MOGEMYTH MG0101,MG0101B Fighter Gaming Remote Control User Manual

MOGEMYTH MG0101, MG0101B Fighter Gaming Remote Control

Product Information

Specifications:

• Suitable Platforms:
  • Nintendo Switch host platform
  • PC Windows XP or higher system version
  • Android 6.0 or higher version
  • iOS – iPhone 6 or above, iOS 13 or higher version
• Wireless Connection: Bluetooth 4.0 BLE
• Effective Distance: About 8 meters
• Battery Capacity: 600 mAh
• Charging Time: About 3 hours
• Playtime: About 12 hours
• Voltage & Current: Voltage – 3.7-4.2V; Current – 30 mA
• Working Temperature: 20-80%

Product Usage Instructions

Common Operations:

• Power On: Short press the Power button.
• Power Off: Long press the Power button for 10 seconds.
• Reset  Long press the Reset button for 5 seconds.
• Standby: Auto hibernate when idle for more than 15 minutes; long press SEL/-+ST/+ +A for 3 seconds to cancel.
• Insufficient Power: The indicator flashes when the battery is less than 20%; auto power is off when the battery is less than 5%.

Battery Charging:

• Charging Method: Connect to a power adapter or computer using the data cable for charging.
• Battery Charging Status:
  • Not connected: 4 indicators flashing slowly simultaneously.
  • Data cable connection: The indicator for the current connection status flashes slowly.
  • Battery Full:
  • Not connected: All 4 indicators are off.
  • Data cable connection: Indicator for current connection status lights on.

Wireless Connection:

Bluetooth Connection:

• PC (with Bluetooth):
  • Matching Method: In the off state, long press the right directional button for 3 seconds until the indicator flashes fast. Follow on-screen instructions for successful matching.
  • Mode Switching: When wired to the PC, long press for 5 seconds to switch between X-input/D-input/Switch modes.

Switch Host Connection:

1. Matching Method: Open the switch post, then a long press + the left direction button for 3 seconds to enter the matching status.
2. Connecting Back Method: Press the controller button to connect with the host automatically.

FAQ:

• Q: How do I know if the battery is fully charged?
  A: When not connected, all 4 indicators will be off. When connected via data cable, the indicator for the current connection status will light up.

• Q: What platforms are compatible with the product?
  A: The product is compatible with the Nintendo Switch host platform, PC Windows XP or higher, Android 6.0 or higher, and iOS devices with iOS 13 or higher versions.

Packing List

• MOGEMYTH FIGHTER (MG0101/B) 1Pcs
• Data Cable 1Pcs
• User Manual(including warranty card) 1Pcs

Product Appearance

Features

iOS

| IPhone 6 or above, iOS 13 or higher version. (Please consult customer service or the official website for details and instructions.)
Wireless Connection| Bluetooth 4.0 BLE
Effective distance| About 8 meters
Product dimensions| 15010360mm
Product weight| 210±5g
Battery information| Capacity 600 mAh, charging time about 3 hours,

charging voltage 5V,charging current:≤500mA

Playtime| About 12 hours
Voltage &Current| Voltage:3.7-4.2V;Current:＜30  mA
Working temperature| 0-40°C
Working humidity| 20-80%

Common Operations

Standby

| Auto hibernate when idle for more than 15 minutes; long press SEL/-+ST/+ +A for 3 seconds will be cancelable

Insufficient power

| Indicator flash apace when battery less than 20%, auto power off when battery less than 5%
Charging method| Connect to the power adapter or computer with the data cable for charging
Battery charging| Not connected: 4 indicators flashing slowly at the same time
Data cable connection: the indicator for the current connection status flashes slowly

Battery full

| Not connected: All 4 indicators are off
Data cable connection: the indicator for the current connection status light on

Wireless connection

Bluetooth connection

PC(with Bluetooth)

Matching method

1. In the off state, long press the right directional button for 3 seconds until the 1, and 4 indicators flash fastly, and then the controller enters the matching mode
2. In Windows, open Settings – Bluetooth and other devices – Add device – Search for matching
3. Select “Xbox Wireless Controller” among the searched Bluetooth devices, after successful matching, the 1、4 indicator will be always on and vibrate a bit, and it will automatically enter the Xinput mode. If not, it will enter the hibernation after 1 minute.

Mode switching
When wired to the PC, a long press M/ for 5 seconds, can switch among X-input/D-input/Switch modes (The default mode for connecting to PC is X-input)

Switch host

Matching method

1. Open the switch post, then click ‘Change grip/order’.
2. Long press + the left direction button for 3 seconds to enter matching status, 4 Indicator flash cyclically and enter searching status.
3. 1 or multiple indicators are always on, and the controller vibrates once, indicating matching successfully. If not, it will enter the hibernation after 1 minute.

Connecting back method

1. The host is on, press 1 second to turn on the controller, it will be connected with the host automatically, and the corresponding indicator will be always on.
2. The host is hibernated (not in flight mode), press men for 1 a second to wake up it, and the controller will be connected with the host automatically.

Android devices

Matching method

1. Press the down direction button and at the same time, enter matching mode directly, indicator 2.3 flashes fast.
2. Open the Bluetooth to find ‘MOGEMYTH0101’ from the Android devices and click connection.
3. The Indicator 2 is always on, and the controller vibrates once, indicating successful matching. If not, it will enter hibernation after 1 minute.

