Electric-Collars RS1 Reedog Transmitter User Manual
- June 9, 2024
- Electric-Collars
Table of Contents
RS1 Reedog Transmitter
Switch the channel by pressing the On/O (Channel) Button. This product can train up to 2 dogs.
Please use a charger with a 5V output voltage that can always be seen on the surface of it. If charged with a charger with an output voltage over 5V, the Receiver will deliver a rapid warning tone and stop charging automatically, and the Remote Transmitter will stop charging automatically with the colorful indicator rapidly blinking in red.
When pressing the Shock Button, the red indicator lights rapidly flow from both ends and meet in the middle, and the Receiver will deliver a static shock. It will cut off automatically if you press and hold the Shock Button for 10 seconds. There is a total of 99 levels of Shock for training which you can adjust by the Adjustment Button.
1.Press and hold the Power Button on the Receiver for 2 seconds and the On/Off (Channel) Button to turn both of the Receiver and the Remote Transmitter on.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmfulinterference to radio communications. However,
there is no guarantee that interference will not occur in a specific
installation. If interference does occur to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and the Receiver. Connect the equipment to an outlet on a
circuit different from that to which the receiver is connected. Consult
customer care, the dealer, or an experienced radio/TV technician for help.
Model: RS1 Made in China Version: V3.0