 650mm580mm550mm (LWH)
WEIGHT| 70kg
WORK MODE| Auto planning

Cleaning System

Cleaning Mode

Appearance

WiFi

802.11b/g/n/ac

Movement System

Applicable Floor Type

| Ceramic tile, Marble, Hardwood, PVC, Mixed Floor, Rubber, Low Pile Carpet(,;;;5.5mm)
HEPA Filter| HEPA| H13(99.97%)

Electrical System

Battery

| Rated voltage 25.6V
Runtime: Scrub 4h, Dust Mop Sh

Charger

Path Planing

Cleaning Mode

$ikitbot-S55-Commercial-Cleaning-Robot-Maximize-Your-Cleaning-Potential-fig $3$$

What’s in the Box

$ikitbot-S55-Commercial-Cleaning-Robot-Maximize-Your-Cleaning-Potential-fig $4$$

The accessories included in the package may vary depending on the region and order. Below illustrations are for reference only.

Maintenance

Please make sure to lower the cleaning module before performing maintenance operations.

Mop Pad

Replace the mop pad based on usage. On average, the mop pad needs replacing after every dusting task of 500 square meters of space.

Debris Tray

Debris tray should be cleaned when it’s full. Check the Debris tray on a regular basis.

Please follow the instructions below to install the debris tray.

NOTE: When encountering any clockages during installation, DO NOT push the tray by force, which may lead to permanent damage.

Nylon Roller Brush

Nylon roller brush should be cleaned and maintained on a regular basis.

Microfiber Roller Brush

Microfiber roller brush constantly self cleans when it’s working. It does not need frequent maintenance.

Waste water tank

The waste water tank should be cleaned after every 2-3 hours of continuous cleaning on scrubbing mode .

Safety Warnings

About Safety Warnings

IMPORTANT SAFETY INFORMATION: READ AND UNDERSTAND THESE SAFETY WARNINGS AND ALL INSTRUCTIONS PRIOR TO UNPACKING AND USING THE MACHINE.

Warnings presented here are intended to warn the user of potential harm to the user and other people as well as damage to property. Always adhere to them to reduce the potential for harm. This manual also provides safety warnings, correct handling procedures, and other regulatory information for using the machine, battery, and battery charger. The warnings provided in this manual do not cover all possible situations that may arise. The safety of pedestrians and people in the surroundings will be the first priority in any circumstances (such as when the machine does not operate properly, when the machine has tripped over, etc.). Always adhere to warnings regarding machine installation, maintenance, and use and store this manual where it can always be referred to operators are advised to take normal health and safety precautions suitable for their environment. In the following emergencies, immediately press the emergency stop button and turn off the main power switch.

The machine is in a hazardous state (example: emitting smoke, is inoperable, has fallen over, etc.)
The machine comes close to inflicting harm on surrounding people or things.
The machine is operating (behaving) unpredictably or is operating in a manner that is inconsistent with this manual.

Description of Symbols & Pictorial Indication

The following symbol categories explain the level of harm or damage that can occur if warnings are not observed and the machine or related equipment is used incorrectly. Please be sure you understand these symbols and their correlating meanings before reading the remainder of this manual.

$ikitbot-S55-Commercial-Cleaning-Robot-Maximize-Your-Cleaning-Potential-fig $9$$

Safety Instructions Before Use

The product is a commercial cleaning robot intended for indoor environments. Please read and follow the instructions below carefully.

Warning

Do not use the robot immediately after extreme temperature changes (e.g., moving from a cold outdoor environment to a warm indoor environment).
Do not use the robot in an environment where there are excessive dust, moisture, rain, dirt, or near magnetic fields.
Do not use the robot during thunderstorms or on days with lightning.
Do not use the robot in environments that are flammable, explosive, or near heat sources.