Conneting back method

1. Short press for 1 a second, find ‘MOGEMYTH0101’ from the Bluetooth List, then click and connect.
2. lf the connection is successful, the device displays “Connected”, the controller indicator 2 is always on, and the controller vibrates once, indicating that the connection is successful. lf not, the device will enter hibernation after 1 minute. (Note: Only supports games that natively support gamepad)

IOS devices

Matching method

1. Press the up direction button and at the same time, enter bluetooth matching mode, indicator 1.3 flashes fast.
2. Open the IOS to search for the bluetooth device named ‘Xbox Wireless Controller’.
3. Indicator 1.3 is always on, and the controller vibrates once, indicating successful matching. If not, it will enter hibernation after 1 minute.

Conneting back method

1. Find ‘Xbox Wireless Controller’ from the Bluetooth list, then click and connect (only supports versions above iOS 13).
2. If the connection is successful, the mobile phone displays ‘Conneted’, the indicator 1.3 is always on, and the controller vibrates once, indicating that the connection is successful. if not, it will enter hibernation after 1 minute.

Wired connection

PC

1. Connect the controller to the computer with a USB cable, it will automatically enter the Xinput mode (default), and the indicator 1.4 of the controller will be flashing.
2. Long press M/ for 5 seconds to enter the Dinput mode, the indicator 2.3 of the controller will flash and vibrate once to indicate the successful switching.
3. Long press M/ for 5 seconds to enter the Switch Pro mode, the indicator 1.2.3 of the controller will flash and vibrate once to indicate the successful switching.

Switch host

1. In the system settings of the switch host, turn on the communication function for the Pro wired controller.
2. Put the switch host into the base and fix it, the host base is connected to the display device.
3. When the controller is turned off, use the USB cable to connect it to the port on the side of the base of the host, the controller will connect to the switch host automatically. After the connection is successful, the corresponding indicator is always on, and the controller vibrates once to prompt a successful connection!

Button Switching Functions

ABYX is an X-box button layout by default. In PC, long press M/ + for 3 seconds to switch to the Switch button layout. In Switch mode, ABYX is the same as the Switch layout by default. There will be a vibration prompt when the ABYX button switches.

Continuous action

1. The keys for setting the continuous action function are A/B/X/Y/LT/LB/L3/RT/RB/R3
2. Three speed levels of continuous action are: 5 times/s,10 times/s, and 20 times/s in turn; The default setting is 10 times/s and the setting will be saved.
3. Continuous action setting

Manual continuous action| +Function keys| The first time to press the + function button, indicator 1 flashes in synchronization with the speed of continuous action
---|---|---
Automatic continuous action| +Function keys| The second time to press the + function button, indicator 2 flashes in synchronization with the speed of continuous action Press the button alone to suspend continuous action
Clear continuous action| +Function keys| The third time to press the + function button, the continuous action function is canceled and the indicator is turned off
Clear all continuous action| Press and hold for 10’s| The controller vibrates and prompts. At this time, the continuous action function of all keys is cleared
Continuous action speed setting| +left joystick up or down| Up is to increase speed, Down is to reduce speed, 2 level by default. When the indicator 2 flashes once, it indicates the 1st level. If it flashes 3 times, it indicates the 3rd level

Vibration adjustment

1. Press the + up and down direction buttons at the same time to adjust the vibration strength (The up key is strengthened, Down is weakened). It will vibrate once to indicate when being adjusted
2. The motor vibration has 4 levels, which circulate in turn from low to high (factory setting is 2nd 70%)
   • 0 level: 0% vibration(turn off vibration)
   • First level: 30% vibration
   • 2nd level: 70% vibration 3rd,100% vibration
3. Vibration adjustment is effective in connected PC and Switch hosts. The setting will be saved.

Joystick sensitivity adjustment

Level settings| 1st level reference value 19276. 2nd level reference value 25699. 3rd level reference value 32767
---|---
level tips| 1st: Indicator 4 flashes 3 times;

2nd: Indicator 2.3 flashes 3 times 3rd: Indicator 1.2.3 flashes three times

Default level| 3rd level, reference value 32767
Left joystick adjustment| +left stick to the left direction is decreased joystick sensitivity

+left stick to the right direction is increased joystick sensitivity

Right joystick adjustment| +right stick to the left direction is decreased joystick sensitivity

+right stick to the right direction increased joystick sensitivity

Somatosensory Adjustment

Without connection, put the controller flatwise and press SEL/- +A + for 3 seconds, at this time the menu button indicator will flash; Then press the ST/+ button, after 2 seconds the indicator of the controller turns off, and the adjustment is successful and automatically exit the adjustment mode. (Note: the gamepad can’t be moved during adjustment)

Reset

When the controller is in disorder of function, crashes, or other abnormalities, please long press 10 seconds to restart the controller.

Notice

Warranty card

If you have any questions or need help, please log in to the official website of Mogemyth Technology: www.mogemyth.com to connect with us.

FCC STATEMENT

§ 15.19 Labelling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

§ 15.21 Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

§ 15.105 Information to the user.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable devices:

• The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
• According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels more than the Commission’s guidelines.

According to KDB 447498 (2)(a)(i)

Shenzhen Mogemyth Technology Co., Ltd. http://www.mogemyth.com.

References

• prompts.at is available for purchase - Sedo.com
• 【魔阁官网】游戏外设潮酷品牌

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>