djb123 Members Mark Grill Owner’s Manual

djb123 Members Mark Grill Owner’s Manual

ASSEMBLY

CASTERS

4. Turn the emplied cabinet upside down. Insert each caster stem into the four caster holesin each corner of the humidifier botiom. The caslers should fit snugly and be inserted until the stem shoulder reaches the A. cabinet surface. Do not force. A
5. Turn the cabinef right side up.

EVAPORATIVE WICK

6. When placing the wick back into the humidifier, the rod and float assembly must also be reattached. Insert the fop of the float rod through thehole on the extended wick refainer (attached tothe top of the wick frame] (A]. Holding B.
   the float in place, lower the wick and floatassembly together into the cabinet. The wick hasa mounting rib on the top edge which hooks overarib at the inside back of the cabinet. The whitefloat must be positioned into the pockt in the botiom of the cabinet. (B}

AIR CLEANING FILTER  (OPTIONAL)

7. The AirCare filter has four fangs C. that engage into four keyhole slots that mount the AirCare filter onto the outside of the back of he cabinet. [C)

CHASSIS/POWER PACK

8. Place the chassis/power pack unit info the cabinet, so it fits without fipping or rocking.

BOTTLE

9. Fill the botfle with cool, fresh D. (preferably unsoftened) water. if you only have softened waler available in your home, you can use it, but you will nofice a buildup of minerals on the wick much sooner.
   The botile holds 2.5 gallons. When filling, be careful not to pressurize it by overfilling. Bottle damage can result from this. A fill hose is provided with your humidifier which will fit most faucets. Place the water bottle into the left side of the humidifier with the valve cap end down, so

ASSEMBLY CASTERS

4. Torn the emplied cabinet upside down. Insert each caster stem into the four caster holesin each corer of the humidifier botiom. The casters should fit snugly and be inserfeduntil the stem shoulder reaches the A,cabinet surface. Do not force.
   5} Turn the cabinet right side up.

EVAPORATIVE WICK

6} When placing the wick back into the humidifier, the rod and float assembly must also be reattached. Insert the top of the float rod through the
hole on the extended wick retainer [atiached fo the fop of the wick frame] {A). Holding B. the float in place, lower the wick and float assembly together into the cabinet. The wick has
a mounting rib on the fop edge which hooks over
a rib at the inside back of the cabinet. The white float must be positioned into the pocket in the eZbottom of the cabinet. (B)

7) The AirCare filter has four tangs [

that engage info four keyhole slofs that mount the AirCare filter onlo the outside of the back of the cabinet. (C}

CHASSIS/POWER PACK

8. Place the chassis/power pack unit into the cabinet, so it fits without tipping or rocking.

BOTTLE

9. Fill the botlle with cool, fresh D. [preferably unsoftened) water. If you only have
   softened water available in your home, you can use it, but you will nofice a buildup of minerals on the wick much sconer.

The botile holds 2.5 gallons. When filling, be careful net to pressurize it by overfilling. Bottle
damage can result from this. A fill hose is provided with your humidifier which wil fit most faucets. Place the water bottle into  the left side of the humidifier with the valve cap end down, so

Read More About This Manual & Download PDF:

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Members Mark Grill Parts - Select From 133 Models

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>