Caution

Avoid exposing the robot to direct sunlight for a long period of time.
Avoid using the robot in places surrounded by glass doors, glass walls, and glass floors.
Avoid using the robot in very narrow spaces (the robot is capable of autonomously avoiding tables and chairs with a height of 0.6-0.Bm).
Avoid using the robot in places with low-hanging objects or decorations (the objects or decorations should be higher than the robot height >500mm).
Avoid using the robot in places where there are loose cables and hoses.
Avoid using the robot in places with stairs, steps, or anywhere with a height difference >5cm.
Avoid using the robot during busy hours.
Avoid running the robot in excessively narrow passages.
Do not start the robot when it is too close to obstacles. Make sure to keep an open space within a radius of 2m for robot movement.
This cleaning robot is suitable for cleaning the following floor types: epoxy flooring, ceramic tiles, marble, and hardwood.
This cleaning robot is not suitable for cleaning the following types of debris: tiny particles and fine dust; debris higher than 2cm; soft hoses or loose wires. Forcibly cleaning these types of debris may damage the robot.

Note

Use and store the robot within the temperature range of 5°C-40°C and the humidity range of5- 85%RH.
Use the robot on smooth and flat surfaces. It is not recommended to use the robot on carpets, soft or uneven surfaces, or outdoors, as it may reduce the robot’s life and cause damage to the robot.
Please be aware of areas with stairs or steps, and refrain from using the robot in these areas to prevent it from falling or dropping.
If the robot is being used in an environment with glass surroundings, it is important to place visible and recognizable safety signs on the ground, positioned 22cm-25cm away from the glass.

Handling the Robot

warning

Do not allow liquid or quasi-liquid substances or any foreign objects to touch the charging terminals or external connection terminals of the robot.
Be careful that dust does not adhere to the LIDAR sensor, camera, or other sensors. Do not cover the robot’s sensors.
When using autonomous cleaning mode, make sure that the operator is able to respond immediately to an alert received from a special app.
Use the robot with its wheels always in contact with the floor. When using the robot in manual cleaning mode, avoid abrupt operation except where unavoidable.
In areas where the robot is inoperable or unmovable due to power not turning on, move the robot to a safer location.
Do not perform any operation not given in this manual.
Do not use the robot with the grounding chain not in contact with the floor. If the grounding chain breaks or comes off, contact customer support.
Recharge the battery for the robot using only the battery charger that came with the robot.
Do not place anything decorative that may hinder the robot’s operation or the emergency stop button.
When replacing the roller brush, mop pad, or emptying the debris tray, please lower the cleaning module before proceeding with the operation.
Before starting the cleaning task, ensure that the HEPA filter is correctly installed to prevent dust contamination and damage to the internal components.
Do not clean the robot with a high-pressure cleaner.
The robot is designed to clean indoor carpets and dry floors. Do not use it for any other purpose.
Do not use the robot to collect hazardous or explosive waste.
Do not block the robot’s vents.
When lifting the robot from the floor, always use two people as a safety precaution.
When the robot is operating, do not let infants, children, and pets come near the robot, or move foot or hand close to the bottom of the robot. Manage so that infants, children, or pets do not touch the robot.
Do not tilt or transport the robot when there is water in the water tank.
Do not apply excessive pressure on the screen or any surface of the robot to avoid causing damage.
Do not drop, fall, compress, bend, poke, cut, microwave, burn, or paint the robot.
Do not move the robot on a slope to prevent it from tripping and causing harm or damage.

Caution

This robot is for indoor use only.
This robot shall be stored indoors only.
For lifting and long-distance transport, the machine must be shut down. Moving or lifting the machine in an emergency stop state may cause it to lose its position. Before restarting the task, use Reposition feature to re-establish the position.
Do not attempt to disassemble the robot. Only authorized professionals are permitted to perform disassembly.
If the cleaning module becomes clogged or entangled with garbage, make sure to perform the cleaning operation under the guidance of a professional. Do not forcefully pull or tug on the cleaning module to avoid any damage.
To ensure the reliability and safety of the product, please use only authorized accessories.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
If the robot has fallen over, press the emergency stop button and then turn off the main power switch on the robot.
Do not insert any objects in the robot.
When using a hose to fill up the clean water tank, please note that the water pressure requirement is 0.05MPa (min.) and 0.8MPa (max.).
Use room temperature water not higher than 60°C for cleaning.
If the robot is not operating normally (unusual sound, odor, smoke, etc.), immediately press the emergency stop button, to stop robot operation, turn off the main power switch, and contact customer support.

FCC Statement

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by IKITBOT (SHENZHEN) TECHNOLOGY CO, LIMITED. may void the FCC authorization to operate this device.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF exposure statement:

The transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a Minimum distance of 20cm between the radiator and any part of your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>