Our Little Laser Stainless Steel Cup Bottle Tumbler Instructions
- August 8, 2024
- Our Little Laser
Table of Contents
Our Little Laser Stainless Steel Cup Bottle Tumbler
Product Information
Specifications
- Material: Stainless steel
- Features: Tumbler with lid
- Handle: Attached to the tumbler
Product Usage Instructions
To ensure the longevity of your tumbler and prevent damage to the handle attachment tabs, follow these guidelines:
- Do not use the tumbler handle as leverage when removing or tightening the lid.
- The tumbler handle is intended for holding while carrying and drinking, not for lid removal or tightening.
- Proper lid removal and tightening involves securing your hand on both the lid and body of the tumbler to loosen or tighten it.
FAQ
- Q: Can I use the handle to remove or tighten the lid?
- A: No, using the tumbler handle as leverage for lid removal or tightening can damage the handle attachment tabs welded to the stainless steel tumbler. Always secure your hand on both the lid and body of the tumbler for proper removal and tightening.
Proper Lid Removal and Tightening
Improper loosening or tightening will result in damaging the handle attachment
tabs welded to the stainless steel tumbler.
- When removing or tightening your lid do not under any circumstances use the tumbler handle as leverage.
- The tumbler hands is designed specifically for holding while carrying and drinking.
- Proper lid removal and tightening would be to secure your hand on the lid and body of the tumbler to loosen or tighten.
Regarding container cleaning
- Please choose the correct method for cleaning or hand washing.
- Do not use wire brushes or polishing agents for cleaning.
- Dishwashers are not recommended unless explicitly stated.
- If you want to better preserve the coating or pattern on the product, it is recommended to hand wash.
- Do not use bleach or bromide for cleaning as this may damage product performance and reduce product performance.
- To remove stubborn stains, soak them in warm water and soda powder solution overnight.
- During the soaking process, remove the outer cover and accumulate external force on one side.
- Please use a mild detergent or warm water.
- Please use a soft damp cloth or a non-frosted sponge to clean and dry.
304 stainless steel (06C19Ni10) material will not have concerns about rusting
under normal use, but it may still cause rusting due to differences in usage,
storage conditions, and environmental conditions.
For example, surface rust spots caused by iron ore in water are not a problem
with the stainless steel material itself and can be removed after careful
cleaning.
If there are brown spots inside the cup, which are mineral (or coffee grounds)
adhering to the surface in water, they can be removed by careful cleaning
Warning
- Before use, it is necessary to clean.
- It is not recommended to fill liquids exceeding 100 °C (212 °F).
- High-temperature liquids should not be overfilled, and should not be higher than 0.25 inches (7mm) above the bottom of the thread.
- Overfilling may cause overflow and burns.
- Do not let children come into contact with hot liquids, as they may cause burns.
- To prevent spillage, please ensure proper assembly and fully tighten the cover before use.
- Be careful to avoid hot liquid spillage, otherwise it may cause burns. If you have purchased our product, please be careful when drinking hot liquids.
- This product adopts a high-flow design, and drinking hot liquid too quickly may cause burns.
The product design does not have any process or material defects.
If accidents and damaged component failures occur due to unauthorized
modifications or improper use, the user shall bear the consequences
themselves.
Notes
- When cleaning, do not use a dishwasher or other cleaning tools, unless otherwise specified.
- Do not use steel wire balls or other chemical solutions (with strong corrosiveness) to scrub.
- Do not place the insulation container close to heat sources such as the stove to avoid plastic parts being deformed by heat.
- Please handle it with care and do not invert, squeeze, or impact it to avoid deformation and depression of the container and reduce insulation performance.
- When placing ice cubes, do not force large ice cubes that exceed the size of the container mouth into the container.
- Please do not keep tea, fruit juice, and dairy products in the container for a long time (more than 1 day) to prevent spoilage and odor.
- Please regularly check the container and components for cracks or wear, and replace them on time. At the same time, avoid hot liquid leakage and scald the human body.
- When transferring hot water, do not exceed the bottom of the container lid to prevent hot liquid from overflowing and scalding the human body When filling hot liquids, do not let children approach to avoid burns.
- Do not pack carbonated beverages Avoid liquid spraying with carbonated gas when opening the container, which can contaminate clothing.
- Do not use heating equipment such as microwaves to heat the product Storage method: It is recommended to store in a dry environment to maintain color and luster
Best Instructions for Use
- Pour in hot or cold water for preheating or pre-cooling, leave it uncovered for 5 minutes, pour out the water, and then immediately pour in your favorite hot or cold drink to enhance insulation and cooling performance.
CONTACT
- Manufacturer: Zhejiang Shuixi Industry and Trading Co., Ltd
- Manufacturer Address: No. 46 Mudan South Road, Baiyang Street, Wuyi County, Jinhua City, Zhejiang Province, China
- Product Name: Stainless Steel Cup/Bottle/Tumbler/Mug/Cooler
Read User Manual Online (PDF format)
Loading......