MAUL 8259309 Led Floor Lamp Colour Vario Sensor Dimmable Installation Guide
- August 10, 2024
- MAUL
Table of Contents
MAUL 8259309 Led Floor Lamp Colour Vario Sensor Dimmable
Specifications
- Brand: MAULsirius
- Model: 825 93
- Plug Type: CEE 7/7
- Voltage: 200-240V
- Frequency: 50/60 Hz
- Power Consumption: 80W
- Cable Length: Approximately 2.50m
Product Usage Instructions
Installation
- Connect the plug to a suitable power outlet.
- Ensure the mains switch is in the OFF position before plugging in.
- Adjust the motion sensor and daylight sensor settings as needed.
Motion Sensor & Daylight Sensor Settings
The device features both a motion sensor and a daylight sensor with adjustable settings. Follow these steps:
- Toggle the dip switch to set the motion sensor and daylight sensor modes.
- Adjust the time settings for the motion sensor activation.
- Configure the daylight sensor mode for optimal performance.
Maintenance
- Clean the sensors periodically to ensure proper functioning.
- Replace any spare parts using the designated Art.-No. codes mentioned in the manual.
FAQ
-
Q: How do I adjust the motion sensor settings?
A: Toggle the dip switch to set the desired motion sensor mode and adjust the time settings accordingly. -
Q: What should I do if the light source needs replacement?
A: Refer to the spare parts list in the manual and use the corresponding Art.-No. for replacement.
INSTRUCTION
FEATURES
PARTS
INSTALLATION
- Press briefly to switch the indirect light on or off.
- Press briefly to switch the entire lamp on or off. (Last setting will be saved.)
- Press briefly to switch the direct light on or off.
Motion Sensor & Tageslicht-Sensor
Motion Sensor
Daylight Sensor
Spare parts
This product contains a light source of energy efficiency class < F >
(Art.-No.: 8259209.200)
This product contains a light source of energy efficiency class < E >
(Art.-No.: 8259209.205
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>