Electric-Collars Reedog EasyFlap Mini Brown Pet Door Owner’s Manual
- August 6, 2024
- Electric-Collars
Table of Contents
Electric-Collars Reedog EasyFlap Mini Brown Pet Door
Product Specifications
- Installation: Doors for dogs and cats
- Compatibility: Suitable for small to medium-sized pets
- Adjustability: Tunnel width can be customized
- Certification: CE mark for use in EU countries
Product Usage Instructions
- Measurement:
- Measure the height of your dog/cat to ensure the door bottom aligns with the beginning of their chest.
- Attachment:
- Attach the front side of the door to the desired location. Outline the opening from the outside.
- Cutting:
- Cut the opening according to the provided template.
- Insertion:
- Insert the front and back parts of the door into the opening.
- Adjustment:
- If needed, adjust the width of the tunnel using the marked lines.
- Assembly:
- Connect the two parts using the included screws and add the blanking plugs for a finished look.
FAQ
- Q: Is this product suitable for large dogs?
- A: This product is recommended for small to medium-sized pets due to its size limitations.
- Q: Can the tunnel width be extended?
- A: Yes, the tunnel width can be adjusted by following the marked lines for customization.
Prepare
- Electric or manual saw
- Phillips screwdriver
- Drill
- Ruler and pencil
- Spirit level
- Door with installation material
- Measure the height of the dog/cat (the bottom of the door should extend to the beginning of the chest)
- Attach the front side to the place where you want to place the doorn of the door and outline the opening from the outside
- Cut the opening according to the drawing
- Insert the front and back of the door
- If necessary, you can adjust the width of the tunnel using the marked lines
- Connect the two parts with the included screws and put on the blanking plugs
The device has been approved for use in EU countries and is therefore provided with the CE mark. All necessary documentation is available on the website: www.electric-collars.com Changes to technical parameters, properties, and printing errors are reserved.
Service center and distribution
- Reedog, sro
- Sedmidomky 459/8 101
- 00 Prague 10
- Phone: +1 646 980 4569
- Email: info@electric-collars.eu
“`
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>