OTL TECHNOLOGIES PK0859 True Wireless Sound Earpods User Guide

OTL TECHNOLOGIES PK0859 True Wireless Sound Earpods

SAFETY INSTRUCTIONS

• Read all the instructions carefully before using the product and keep them for future reference.
• Do not immerse in water.
• Unsuitable for use by children under the age of 3 due to small parts which may cause choking.
• We recommend that children aged 3-7 are supervised by an adult whilst using the product, prolonged use is not advised.
• The device may become warm while charging.
• Set volume to low before turning on sound.
• Long-term exposure to loud noise may cause damage to eardrums or loss of hearing

PRODUCT OVERVIEW

FIRST TIME USE/PAIR TO NEW DEVICE

Take both earpods out from the charging case, then put them back to the charging case to activate the earpods.
Note: please charge your earpods before first-time use.

PAIR WITH BLUETOOTH DEVICES

Turn Bluetooth function on in the settings of your Bluetooth enabled device.

1.  Take both earpods out from the charging case.
2.  The LED indicator light will flash on one of earpods to detect Bluetooth-enabled devices near you and will enter pairing mode.
3.  “OTL TWS EARPODS” will appear on the Bluetooth device list, select “OTL TWS EARPODS” to establish pairing.
4.  When pairing is successful, the LED on both earpods will flash BLUE.

USE WITH YOUR OTHER DEVICES.

When you want to play audio from another Bluetooth device, disconnect the earpods from the original device and follow steps 1-4 to re-pair the earpods with a new Bluetooth-enabled device

POWER ON
Take both earpods out from the charging case and both earpods will be automatically power on (make sure the charging case is charged).

POWER OFF
Put both earpods back into the charging case, it will automatically power off

CHARGING THE EARPODS
Insert the earpods into the charging case, the LED light will be solid RED when charging. once fully charged, the LED light will be turned off.

CHARGING THE CASE
Please charge your charging case before first time use. Ensure to charge via the provided type C cable. The LED indicator light will be flashing during charging and will turn on solid once it is fully charged. When the battery is low, only the left LED indicator light will flash.

CHANGING EAR TIPS
To remove an ear tip, pull firmly with your fingers at the base of the ear tip. To attach an ear tip, with your fingers at the base of the ear tip, push the ear tip onto the connector until it clicks into place. For more tip sizes, see inside box.

• PLAY / PAUSE
  When listening to music, touch right/left earpod twice to play/pause.

• SKIP TRACK FORWARD/BACKWARD
  Whilst listening to music, press the right earpod for 2 seconds to forward to the next track, or press the left earpod for 2 seconds to go backwards to the previous track.

• VOICE ASSISTANT
  Touch right/left earpod three times to activate voice assistant (i.e. Siri or Google Assistant)

• ANSWER CALL/HANG UP CALL
  Touch the right/left earpod twice to answer the incoming call and touch twice again to hang up.

• REJECT CALL
  Press MF button on right/left earpod for 2 seconds to reject the incoming call.

TROUBLESHOOT

If an error occurs with the earpods, please follow the steps below:

• Take one of the earpods out of the charging case
• The LED light will flash with BLUE and RED quickly, press the MF area for 6 seconds. The RED LED light will go off after 1 second.
• Put the earpod back into the charging case
• Take the other earpod out from the case and follow steps 1-3.
• Take both earpods out from the charging case, search for “OTL TWS EARPODS” from Bluetooth enable device while one of earpod will flash RED and BLUE alternatively.
• When the earpods power is low, the Bluetooth range may be affected. Please charge the earpods to avoid disruption during use.
• Please see our website www.otltechnologies.com for general troubleshooting method instructions.

WARNING

• This product is not a toy.
• Do not disassemble, repair or modify the headphones.
• Keep the headphones dry and do not store the headphones in damp areas to avoid damage to the headphones.
• Avoid dropping the headphones as it may cause damage to the product.
• Do not insert jack plug into electric sockets.

INFORMATION ON DISPOSAL FOR USERS OF WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (PRIVATE HOUSEHOLD)

This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general house hold waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

www.otltechnologies.com | info@otltechnologies.com
Made in PRC
Oceania Trading Ltd/OTL Technologies
2 Dinsmore Road, London SW12 9PS, UK
Hullenbergweg 278-308, 1101 BV Amsterdam, Zuid-oost, NL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>