Husqvarna DC 600P 10 cu ft Poly Swivel Dump Cart Instruction Manual
- August 6, 2024
- Husqvarna
Table of Contents
Husqvarna DC 600P 10 cu ft Poly Swivel Dump Cart
Product Specifications
- Model: DC 600P
- Article Number: 584 40 19-03
- Capacity: 10 cu ft
- Type: Poly Swivel Dump Cart
- Patents: U.S. Patent No. 8,496,298; 9,056,573; 9,242,588
Product Usage Instructions
- Attach Undercarriage (2) to Poly Body (1) and tighten with hardware as shown.
- Attach Front Support (6) loosely to Poly Body (1) as shown. Do not tighten the hardware at this time.
- Insert Axle (7) into Undercarriage (2) halfway. Center Spacer (23) inside Swivel Clevis and align with Axle (7).
- Slide the Axle completely through the Undercarriage (2); the Swivel Clevis and Spacer (23) must be captured by the Axle (7). Align the Drawbar with Front Support (6) and press down to latch. Tighten the bolts on the Front Support after latching to the Drawbar.
- Slide Washers (24) and Wheels (26) onto the Axle and secure with Hairpins (25) as shown.
- Ensure all fasteners are tightened and verify tire pressure before use.
- Attach the Dump Cart to your tractor using a spring-loaded hitch pin.
- Do not exceed 600 pounds when loading material into the cart body.
- Distribute the weight of the load as evenly as possible in the cart body for best handling.
- When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity.
- Do not exceed 6 miles per hour when towing the Dump Cart.
- Step down on the foot pedal to release the latch mechanism.
- Lift the body and swivel as desired to guide the material to the preferred location.
- Lift the body entirely and empty the material.
- Lower the body guide the latch into the drawbar and relatch.
FAQ
- Q: What should I do if I am missing parts?
- A: If you are missing parts, do not return to the store. Email cs@ohiosteel.com or call 1-800-652-2321, ext. 212 for assistance. Before contacting customer service, please describe the issue, photos of the problem from different angles, and a short video if applicable. Replacement parts are available online at ohiosteel.com/parts-store as a repair kit.
Safety Rules
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
- Read and understand all safety rules and operating instructions before using this tractor attachment.
- Follow all safety rules and operating instructions provided by your vehicle’s manufacturer when using attachments.
- Never allow children or untrained persons to operate a vehicle or attachment.
- Do not exceed the vehicle manufacturer’s towed weight limit.
- Reduce vehicle speed and allow extra stopping distance when towing heavy loads.
- Reduce vehicle speed and towed weight when operating on slopes.
- Operate up and down slopes, never across the face of slopes.
- Do not carry passengers on the vehicle or attachment.
- Avoid sudden turns or maneuvers.
- Do not tow attachments on public roadways.
- Do not remove warning decals from the product.
- Check the product for worn, loose, or damaged parts before each use. If any damage is present, repair the product before using it.
- Check the product for loose or missing fasteners before each use. Tighten or replace fasteners as needed before using.
- Do not exceed the vehicle speed of 6 miles per hour when towing the Dump Cart.
- Do not exceed the Dump Cart rated weight capacity of 600 pounds.
Warranty
- IF YOU ARE MISSING PARTS DO NOT RETURN TO THE STORE Email cs@ohiosteel.com or call 1-800-652-2321, ext. 212
- Before you call, please email our customer service team at cs@ohiosteel.com with the following
- A description of the issue you are experiencing.
- Photos of the issue that include an overall view and detailed view from multiple angles.
- If applicable, a short video showing the issue.
Replacement Parts
You can place your parts order online at ohiosteel.com/parts-store
- You can also reach our Customer Service Department at 1-800-652-2321, ext. 212
- If you are ordering replacement part(s) for your product, please note that some parts are only available as a repair kit.
If this product fails due to a defect in material or workmanship within THREE YEARS from the date of purchase, we will at our option, only with receipt of purchase, repair or replace it free of charge. This warranty excludes tires, bushings, and bearings which are expendable and become worn during normal use.
This warranty does not cover:
- Repairs are necessary because of operator abuse or negligence.
- Equipment used for commercial or rental purposes.
- Paint that is worn or faded due to normal use or exposure.
