Husqvarna LS 50 Lawn Sweeper Instruction Manual

: August 6, 2024
: Husqvarna

Table of Contents

Husqvarna LS 50 Lawn Sweeper
Product Specifications
Product Usage Instructions
Carton Contents
Assembly Instructions
Operating Instructions
Repair Parts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Husqvarna LS 50 Lawn Sweeper

Product Specifications

Model: LS 50
Article Number: 584 40 18-01
Capacity: 26 cu ft
Type: Lawn Sweeper
Patent: U.S. Patent No. 7,610,646

Product Usage Instructions

Safety Rules

Read and follow all safety rules and operating instructions before using this equipment.

Warranty Information

If you are missing parts, do not return to the store. Contact customer service at cs@ohiosteel.com or call 1-800-652-2321, ext.
212. Before contacting, email the customer service team with a description of the issue, photos, and if applicable, a video.

Replacement Parts: Order online at ohiosteel.com/partsstore

Carton Contents
Refer to the list of carton contents to ensure all parts are included.

Assembly Instructions

Step 1: Attach Hitch Mount Tubes
Attach Hitch Mount Tubes (19) to Sweeper Assembly and tighten hardware. Do not overtighten.

Step 2: Attach Handle
Attach Handle (3) to Height Adjustment (2) and tighten hardware.

Frequently Asked Questions (FAQ)

Q: What should I do if some parts are missing?
A: Contact customer service at cs@ohiosteel.com or call 1-800-652-2321, ext. 212 for assistance on missing parts.

Q: How can I order replacement parts?
A: You can order replacement parts online at ohiosteel.com/partsstore.

Article 584 40 18-01

READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT

Safety Rules

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Read and understand all safety rules and operating instructions before using this tractor attachment.
Follow all safety rules and operating instructions provided by your tractor’s manufacturer when using attachment.
Never allow children or untrained persons to operate tractor or attachment. Reduce tractor speed to slowest setting when towing or operating on slopes. Operate up and down slopes, never across the face of slopes.
Do not carry passengers on tractor or attachment.
Avoid sudden turns or maneuvers.
Use caution when backing up to prevent damaging attachment.
Do not tow attachment on public roadways.
Do not remove warning decals from product.
Check product for worn, loose, or damaged parts before each use. If any damage is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or replace fasteners as needed before using.
Do not fasten rope to any part of your body or clothing.
Do not hold rope while tractor and Lawn Sweeper are in motion.
Do not use Lawn Sweeper near fire or smoldering debris.
Always fasten rope to tractor to avoid contact with wheels and brushes.
Always empty hopper before storing to avoid spontaneous combustion of contents.
Do not exceed tractor speed of 6 miles per hour when towing or operating Lawn Sweeper.

Warranty

IF YOU ARE MISSING PARTS DO NOT RETURN TO STORE
Email cs@ohiosteel.com or call 1-800-652-2321, ext. 212

Before you call, please email our customer service team at cs@ohiosteel.com with the following:

A description of the issue you are having
Photos of the issue that include an overall view and detailed view from multiple angles
If applicable, a short video showing the issue

Replacement Parts:
You can place your parts order online at ohiosteel.com/partsstore

You can also reach our Customer Service Department at 1-800-652-2321, ext. 212
If you are ordering replacement part(s) for your product, please note that some parts are only available as a repair kit.

If this product fails due to a defect in material or workmanship within THREE YEARS from the date of purchase, we will at our option, only with receipt of purchase, repair or replace it free of charge. This warranty excludes tires, wheels, brushes and bag, which are expendable and become worn during normal use.

This warranty does not cover:

Repairs necessary because of operator abuse or negligence.
Equipment used for commercial or rental purposes.
Paint that is worn or faded due to normal use or exposure.

To arrange for product repair visit ohiosteel.com/customer- support and fill out the warranty repair form. You can also call 1-800-652-2321, ext. 212 to speak to our Customer Service Team
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. This warranty applies only while this product is in use in the United States.

