MAULsirius 825 92 LED Floor Lamp Installation Guide
- August 9, 2024
- MAUL
Table of Contents
MAULsirius 825 92 LED Floor Lamp
Specifications:
- Brand: MAUL
- Model: sirius 825 92
- Plug Type: CEE 7/7
- Power Input: 200-240V~ 50/60 Hz 80W
- Cable Length: Approximately 2.50m
- Website: www.maul.de
Product Usage Instructions
Installation:
- Identify a suitable location for the product.
- Ensure the power input matches the specifications of the product.
- Plug the device into a compatible power outlet.
- Secure the product in place to avoid accidental displacement.
Setting up Sensors:
The product includes both Motion and Daylight sensors. Follow these steps to set them up:
- Locate the Dip switch on the device.
- Adjust the Dip switch settings based on your preference for Motion and Daylight sensing.
Replacement Parts:
If you need to replace any parts, refer to the provided Art.-No. codes and visit the manufacturer’s website for ordering.
FAQ
- Q: How can I adjust the Motion and Daylight sensors?
- A: Use the Dip switch located on the device to toggle between different sensor settings.
- Q: What should I do if I need spare parts?
- A: Refer to the Art.-No. codes provided in the manual and order the spare parts from the manufacturer’s website.
Features
Tool
Precaution
What In Box
Installation Instruction
- Press briefly to switch the indirect light on or off.
ON/OFF switch
- Press briefly to switch the entire lamp on or off. (Last setting will be saved.)
- Press briefly to switch the direct light on or off.
Motion Sensor
A Motion Sensor
B Daylight Sensor
- This product contains a light source of energy efficiency class < D > (Art.-No.: 8259209.200A)
- This product contains a light source of energy efficiency class < D > (Art.-No.: 8259209.205A)
Gurantee
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>