allen plus roth 42490 Wall Lantern Farol De Pared User Guide
- August 6, 2024
- allen plus roth
Table of Contents
allen plus roth 42490 Wall Lantern Farol De Pared User Guide
Questions, problems or missing parts?
Before returning contact us at:
866-439-9800 , 8 a.m. – 8 p.m.,
EST, Monday – Sunday or ascs@lowes.com.
Thank you for purchasing this ALLEN + ROTH product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Installing a fixture into an electrical system not having a proper grounding means for grounding could allow all metal parts of the fixture to carry electrical current if any of the fixtures wires, wire connections or splices become broken, cut, or loose. Anyone coming in contact with the fixture is subject to electrical shock, which could cause serious injury or death.
- Wire connectors will not support the weight of this fixture. Suspending this fixture by the supply wires and wire connectors will result in the fixture falling, with the possibility of personal/injury and the danger of electrical shock or fire.
CAUTION
- Do not use bulbs having a wattage greater than the maximum value stated on the fixture. The use of a higher wattage lamp(s) than specified will increase temperatures and may cause risk of fire.
- Make sure that all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with installing electrical wiring.
- Turn off electricity at main fuse box (or circuit breaker box) before beginning installation.
CARE AND MAINTENANCE
Shut off the main power supply before you begin any maintenance tasks. Periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents and do not spray liquid cleaner directly onto the bulb or wiring.
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit www.lowes.com for more information.
SAFETY INFORMATION
CAUTION
- All fixtures must be mounted to an outlet box that is supported by the building structure. Do not attempt to support the fixture by drywall alone. The fixture may fall and cause personal injury,
- Do not connect the fixure’s ground wire (green or bare) to the black (hot) current carrying or white (neutral) supply wire from the outlet box.
- Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
WARRANTY
The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The manufacturer will, at its option, repair, replace or refund the purchase price to the consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. This warranty gives you specific rights and you may also have other rights which may vary from state to state.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 35 minutes
TOOLS REQUIRED (NOT INCLUDED):
HELPFUL TOOLS (NOT INCLUDED):
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Turn OFF the electrical power at the main fuse or circuit breaker.
Note: The position of the screws (RR) will determine the orientation of the fixture (A).
Note: Use center screw to ensure mounting screws (D) are aligned exactly perpendicular to the horizon since they will determine the orientation of the fixture (A).
Loosen the ground screw on the mounting bracket (B) and wrap the bare wire from the fixture (A) around the ground screw. Tighten the ground screw to hold the bare wire in place.
Connect black wire from the fixture (A) to black (hot) supply wire. Connect white wire from the fixture (A) to white (neutral) supply wire. Connect the bare wire from the fixture (A) to bare/green (ground) wire. If supply wire colors differ from these, contact a professional electrician to determine proper wiring.
Use 60 W max. medium-base incandescent bulbs or CFL equivalent.
Silicone sealant not included.
Photo sensor automatically turns light on at dusk and off at dawn.
Restore the power at the main fuse or circuit breaker.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>