Carton Contents

TOOLS REQUIRED FOR ASSEMBLY:

9/16″ Wrench and Socket

Assembly Instructions

Attach Hitch Mount Tubes (19) to Sweeper Assembly and tighten hardware.
Attach Handle (3) to Height Adjustment (2) and tighten hardware.
Insert Hitch Tubes (18) into Hitch Mount Tubes (19) and snap into position.
Install hardware through front two holes of Hitch Tubes as shown.
Hold Adjustment Lever (4) in position and install third bolt through Lever as shown. Pin Adjustment Lever to Handle with Hair Pin (26).
Install Clevis Bars as shown (5 & 6); Clevis bolts (23) pass between Hitch Tube bolts. Tighten Hitch Tube hardware first, then tighten Clevis hardware.
Insert Bottom Frame Tubes (38) into Center Frame Tube (40) and snap into position. (Note that snap buttons are oriented up)
Unroll and flatten hopper bag (37) from shipping state. Then, slide Hopper Stop Bar (43) into pocket of Hopper Bag as shown.
First, place bottom frame assembly into bottom of Hopper Bag (37).
Second, Install Clevis Pins (45) through Hopper Bag (37), Hopper Stop Bar (41), and Bottom Frame Tubes (38) then secure with Hairpins(48).
Insert Top Frame Tubes (39) into Center Frame Tube (40) and snap into position.(Note that snap buttons are oriented down)
First, Place top frame assembly into Hopper Bag (37). Second, Install Clevis Pins (44) through Top Frame Tubes (39) and Bottom Frame Tubes (38) and secure with Hairpins (48).
Slide Hopper Pivot Rod (42) through Top Frame Tube (39) and Connecting Tube (36), then through pocket of Hopper Bag (37), and then through both Connecting Tube (36) and Top Frame Tube (39) on other side.
Secure both ends with Washer (46) and Hairpin (48).
First, unscrew Thumb Screw from Tension Tube Assembly (41). Next, Hold Hopper Bag (37) open and carefully insert Tension Tube Assembly (41) through opening in Hopper Bag and into hole in bottom Center Frame Tube (40). Pull top Center Frame Tube over tension tube and align holes.
Insert thumb screw that came with Tension Tube Assembly through top Center Frame Tube (40) and screw into top of Tension Tube. Secure Hopper Bag around Top Frame Tubes with Velcro tabs.
Insert Connecting Tubes (36) into Hitch Mount Tubes (19) and secure with Quick-Release Pins (47).
Install Hitch Pin (49) and secure with Hairpin (48).
Tie Dump Rope (51) securely around exposed section of Center Frame Tube (40).

Operating Instructions

Before Using Lawn Sweeper:

Read all Safety Rules found on page 1.

How to Sweep Lawn:

Remove large debris from lawn.
Do not sweep if conditions are too wet or muddy.
Attach Lawn Sweeper to tractor using supplied hitch pin. The multi-pronged hitch allows the Lawn Sweeper to accomodate varying tractor hitch heights; choose the appropriate setting so that Lawn Sweeper hitch tubes are roughly level with the ground.
Attach dump rope to tractor so that it cannot contact the brushes or wheels.
Start tractor engine and tow Lawn Sweeper to lawn.
Adjust brush height so that brushes extend roughly 1/2″ below the tips of the grass. For best performance, always set the brushes as high as possible to minimize resistance on brushes and wheels.
Engage tractor drive at its slowest speed and begin sweeping. Increase tractor speed as required to throw material to the back of the hopper bag.
Sweep in straight lines whenever possible and avoid sharp turns.
Periodically check the sweeper while operating to ensure that wheels and brushes are rotating smoothly and that nothing is wrapped around the brushes or brush shaft.
When filled, the hopper bag can be emptied by pulling the dump rope forward.

How to Adjust Brush Height:

Remove hairpin and detach adjustment lever from handle.
Move handle downwards to raise the brush height or upwards to lower the brush height.
Align the handle pin with the nearest hole in the adjustment lever. Use the top or bottom pin on the handle, whichever provides the best alignment.
Secure adjustment lever to handle with hairpin.

Storing Lawn Sweeper:

Empty hopper bag and thoroughly clean Lawn Sweeper before storing.
Store Lawn Sweeper away from excessive heat to prevent damage.
Brushes must not contact ground during storage to prevent damage.
Remove quick-release pins to separate hopper bag from Lawn Sweeper.
Carefully remove tension tube and collapse hopper bag for compact storage.
Unpin and detach adjustment lever from handle and then depress snap buttons to remove hitch tubes from Lawn Sweeper for compact storage.

Periodic Maintenance

Tighten fasteners as needed before each use
Empty hopper and thoroughly clean Lawn Sweeper after each use
Remove any materials that have wrapped around brushes or brush shaft after each use
Lubricate wheel bearings and gears annually with a light coating of white lithium grease