To arrange for product repair visit ohiosteel.com/customer-
support and fill out the warranty
repair form. You can also call
1-800-652-2321, ext. 212 to speak to
our Customer Service Team.
This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to state. This warranty applies only while
this product is in use in the United States.
Carton Contents
TOOLS REQUIRED FOR ASSEMBLY
- 1/2″ Wrench or Socket
- Large Flat Screwdriver
Assembly Instructions
- Attach Undercarriage (2) to Poly Body (1) and tighten with hardware as shown.
- Attach Front Support (6) loosely to Poly Body (1) as shown.
- Insert Axle (7) into Undercarriage (2) halfway as shown. Center Spacer (23) inside Swivel Clevis and align with Axle (7). Discard any additional spacers provided in hardware pack.
- Slide Axle completely through the Undercarriage (2); Swivel Clevis and Spacer (23) must be captured by Axle (7). Align Drawbar with Front Support (6) and press down to latch.
- Slide Washers (24) and Wheels (26) onto Axle and secure with Hairpins (25) as shown.
- Ensure all fasteners are tightened and verify tire pressure before use.
Operating Instructions
Before Using Dump Cart:
- Check tire pressure and inflate to 30 psi if needed.
- Read all Safety Rules found on page 1.
How to Use Dump Cart:
- Attach the Dump Cart to your tractor using a spring-loaded hitch pin.
- Do not exceed 600 pounds when loading material into the cart body.
- Distribute the weight of the load as evenly as possible in the cart body for best handling.
- When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity.
- Do not exceed 6 miles per hour when towing the Dump Cart.
How to Empty Dump Cart:
- Step down on the foot pedal to release the latch mechanism.
- Lift the body and swivel as desired to guide the material to the preferred location.
- Lift the body entirely and empty the material.
- Lower the body guide the latch into the drawbar and relatch.
Periodic Maintenance:
- Tighten fasteners as needed before each use.
- Check tire pressure before each use.
Repair Parts
ITEM| PART NO| DESCRIPTION| QTY| ITEM| PART NO|
DESCRIPTION| QTY
---|---|---|---|---|---|---|---
1| 6000667| BODY, POLY,
3040PS| 1| 15|
| HEX BOLT, 3/8-16 X 3/4″ (BLACK)| 1
2| 6000681-O1| UNDERCARRIAGE, (HQ ORANGE)| 1| 16| HEX BOLT, 3/8-16 X 3″ (BLACK)| 1
3|
| PAN HEAD, 5/16-18 X 3/4″ (BLACK)| 12| 17| HEX BOLT, 3/8-16 X 3-1/2″ (BLACK)|
2
4| WASHER, 5/16″ USS (BLACK)| 12| 18| WASHER, 3/8″ USS (BLACK)| 1
5| SPINNER-GRIP NUT, 5/16-18 (BLACK)| 12| 19| HEX NUT, 3/8-16 C-LOCK (BLACK)|
5
6| 6002364-O1| SUPPORT, FRONT, 3040PS (HQ ORANGE)| 1| 20| SHOULDER BOLT, 1/2″ X
3/8″| 1
7| 300008| AXLE, 3/4″ X
28.500″| 1| 21| WASHER, 1/2″ USS (ZINC)| 1
8|
| DRAWBAR, SD (ORANGE)| 1| 22| SPRING WASHER| 1
9| PIN, HITCH, SPRING-LOADED (BLACK)| 1| 23|
| SPACER, 1″ X 3.125″| 1
10| FOOT PEDAL (HQ SILVER)| 1| 24| WASHER, 3/4″ SAE (ZINC)| 4
11| CLEVIS, SWIVEL, 3/4″ (BLACK)| 1| 25| CTTR. HAIRPIN, 3/32″ X 2-5/16″
(ZINC)| 2
12| LATCH, SWIVEL DUMP (Y. ZINC)| 1| 26|
6002392| WHEEL,
4.00-6 X 3/4″ (SILVER)| 2
13| SPRING, LATCH, 4-3/4″| 2| 27| KIT
6000812|
REPLACEMENT BUSHINGS (SET OF 4)| –
14| BUSHING, FOOT PEDAL| 2
CONTACT
- Manufactured in the U.S.A. from domestic and imported components
- Email cs@ohiosteel.com or call 1-800-652-2321, ext. 212
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>