SINED DOCCIA-PULA-PARETE-NERA Wall Outdoor Shower Instruction Manual

OPERATION AND MAINTENANCE MANUAL

MODELS
DOCCIA-PULA-PARETE-INOX
DOCCIA-PULA-PARETE-NERA

DOCCIA-PULA-PARETE-NERA Wall Outdoor Shower

Make sure cold & hot water pipes installed at 1050mm height. Flush the pipes before installation.
Make sure the middle distance btw the two pipes are 150mm,and allow 5mm adjustment.

Measure the depth of the inner thread of cold & hot water pipes and mark it.
This is to have NO gap left btw the wall and brass connector.
Cut the extra length of the outer thread of the brass connector at marked length.

Then tighten the two brass connectors to the cold & hot water pipes.

Insert upper part to upper holder, lower parts to the two brass connectors, then tighten the screws. Connect the seperate shower head if have, and instal handshower and hose to hose inlet, then all installations are done.

INSTALLATION

1. Make sure cold & hot water pipes installed at 1050mm height. Flush the pipes before installation. Make sure the middle distance btw the two pipes are 150mm, and allow 5mm adjustment.
2. Measure the depth of the inner thread of cold & hot water pipes and mark it. This is to have NO gap left btw the wall and brass connector. Cut the extra length of the outer thread of the brass connector at marked length.
3. Then tighten the two brass connectors to the cold & hot water pipes.
4. The height of the shower can be adjusted. Measure the distance and adjust.
5. Insert upper parts to bottom part, match back lines on to pipes together to be one rectangular and lock screw in back pipes. Insert upper part to upper holder, lower parts to the two brass connectors, the tighten the screws. Connect the seperate shower head if have, and instal handshower and hose to hose inlet, then all installations are done.

OPERATION AND MAINTENANCE

WARNINGS
Please read the instructions carefully before installing and using the shower.
This manual contains important information for the proper use and maintenance of your shower and should be kept for future reference.
Content

The package contains

• Shower with mixer and overhead shower as well as additional accessories (e.g. foot wash basin, hand shower, etc.) depending on the model purchased
• Installation kit complete with screws
• Use and Maintenance Manual

1. Installation
   The installation must be carried out by specialized personnel on a solid support, perfectly flat and level, able to support the weight of the shower and prevent it from falling.
   The installation procedure is explained in detail in the attached sheet which is an integral part of this manual.

2. Use
   Showers are particularly sensitive to impurities and limescale and, if installed outdoors, to low temperatures during the winter period.
   • It is recommended to purge the system before connecting the water pipes to prevent dirt and impurities from getting into the shower and causing malfunctions.
   • To avoid the formation of limescale, it is strongly recommended to install a special filter at the water inlet and to periodically clean the shower, the nozzles and the shower head.
   • Before the winter period or in case of prolonged non-use, it is recommended to close the water supply and empty the shower completely.
   It is also advisable to dismantle the shower and store it during the winter period or to protect it with suitable covers.

3. Cleaning
   • To prevent limescale stains from forming on the outside of the shower, simply clean it with a damp cloth and soap, rinse it and dry it.
   • Do not use aggressive or abrasive cleaners or those containing alcohol, hydrochloric acid or phosphoric acid.

4. Warranty
   SINED showers have a 2-year warranty from the date of purchase against defects in materials and workmanship.
   • The warranty does not cover components subject to wear and tear, including mixers, shower heads, taps, etc.
   • The warranty does not cover damage due to incorrect assembly, improper use and incorrect maintenance (e.g. use of inappropriate cleaning agents).
   • Damage resulting from the use of non-original spare parts is not covered by the warranty.
   • The warranty does not cover any damage resulting from work not carried out by specialised technicians.
   • Damage due to frost, limescale or other impurities inside the shower is not covered by the warranty.

In the presence of problems covered by the warranty, the product must be returned to the seller.

• The product must be carefully packed and complete with all its parts and accessories;
• The reason for the return must be described in detail and proof of purchase (invoice or receipt) must be provided;
• Return shipping costs are the responsibility of the buyer;
• The returned product will be checked by the seller and repaired or replaced at the sole discretion of the seller.

Made in China Importato in Italia da M.P.C. srl Via Tortona 21 Milano 20144 Italia
Tel +39 02 21117815 / e-mail info@sineditalia.com / sito web www.sineditalia.com
Il marchio SINED e il logo SINED sono registrati da SINED VENTAS ONLINE S.L.U. EUTM 018196373

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>